Announcement

Collapse
No announcement yet.

Any interest in wireless RGB LED strip lights with HomeSeer?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Very nice Geary!
    - Pete

    Auto mator
    Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
    Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
    HS4 Lite - Ubuntu 20.04 / VB W7e Jetway JBC420U591
    Fanless Intel® Celeron N3160 SoC 8Gb
    HS4 Pro - V4.1.18.1 - Ubuntu 20.04/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb
    HSTouch on Intel tabletop tablets

    X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

    Comment


      Hello Kevin,

      Testing this morning on HS3 running on Ubuntu 12.04.

      Steps I did:

      1 - Shut down HS3
      2 - copied the HSPI_RGB3P.exe and html/images directory to the Homeseer 3 directory.
      3 - started HS3
      4 - enabled the plugin
      5 - HS3 created 3 controllers
      6 - changed network to serial on controller #1
      7 - put /dev/ttyUSB1 in the com port section for controller #1
      8 - tested control of RGB controller via devices on HS3

      Works fine. I am seeing this in the HS3 logs right now non stop.

      [1/22/2014 7:06:10 AM] - Receive Buffer - (3883) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3884) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3885) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3886) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3887) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3888) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3889) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3890) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3891) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3892) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3893) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3894) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3895) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3896) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3897) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3898) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3899) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3900) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3901) - 0
      [1/22/2014 7:06:10 AM] - Receive Buffer - (3902) - 0
      Thank-you Kevin!
      Last edited by Pete; January 22, 2014, 08:18 AM.
      - Pete

      Auto mator
      Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
      Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
      HS4 Lite - Ubuntu 20.04 / VB W7e Jetway JBC420U591
      Fanless Intel® Celeron N3160 SoC 8Gb
      HS4 Pro - V4.1.18.1 - Ubuntu 20.04/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb
      HSTouch on Intel tabletop tablets

      X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

      Comment


        Scott ,

        1) The RJ12 cable is for connect with X10 XM10 or TW523 or PLCBUS . If you only control it by Ethernet , so no need RJ12 cable.

        2) I didn't aware the exchange rate module for the on-line store , seem it have problem cannot auto. update the exchange rate , since my X10 or PLCBUS devices are for 220V AC , I don't have US customer , so over 95% customer check out by Pound. You can check it out by Pound , I will try to fix the exchange rate module.

        Thanks

        Comment


          Originally posted by Pete View Post
          Hello Kevin,

          Testing this morning on HS3 running on Ubuntu 12.04.

          Steps I did:

          1 - Shut down HS3
          2 - copied the HSPI_RGB3P.exe and html/images directory to the Homeseer 3 directory.
          3 - started HS3
          4 - enabled the plugin
          5 - HS3 created 3 controllers
          6 - changed network to serial on controller #1
          7 - put /dev/ttyUSB1 in the com port section for controller #1
          8 - tested control of RGB controller via devices on HS3

          Works fine. I am seeing this in the HS3 logs right now non stop.



          Thank-you Kevin!
          Pete , try to test on Windows , I didn't test on Linux. I need to create a Ubuntu VM in my Esxi machine. But let me finish and fine tune the Windows version first.

          Comment


            try to test on Windows
            I do have an HS3 running on a Wintel box and will test today.
            - Pete

            Auto mator
            Homeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
            Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
            HS4 Lite - Ubuntu 20.04 / VB W7e Jetway JBC420U591
            Fanless Intel® Celeron N3160 SoC 8Gb
            HS4 Pro - V4.1.18.1 - Ubuntu 20.04/VB W7e 64 bit Intel Kaby Lake CPU - 32Gb
            HSTouch on Intel tabletop tablets

            X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Smartthings hub, Hubitat Hub, and Home Assistant

            Comment


              Originally posted by Kevin Lo View Post
              Scott ,
              I don't have US customer , so over 95% customer check out by Pound. You can check it out by Pound , I will try to fix the exchange rate module.

