Hi,
I am hoping someone can help.
I want to interface a heating system with 8 zones into Homeseer HS3 Pro.
I am UK based, running HS3 Pro virtualised in hyper V. Finally stable running x10, currentcost, Sonos, Weather XML, Netcam and Zwave for plug in devices/lights only. My ZWave is 3.0.0.150 and HS3 Pro is 3.0.0.96. It took a while to get to the stage after leaving HS2 behind.
I do have 3 Horstmann HRT4-ZW stats on 3 zones that I have tried and failed to get working in homeseer via zwave and also tried BLstat. I have followed many threads but cannot get the thermostats to report setpoints or actual temperature. I can get HS to turn the boiler switch on/off but that's about it. The problem with running these stats without HS is there is no timer. I was hoping to use HS to change the setpoints at various times of the day.
Additionally I have a heatmiser PRT-TS that works fine via wifi/web browser or app but no known interface to homeseer. However given it is IP based and there is an API this must be interfacable somehow.
Ideally I would like to stick with zwave/horstmann but I have spent 20 hours plus on this with no luck. Should I carry on or wait for someone to interface a wifi stat into homeseer ?
I would like to avoid serial stats due to virtual running of HS if possible.
Any ideas would be appreciate particularly is you have Horstmann working with HS3 Pro as this would be my lowest cost route.
Bear in mind I will have to purchase 8 thermostats which is a large investment and I want stability. Ideally something that will work if homeseer ever fails.
Any help much appreciated. I am sure it must be possible to get either wifi or z wave stats working in the UK for HS3 Pro!
Forgot to add zwave controller is an Aeon Labs Z stick running over a USB network hub) works fine for zwave lights/plugs)
I would also like to put 3-4 zwave tankstats on my thermal store that controls the heating. any recommendations for tank stats that will work with HS3 pro ?
I am hoping someone can help.
I want to interface a heating system with 8 zones into Homeseer HS3 Pro.
I am UK based, running HS3 Pro virtualised in hyper V. Finally stable running x10, currentcost, Sonos, Weather XML, Netcam and Zwave for plug in devices/lights only. My ZWave is 3.0.0.150 and HS3 Pro is 3.0.0.96. It took a while to get to the stage after leaving HS2 behind.
I do have 3 Horstmann HRT4-ZW stats on 3 zones that I have tried and failed to get working in homeseer via zwave and also tried BLstat. I have followed many threads but cannot get the thermostats to report setpoints or actual temperature. I can get HS to turn the boiler switch on/off but that's about it. The problem with running these stats without HS is there is no timer. I was hoping to use HS to change the setpoints at various times of the day.
Additionally I have a heatmiser PRT-TS that works fine via wifi/web browser or app but no known interface to homeseer. However given it is IP based and there is an API this must be interfacable somehow.
Ideally I would like to stick with zwave/horstmann but I have spent 20 hours plus on this with no luck. Should I carry on or wait for someone to interface a wifi stat into homeseer ?
I would like to avoid serial stats due to virtual running of HS if possible.
Any ideas would be appreciate particularly is you have Horstmann working with HS3 Pro as this would be my lowest cost route.
Bear in mind I will have to purchase 8 thermostats which is a large investment and I want stability. Ideally something that will work if homeseer ever fails.
Any help much appreciated. I am sure it must be possible to get either wifi or z wave stats working in the UK for HS3 Pro!
Forgot to add zwave controller is an Aeon Labs Z stick running over a USB network hub) works fine for zwave lights/plugs)
I would also like to put 3-4 zwave tankstats on my thermal store that controls the heating. any recommendations for tank stats that will work with HS3 pro ?
Comment