Very nice Geary!
Announcement
Collapse
No announcement yet.
Any interest in wireless RGB LED strip lights with HomeSeer?
Collapse
X
-
- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
HS4 Lite - Ubuntu 22.04 / Lenovo Tiny M900 / 32Gb Ram
HS4 Pro - V4.1.18.1 - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
-
Hello Kevin,
Testing this morning on HS3 running on Ubuntu 12.04.
Steps I did:
1 - Shut down HS3
2 - copied the HSPI_RGB3P.exe and html/images directory to the Homeseer 3 directory.
3 - started HS3
4 - enabled the plugin
5 - HS3 created 3 controllers
6 - changed network to serial on controller #1
7 - put /dev/ttyUSB1 in the com port section for controller #1
8 - tested control of RGB controller via devices on HS3
Works fine. I am seeing this in the HS3 logs right now non stop.
[1/22/2014 7:06:10 AM] - Receive Buffer - (3883) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3884) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3885) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3886) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3887) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3888) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3889) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3890) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3891) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3892) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3893) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3894) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3895) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3896) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3897) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3898) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3899) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3900) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3901) - 0
[1/22/2014 7:06:10 AM] - Receive Buffer - (3902) - 0Last edited by Pete; January 22, 2014, 08:18 AM.- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
HS4 Lite - Ubuntu 22.04 / Lenovo Tiny M900 / 32Gb Ram
HS4 Pro - V4.1.18.1 - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
-
Scott ,
1) The RJ12 cable is for connect with X10 XM10 or TW523 or PLCBUS . If you only control it by Ethernet , so no need RJ12 cable.
2) I didn't aware the exchange rate module for the on-line store , seem it have problem cannot auto. update the exchange rate , since my X10 or PLCBUS devices are for 220V AC , I don't have US customer , so over 95% customer check out by Pound. You can check it out by Pound , I will try to fix the exchange rate module.
Thanks
Comment
-
Originally posted by Pete View PostHello Kevin,
Testing this morning on HS3 running on Ubuntu 12.04.
Steps I did:
1 - Shut down HS3
2 - copied the HSPI_RGB3P.exe and html/images directory to the Homeseer 3 directory.
3 - started HS3
4 - enabled the plugin
5 - HS3 created 3 controllers
6 - changed network to serial on controller #1
7 - put /dev/ttyUSB1 in the com port section for controller #1
8 - tested control of RGB controller via devices on HS3
Works fine. I am seeing this in the HS3 logs right now non stop.
Thank-you Kevin!
Comment
-
try to test on Windows- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
HS4 Lite - Ubuntu 22.04 / Lenovo Tiny M900 / 32Gb Ram
HS4 Pro - V4.1.18.1 - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
-
Originally posted by Kevin Lo View PostScott ,
I don't have US customer , so over 95% customer check out by Pound. You can check it out by Pound , I will try to fix the exchange rate module.
ThanksUbuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎
Comment
-
Originally posted by gearyt View Postgot it powered up.. how do I set IP, find the MAC and enter password to join wireless network
Comment
-
Originally posted by Kevin Lo View PostAlready finish the basic function of HS3 plug-in.
For the 1st time run , it will create three controller . If you only need one , just delete the unused devices. Don't forget to switch the Device View.
This plug-in work for Network Access and Serial Access.
Script API document will upload later.
To Pete , please test it for Serial access , I work fine in here.
To Ken , you can also test for mult-controller.
I only test this plug-in in HS3 v3.0.0.54 under Windows 7 , not yet test on Linux.
Thanks again to mrhappy for the HS3 plug-in template.
The plug in is working great with WIFI and the Three controllers it w2as very simple to setup and it connected immediately the setup cound no be any easier are their any scripting calls that will work with the plug in yet or is that still in the works
I am running on Win 8 64bit with version 3.0.0.55
Cheers KenHSPRO,HS3PRO, BLsecurity, , MCSxap, HSTouch Android, UltraGCIR, CM15a, USBUIRT, BLUSBUIRT, WIFIRGB, BLAB8SS, BLcontrol, BLGData, BLLAN,BLOccupied, BLRadar, BLVolume, iTunesDAAP, UltraGCIR3, Airplayspeak, BLalarm, BLbackup, BLLED, BLrandom, BLReminders, BLRF, BL Speech, Hyperion, IFTTT, KINECT, XBMC, MCSprinkers PRO, PHLocation, ULtrapioneer, Ultralog, ultraweatherbug, Z,troller, GC-100, GC WIFICC, GC-WIFI SERIAL, Nitrogen logic depth camera controllers,
Comment
-
Originally posted by kenrad View PostKevin,
The plug in is working great with WIFI and the Three controllers it w2as very simple to setup and it connected immediately the setup cound no be any easier are their any scripting calls that will work with the plug in yet or is that still in the works
I am running on Win 8 64bit with version 3.0.0.55
Cheers Ken
Please see attach PDF and sample scripts.
Comment
-
Originally posted by Kevin Lo View PostScott ,
1) The RJ12 cable is for connect with X10 XM10 or TW523 or PLCBUS . If you only control it by Ethernet , so no need RJ12 cable.
2) I didn't aware the exchange rate module for the on-line store , seem it have problem cannot auto. update the exchange rate , since my X10 or PLCBUS devices are for 220V AC , I don't have US customer , so over 95% customer check out by Pound. You can check it out by Pound , I will try to fix the exchange rate module.
ThanksLast edited by scott12v; January 24, 2014, 09:12 AM.
Comment
Comment