Hallo
I have used HS since 2008 with no major problems on RFXCOM network interface with HomeEasy switches, dimmers, plugs and motion sensors. There was some delays and of course no status feedback from the devices but it was working.
Recently my RFXCOM packed up I purchased USB replacement and it works.
I decided to go with the progress and start using Z-Wave
I got Z Wave Aeon USB Series 2 Adapter with Battery and researched what can I get.
I choose Fibaro, got some samples for testing and the problem started.
I pugged in z-wave stick and it installed drivers automatically. I enabled it in HS2on COM port 5
than I replaced my existing HE motion sensor and HE dimmer with Z-wave Fibaro multi sensor and Fibaro dimmer.
I added nodes in HS2 and it showed me multisensory as 5 devices
And dimmer as Fibaro dimmer but there is no option to dim?
Additionally when on Status page of HS2 I have only on off and when I press on the light is switching on and when I am truing to press off nothing is happening no reaction I have to refresh the status webpage and than I can switch off, again once I switch off I can not switch on until I refresh the page?
I created the event that should switch on the light based on status od the device motion sensor to be on and switch od after 45 seconds if there is no motion so basically delayed action.
It switches on and off but it does not react on motion to delete delayed action. I looked on the hs log and I see that motion sensor is reacting on motion only every couple of minutes. temperature is not updating,
And sometimes as you see motion is detected every couple of seconds and sometimes it is not
so what am I doing wrong?
Just to add that the status temperature and luminosity are not updating at all
I have used HS since 2008 with no major problems on RFXCOM network interface with HomeEasy switches, dimmers, plugs and motion sensors. There was some delays and of course no status feedback from the devices but it was working.
Recently my RFXCOM packed up I purchased USB replacement and it works.
I decided to go with the progress and start using Z-Wave
I got Z Wave Aeon USB Series 2 Adapter with Battery and researched what can I get.
I choose Fibaro, got some samples for testing and the problem started.
I pugged in z-wave stick and it installed drivers automatically. I enabled it in HS2on COM port 5
than I replaced my existing HE motion sensor and HE dimmer with Z-wave Fibaro multi sensor and Fibaro dimmer.
I added nodes in HS2 and it showed me multisensory as 5 devices
Display or Edit User Note for Root Device 4 No Status Z-Wave Z-Wave Interface Root Device 4 Q1 (4) Z-Wave Root Device Never Set
Display or Edit User Note for Child 4 Battery Battery Level 100% Z-Wave Z-Wave Interface Child 4 Battery Q2 Z-Wave Battery Today 21:16:04
Display or Edit User Note for Child 4 General Purpose Alarm In Alarm Z-Wave Z-Wave Interface Child 4 General Purpose Alarm Q3 Z-Wave Alarm Sensor Never Set
Display or Edit User Note for Child 4 Sensor Binary Off-Closed-No Motion Z-Wave Z-Wave Interface Child 4 Sensor Binary Q4 Z-Wave Sensor Binary Today 22:40:06
Display or Edit User Note for Child 4 Temperature 29.7 C Z-Wave Z-Wave Interface Child 4 Temperature Q5 Z-Wave Multilevel Sensor Temperature Today 21:16:04
Display or Edit User Note for Child 4 Luminance 2 Lux Z-Wave Z-Wave Interface Child 4 Luminance Q6 Z-Wave Multilevel Sensor Luminance Today 21:16:04
Display or Edit User Note for Child 4 Battery Battery Level 100% Z-Wave Z-Wave Interface Child 4 Battery Q2 Z-Wave Battery Today 21:16:04
Display or Edit User Note for Child 4 General Purpose Alarm In Alarm Z-Wave Z-Wave Interface Child 4 General Purpose Alarm Q3 Z-Wave Alarm Sensor Never Set
Display or Edit User Note for Child 4 Sensor Binary Off-Closed-No Motion Z-Wave Z-Wave Interface Child 4 Sensor Binary Q4 Z-Wave Sensor Binary Today 22:40:06
Display or Edit User Note for Child 4 Temperature 29.7 C Z-Wave Z-Wave Interface Child 4 Temperature Q5 Z-Wave Multilevel Sensor Temperature Today 21:16:04
Display or Edit User Note for Child 4 Luminance 2 Lux Z-Wave Z-Wave Interface Child 4 Luminance Q6 Z-Wave Multilevel Sensor Luminance Today 21:16:04
Additionally when on Status page of HS2 I have only on off and when I press on the light is switching on and when I am truing to press off nothing is happening no reaction I have to refresh the status webpage and than I can switch off, again once I switch off I can not switch on until I refresh the page?
I created the event that should switch on the light based on status od the device motion sensor to be on and switch od after 45 seconds if there is no motion so basically delayed action.