              Thanks
              sooo. those of us in US get refunds ?
              Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

              Comment


                Originally posted by gearyt View Post
                sooo. those of us in US get refunds ?
                Yes , if paid by Paypal in USD , i will issue refund to their account.
                But not affect paid by PayPal in GBP.

                Geary , did u receive your controller ?
                I send it by EMS , u should receive it very soon.

                Comment


                  not yet.. everything is ready for me to hook up, software is loaded, trim ready to paint

                  are you going to be able to have plug-in change to music ?

                  BTW... Wife loves it !!
                  Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

                  Comment


                    Originally posted by Kevin Lo View Post
                    .
                    Geary , did u receive your controller ?
                    I send it by EMS , u should receive it very soon.
                    got it off to go play !!
                    Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

                    Comment


                      got it powered up.. how do I set IP, find the MAC and enter password to join wireless network
                      Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

                      Comment


                        Originally posted by gearyt View Post
                        got it powered up.. how do I set IP, find the MAC and enter password to join wireless network
                        If you look in post #42 on this thread there is a PDF user manual. Page three has all the details on it of what to do, basically you will need to connect a computer to it via wifi, browse to its web address, change a couple of settings and then you are away.

                        Comment


                          Thanks...
                          Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

                          Comment


                            Originally posted by Kevin Lo View Post
                            Already finish the basic function of HS3 plug-in.
                            For the 1st time run , it will create three controller . If you only need one , just delete the unused devices. Don't forget to switch the Device View.
                            This plug-in work for Network Access and Serial Access.
                            Script API document will upload later.

                            To Pete , please test it for Serial access , I work fine in here.

                            To Ken , you can also test for mult-controller.

                            I only test this plug-in in HS3 v3.0.0.54 under Windows 7 , not yet test on Linux.

                            Thanks again to mrhappy for the HS3 plug-in template.
                            Kevin,

                            The plug in is working great with WIFI and the Three controllers it w2as very simple to setup and it connected immediately the setup cound no be any easier are their any scripting calls that will work with the plug in yet or is that still in the works

                            I am running on Win 8 64bit with version 3.0.0.55
                            Cheers Ken
                            HSPRO,HS3PRO, BLsecurity, , MCSxap, HSTouch Android, UltraGCIR, CM15a, USBUIRT, BLUSBUIRT, WIFIRGB, BLAB8SS, BLcontrol, BLGData, BLLAN,BLOccupied, BLRadar, BLVolume, iTunesDAAP, UltraGCIR3, Airplayspeak, BLalarm, BLbackup, BLLED, BLrandom, BLReminders, BLRF, BL Speech, Hyperion, IFTTT, KINECT, XBMC, MCSprinkers PRO, PHLocation, ULtrapioneer, Ultralog, ultraweatherbug, Z,troller, GC-100, GC WIFICC, GC-WIFI SERIAL, Nitrogen logic depth camera controllers,

                            Comment


                              Originally posted by kenrad View Post
                              Kevin,

                              The plug in is working great with WIFI and the Three controllers it w2as very simple to setup and it connected immediately the setup cound no be any easier are their any scripting calls that will work with the plug in yet or is that still in the works

                              I am running on Win 8 64bit with version 3.0.0.55
                              Cheers Ken
                              Ken , the script API already include. Yesterday no time to write the document.
                              Please see attach PDF and sample scripts.
                              Attached Files

                              Comment


                                Originally posted by Kevin Lo View Post
                                Scott ,

                                1) The RJ12 cable is for connect with X10 XM10 or TW523 or PLCBUS . If you only control it by Ethernet , so no need RJ12 cable.

                                2) I didn't aware the exchange rate module for the on-line store , seem it have problem cannot auto. update the exchange rate , since my X10 or PLCBUS devices are for 220V AC , I don't have US customer , so over 95% customer check out by Pound. You can check it out by Pound , I will try to fix the exchange rate module.

                                Thanks
                                Ordered!
                                Last edited by scott12v; January 24, 2014, 09:12 AM.

                                Comment

                                Working...
                                X