Announcement

Collapse
No announcement yet.

Value change on Schlage lock not available?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Value change on Schlage lock not available?

    All-

    I have used Quickset locks in another home and when the devices were first created the "Alarm" device also populated with a long list of codes..
    21 Locked with Lever
    22 Unlocked with Lever
    .
    .
    161 Three Keypad Failures
    etc...

    However I see no such code list for the new Schlage locks in any of the parent of child devices. I also in review of the log do not see codes being written fromt he devices other than 0 and 255 when I send the associated Lock or Unlock Event from HS.

    I have seen other threads where users discuss these codes for Schlage. My locks appear to be working normally. Did I do an install incorrectly somehow or should I be creating these codes manually in the Alarm devices with the help of some documentation I missed along the way?

    Any help is appreciated.

    Ross

    #2
    this is the only notification window I have seen
    Attached Files
    Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

    Comment


      #3
      Thank you however I am not sure what that is?
      For further clarity, I am looking for the Schlage list like the attached I have for the Quickset. Values and associated Status.
      Ross
      Attached Files

      Comment


        #4
        what I show is a window that has the message change upon what opened/locked the lock IE: manual, user 1, etc
        I haven't seen what you show in the root
        Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

        Comment


          #5
          Geary,
          Here is my device list for HS 2.5.0.81 for my two Schlage's. Where would you go from here to see the values?

          Ross
          Attached Files

          Comment


            #6
            Front Door, Garage Side Door, and main Garage Door
            note, different devices due to different firmware on Schlages
            Attached Files
            Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

            Comment


              #7
              Gary,
              Thank you for continuing.
              Where would you read the status/message/code that one of those devices was unlocked from a manual knob twist or unlocked from HS event or User002 used their code to unlock?

              R

              Comment


                #8
                Originally posted by ross_ditlove View Post
                Gary,
                Thank you for continuing.
                Where would you read the status/message/code that one of those devices was unlocked from a manual knob twist or unlocked from HS event or User002 used their code to unlock?

                R
                same window. I would post pic, but system is being rebuilt
                Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

                Comment


                  #9
                  here is a different change
                  Attached Files
                  Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

                  Comment


                    #10
                    Originally posted by gearyt View Post
                    here is a different change
                    I am using the Notification field to notify me in certain circumstances of people locking/unlocking the door:

                    e.g.

                    IF
                    Main Floor Hall Schlage Lock - Notification changes and becomes User Code 1 Entered
                    THEN
                    Do Something

                    I have not tracked the notification values for other activities, but you could probably force the codes out by triggering the types of lock events that you want to capture. I think it will tell you if a bad code is entered but I am not sure if it will tell you if 3 successive bad codes are entered, though you may be able to track that with a counter and timer etc etc

                    It probably also sends notifications for tampering, but you'd need to try it see. I certainly haven't ever run across a list of notification messages for these locks
                    cheeryfool

                    Comment


                      #11
                      I have seen bolt problem when batterys are low and bolt did not completely lock
                      Ubuntu on the Intel NUC ( 8i5BEK ), 32 G, 250G SSD, V4 Pro 😎

                      Comment


                        #12
                        Originally posted by cheeryfool View Post
                        I am using the Notification field to notify me in certain circumstances of people locking/unlocking the door:

                        e.g.

                        IF
                        Main Floor Hall Schlage Lock - Notification changes and becomes User Code 1 Entered
                        THEN
                        Do Something

                        I have not tracked the notification values for other activities, but you could probably force the codes out by triggering the types of lock events that you want to capture. I think it will tell you if a bad code is entered but I am not sure if it will tell you if 3 successive bad codes are entered, though you may be able to track that with a counter and timer etc etc

                        It probably also sends notifications for tampering, but you'd need to try it see. I certainly haven't ever run across a list of notification messages for these locks
                        What I continue to find confusing here is the very extensive list f codes that the Quickset lock has available. When the device was imported years ago a list of 50 or more codes (as I described above) were imported as Value variables. The Schlage appears to have three. This is really frustrating and I am surprised I am the only one that has experienced this -OR- I did something wrong, the codes are there and I dont see them.

                        Really scratching my head over this.
                        R

                        Comment


                          #13
                          Originally posted by cheeryfool View Post
                          I am using the Notification field to notify me in certain circumstances of people locking/unlocking the door:

                          e.g.

                          IF
                          Main Floor Hall Schlage Lock - Notification changes and becomes User Code 1 Entered
                          THEN
                          Do Something

                          I have not tracked the notification values for other activities, but you could probably force the codes out by triggering the types of lock events that you want to capture. I think it will tell you if a bad code is entered but I am not sure if it will tell you if 3 successive bad codes are entered, though you may be able to track that with a counter and timer etc etc

                          It probably also sends notifications for tampering, but you'd need to try it see. I certainly haven't ever run across a list of notification messages for these locks
                          Let me also add that what your doing is exactly what I want to do. I also wonder aloud if this is something in HS3 that HS2 (Which I remain on) does not display nor log?

                          R

                          Comment


                            #14
                            Sparkman helped me out here:
                            http://board.homeseer.com/showthread.php?t=172326
                            Jim
                            ----
                            Plugins:Z Wave 3.0.1.55, HS3 Pro 3.0.0.208, HS3Touch, HS3Touch IOS, Z-Net, SceneMaster, XBMC, Sonos, Media Controller, Envisalink (52 Virtual nodes), JowiHue, EasyTrigger, Liftmaster MyQ, BLBackup, BLLAN, BLRadar, Pushover

                            Devices:Cooper RF9540, Cooper Scene, Yale Locks, Sonos, Phillips Hue and Lux, DSC, Somfy Blinds

                            Comment


                              #15
                              Originally posted by 519zwave View Post

                              I am wondering if I happen to have a lock/version that does not have all the normal values available? Is that possible?
                              This Schlage offers only the following below that I found in the Child device. This of course is versus what we all normally see (including what my Quicksets have), a long list of Values that can be used.
                              Ross
                              Attached Files

                              Comment

                              Working...
                              X