It switches on and off but it does not react on motion to delete delayed action. I looked on the hs log and I see that motion sensor is reacting on motion only every couple of minutes. temperature is not updating,
07/07/2014 22:39:45 - Device Control - Device: GF Kitchen light (A5) OFF
07/07/2014 22:39:45 - Event - Deleting event after run: "Delayed Actions light (delayed action)"
07/07/2014 22:39:45 - Event - Event Trigger "Switch B14 Blob Lamp (delayed action)-1"
07/07/2014 22:39:45 - Device Control - Device: 1 Mst bedroom Switch B14 Blob Lamp (B14) OFF
07/07/2014 22:39:45 - Event - Deleting event after run: "Delayed Actions Switch B14 Blob Lamp (delayed action)-1"
07/07/2014 22:40:06 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:40:26 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 Off Dimval: 0 Data: 0
07/07/2014 22:40:26 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D Off
07/07/2014 22:41:44 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:42:23 - Event - Event Trigger "Light (delayed action)"
07/07/2014 22:42:23 - Device Control - Device: Hall 1st floorLight Preset Dim Level 0 [0%]
07/07/2014 22:42:23 - Event - Deleting event after run: "Delayed Actions Light (delayed action)"
07/07/2014 22:42:36 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:42:39 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:43:45 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:43:45 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:43:45 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:45 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:45 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:45 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:45 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:52 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:43:52 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:43:52 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:52 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:52 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:52 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:52 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:52 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:58 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:43:58 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:43:58 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:58 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:58 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:58 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:58 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:58 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:04 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:04 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:04 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:04 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:04 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:04 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:04 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:04 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:11 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:11 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:11 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:11 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:11 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:11 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:11 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:11 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:17 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:17 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:17 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:17 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:17 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:17 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:17 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:17 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:24 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:24 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:24 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:24 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:24 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:24 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:24 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:24 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:38 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:38 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:38 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:38 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:38 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:38 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:38 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:38 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:45:36 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 Off Dimval: 0 Data: 0
07/07/2014 22:45:36 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D Off
07/07/2014 22:47:38 - Event - Event Trigger "Light (delayed action)"
07/07/2014 22:47:38 - Device Control - Device: Hall 1st floorLight Preset Dim Level 0 [0%]
07/07/2014 22:47:38 - Event - Deleting event after run: "Delayed Actions Light (delayed action)"
07/07/2014 22:48:01 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:48:09 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:50:30 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:50:38 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:51:35 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:51:36 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:39:45 - Event - Deleting event after run: "Delayed Actions light (delayed action)"
07/07/2014 22:39:45 - Event - Event Trigger "Switch B14 Blob Lamp (delayed action)-1"
07/07/2014 22:39:45 - Device Control - Device: 1 Mst bedroom Switch B14 Blob Lamp (B14) OFF
07/07/2014 22:39:45 - Event - Deleting event after run: "Delayed Actions Switch B14 Blob Lamp (delayed action)-1"
07/07/2014 22:40:06 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:40:26 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 Off Dimval: 0 Data: 0
07/07/2014 22:40:26 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D Off
07/07/2014 22:41:44 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:42:23 - Event - Event Trigger "Light (delayed action)"
07/07/2014 22:42:23 - Device Control - Device: Hall 1st floorLight Preset Dim Level 0 [0%]
07/07/2014 22:42:23 - Event - Deleting event after run: "Delayed Actions Light (delayed action)"
07/07/2014 22:42:36 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:42:39 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:43:45 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:43:45 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:43:45 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:45 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:45 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:45 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:45 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:52 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:43:52 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:43:52 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:52 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:52 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:52 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:52 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:52 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:58 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:43:58 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:43:58 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:58 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:58 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:43:58 - Event - Event Trigger "Bathroom"
07/07/2014 22:43:58 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:43:58 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:04 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:04 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:04 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:04 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:04 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:04 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:04 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:04 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:11 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:11 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:11 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:11 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:11 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:11 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:11 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:11 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:17 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:17 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:17 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:17 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:17 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:17 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:17 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:17 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:24 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:24 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:24 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:24 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:24 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:24 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:24 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:24 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:38 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 On Dimval: 0 Data: 0
07/07/2014 22:44:38 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D On
07/07/2014 22:44:38 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:38 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:38 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:44:38 - Event - Event Trigger "Bathroom"
07/07/2014 22:44:38 - Event - Delayed Device Action Removed: Hall 1st floor FF Light
07/07/2014 22:44:38 - Device Control - Device: Hall 1st floorLight Preset Dim Level 31 [100%]
07/07/2014 22:45:36 - Device Control - Command sent to FF Bathroom 1st floor Motion Sensor Bathroom: D15 Off Dimval: 0 Data: 0
07/07/2014 22:45:36 - X10 Received - D15 (FF Bathroom 1st floor Motion Sensor Bathroom) D Off
07/07/2014 22:47:38 - Event - Event Trigger "Light (delayed action)"
07/07/2014 22:47:38 - Device Control - Device: Hall 1st floorLight Preset Dim Level 0 [0%]
07/07/2014 22:47:38 - Event - Deleting event after run: "Delayed Actions Light (delayed action)"
07/07/2014 22:48:01 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:48:09 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:50:30 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:50:38 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
07/07/2014 22:51:35 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to OFF/CLOSED/NO MOTION
07/07/2014 22:51:36 - Device Update - Device: Z-Wave Z-Wave Interface Child 4 Sensor Binary Status set to ON/OPEN/MOTION
so what am I doing wrong?
Just to add that the status temperature and luminosity are not updating at all