Well it's Thursday and after hours according to their office recording. I haven't seen or heard anything that the Firmware was posted. Still new here and trying to gauge the accuracy of dates. Whats normal?
Announcement
Collapse
No announcement yet.
Firmware for HS-WD100+
Collapse
X
-
Originally posted by macromark View PostThe firmware is undergoing testing right now and there are a few issues to work out. This will delay the release a few days. Please be patient. This is a high priority project for us and we are working to get it out as quickly as possible but We WILL NOT RELEASE IT WITH KNOWN PROBLEMS.
Comment
-
Originally posted by macromark View PostThe firmware is undergoing testing right now and there are a few issues to work out. This will delay the release a few days. Please be patient. This is a high priority project for us and we are working to get it out as quickly as possible but We WILL NOT RELEASE IT WITH KNOWN PROBLEMS.
Comment
-
Originally posted by ServiceXp View PostThank you Mark, the last thing we need is to exchange one problem with another.
Originally posted by jseer View PostWe would like to not give out the older firmware when we are very close to having the new firmware finished.
Comment
-
Originally posted by macromark View PostThe firmware is undergoing testing right now and there are a few issues to work out. This will delay the release a few days. Please be patient. This is a high priority project for us and we are working to get it out as quickly as possible but We WILL NOT RELEASE IT WITH KNOWN PROBLEMS.
Mark appreciate the thoroughness. Can you answer if it will include the ramp control added back in? That is the only thing I have been waiting on.
Comment
-
Originally posted by waynehead99 View PostMark appreciate the thoroughness. Can you answer if it will include the ramp control added back in? That is the only thing I have been waiting on.
Comment
-
Originally posted by waynehead99 View PostYou are my new favorite person for the day!! Thanks!
Comment
-
FIRMWARE FLASHING WARNING
Warning: Most Z-Wave wall switches are based on Sigma reference designs. Because of this, it's "possible" to flash a switch with the wrong firmware. A couple folks have already discovered that by inadvertently flashing HS-WD100+ dimmers with HS-WS100+ firmware. In that case, the situation can be reversed by re-flashing the dimmers with the forthcoming HomeSeer firmware. We do intend to add some checks in the Z-Wave plug-in to prevent that going forward.
HOWEVER, if you flash a HomeSeer dimmer or switch with firmware from another manufacturer, you'll void the warranty on the HomeSeer product AND (equally importantly) that product will no longer be able to be flashed with HomeSeer firmware (including any future releases). Please do not do this!!
Comment
Comment