Announcement

Collapse
No announcement yet.

Help with Evolve Thermostat

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help with Evolve Thermostat

    Suddenly my thermostat is reporting current temperature as "Dim 71%"-regardless of what the temperature really is. Wife is not happy. This happend after my new touch screen somehow put the system in cool mode last night-not good in Minnesota in winter.
    The thermostat seems to work and I can change the set points from HS3. Anyone have an idea how I can get this working again?

    #2
    Where is it reporting that? On HS Touch? Does it show correctly on the HS web interface? Which versions of HS3, HS Touch, etc?

    Cheers
    Al
    HS 3.0.0.548: 1990 Devices 1172 Events
    Z-Wave 3.0.1.262: 126 Nodes on one Z-Net

    Comment


      #3
      Originally posted by sparkman View Post
      Where is it reporting that? On HS Touch? Does it show correctly on the HS web interface? Which versions of HS3, HS Touch, etc?

      Cheers
      Al
      Reports as stated on the HS web interface-no an HSTouch problem. HS3 Pro v. 3.0.0.96, HSTouch v 3.0.0.50.

      Comment


        #4
        Originally posted by jrjmpls7 View Post
        Reports as stated on the HS web interface-no an HSTouch problem. HS3 Pro v. 3.0.0.96, HSTouch v 3.0.0.50.
        Maybe rescan the thermostat from the z-wave tab of the root device. Which version of the z-wave plugin are you running?

        Cheers
        Al
        HS 3.0.0.548: 1990 Devices 1172 Events
        Z-Wave 3.0.1.262: 126 Nodes on one Z-Net

        Comment


          #5
          Originally posted by sparkman View Post
          Maybe rescan the thermostat from the z-wave tab of the root device. Which version of the z-wave plugin are you running?

          Cheers
          Al
          Z-wave v. 3.0.0.187. Rescan shows this error in log:
          Z-Wave Error (2) Sensor Multilevel Report for type Air_Temperature received, but the corresponding device Node ID cannot be found.(2) Node/Instance=4/-1
          There is a device for the temp so I'm don't understand the error.

          Comment


            #6
            First thing I would do is to try and optimize it a few times and then try re-scanning it again. If that doesn't work, I would delete the devices from HS and then re-import the thermostat.

            Cheers
            Al
            HS 3.0.0.548: 1990 Devices 1172 Events
            Z-Wave 3.0.1.262: 126 Nodes on one Z-Net

            Comment

            Working...
            X