Announcement
Collapse
No announcement yet.
HomeSeer Mobile Beta V 1.0.2 (9) (IOS)
Collapse
This topic is closed.
X
X
-
HomeSeer Mobile officially released: https://forums.homeseer.com/forum/ho...e-v1-0-release
-
An update has been published for iOS: https://forums.homeseer.com/forum/ho...-beta-v1-1-ios
- Likes 1
Leave a comment:
-
I have several Aeon Labs Aeotec ZW095 Power monitors. The child device “pop ups” do not disappear. They persist even when I switch dashboards.
See attached screen shots.2 Photos
Leave a comment:
-
Originally posted by Steve Q View PostI have successfully manually added 6 security cameras to HS3 and I have added them to this mobile iOS app. When I load the app the camera images are briefly displayed for 1-2 seconds. They then disappear and are replaced by the spinning wheel, never to reappear until I reload the app. This appears to be a refresh problem.
Steve Q
Any ideas on this?
Steve Q
Leave a comment:
-
Originally posted by Haggis View PostThrough the web interface I deleted a virtual device which was displayed in one of the dashboard in the IOS app.
Now the app crashes anytime I try to open the dashboard.
(I am also unable to delete the dashboard in order to recreate it, as I have to open the dashboard first, which again crashes the app)
Deleting a device referenced on a page should simply remove it from the dashboard as well.
Leave a comment:
-
Through the web interface I deleted a virtual device which was displayed in one of the dashboard in the IOS app.
Now the app crashes anytime I try to open the dashboard.
(I am also unable to delete the dashboard in order to recreate it, as I have to open the dashboard first, which again crashes the app)
Deleting a device referenced on a page should simply remove it from the dashboard as well.
Leave a comment:
-
The Events tab only occasionally displays my list of events. The majority of the time it is empty and simply states "There is nothing here. Create an event". I have not been able to figure out when it works and when it doesn't (however if I change the name of an event in HS3, the tab seems to work correctly after). The Devices tab always populates without issues. Am I doing something wrong, or is this a bug?
Leave a comment:
-
Originally posted by AutomatedJim View Post
Rich,
I only have one system. I will try unchecking "Log Remote Logins" and see what happens.
FYI I am not using MyHomeSeer, I am logging in with the IP of the box.
Thanks,
Jim
I turned off "Log Remote Logins". HomeSeer Mobile does not show a connect or disconnect in the logs. HS3 Touch does show both.
I like that HS3 Touch shows up. Can HomeSeer Mobile do the same?
Thanks,
Jim
Leave a comment:
-
Originally posted by rjh View Post"Log Remote Logins" is the other setting that controls this, so disable that one.
It logs that message once and will not log it again for the same system unless some other system connects, so maybe you have multiple systems connecting?
I only have one system. I will try unchecking "Log Remote Logins" and see what happens.
FYI I am not using MyHomeSeer, I am logging in with the IP of the box.
Thanks,
Jim
Leave a comment:
-
Yes, that is how I use it also. At home all my touch screens have custom projects on them (including my smart mirror ). But when I am away I use HomeSeer mobile with custom dashboards. But I never separate child devices from root devices, that just creates a complicated to manage system IMO.
Originally posted by John245 View Post
In my opininion the intefaces (HSTocuh and HSMobile) are complementary.
I;m using an iPad with HDTocuh as full interface when I'm at home.
If I'm away I use an iPhone with HS mobile to get an overview at once of the most importen items. In case I want information of a specific device or I want to control a specific device I use the standard HSTouch project on my phone.
---
John
Leave a comment:
-
Originally posted by rjh View PostThe program has to be far easier to use to extend its reach, but we are not forgetting the more "technical" user so you can have it both ways. If you want a simple app that is easier to use, use HomeSeer Mobile. If you want to go crazy you can do what you do now with the web interface and HSTouch. So we are not "breaking" anything for existing users who like it the way it is. For the more technical, HomeSeer Mobile is probably going to be too simple for you and we are not going to complicate it with settings/features that the vast number of users will never use.
I;m using an iPad with HDTocuh as full interface when I'm at home.
If I'm away I use an iPhone with HS mobile to get an overview at once of the most importen items. In case I want information of a specific device or I want to control a specific device I use the standard HSTouch project on my phone.
---
John
Leave a comment:
-
The program has to be far easier to use to extend its reach, but we are not forgetting the more "technical" user so you can have it both ways. If you want a simple app that is easier to use, use HomeSeer Mobile. If you want to go crazy you can do what you do now with the web interface and HSTouch. So we are not "breaking" anything for existing users who like it the way it is. For the more technical, HomeSeer Mobile is probably going to be too simple for you and we are not going to complicate it with settings/features that the vast number of users will never use.
Originally posted by Krumpy View PostRich, I think that I will take this offline with you as I don't want to clutter up this thread. You're a reasonable man, but I think you guys may want to rethink this. But, then I probably need to get up to speed with the Mobile app as well before going any further on this. Keep in mind that you're a technologist, for this product to keep going down the "professional" versus "DYI - Hobbyist" path, it needs to be simple and uncluttered of a user interface. HSTouch - let's not even go there. It shows the state of the union that one couldn't take HSTouch parts to make this type of interface.
Leave a comment:
-
Rich, I think that I will take this offline with you as I don't want to clutter up this thread. You're a reasonable man, but I think you guys may want to rethink this. But, then I probably need to get up to speed with the Mobile app as well before going any further on this. Keep in mind that you're a technologist, for this product to keep going down the "professional" versus "DYI - Hobbyist" path, it needs to be simple and uncluttered of a user interface. HSTouch - let's not even go there. It shows the state of the union that one couldn't take HSTouch parts to make this type of interface.
Originally posted by rjh View PostIn our new mobile app the devices are single devices that have "sub sections" for the children. So while the children still exist, they are part of one "view". This greatly simplifies the operation of the device. Most users see the devices as ONE device, like a motion sensor and it does not make any sense to separate parts like motion, temp, etc. Now for users who see a need to put children in different rooms, you can still do this in the web interface and HSTouch. So in your case you would not use HomeSeer Mobile as the devices may not appear properly. We are still determining how we want to display these "separated" devices. I understand how some may want to separate them but I bet its rare, I never do it and in all the user configs I have seen, I have not seen it done.
Leave a comment:
-
"Log Remote Logins" is the other setting that controls this, so disable that one.
It logs that message once and will not log it again for the same system unless some other system connects, so maybe you have multiple systems connecting?
Originally posted by AutomatedJim View Post
Rich,
I turned off "log local logins" and still get repeated log entries. I looked for IP throttling in settings and don't see it. Where do you find that setting?
Thanks,
Jim
Leave a comment:
-
In our new mobile app the devices are single devices that have "sub sections" for the children. So while the children still exist, they are part of one "view". This greatly simplifies the operation of the device. Most users see the devices as ONE device, like a motion sensor and it does not make any sense to separate parts like motion, temp, etc. Now for users who see a need to put children in different rooms, you can still do this in the web interface and HSTouch. So in your case you would not use HomeSeer Mobile as the devices may not appear properly. We are still determining how we want to display these "separated" devices. I understand how some may want to separate them but I bet its rare, I never do it and in all the user configs I have seen, I have not seen it done.
Originally posted by Krumpy View Post
This is interesting, and I will admit that I have not read every post in this thread of 9 pages. I strongly disagree with your recommendation to "get away from separating devices". Novice users mainly and only care about the devices controlling the "load". Everything else is noise. If the other devices have necessary use, and if they should or need to reside in the same location, then may I recommend that you add the additional purpose for the other devices into one single HS devices as additional status or feature pages of the device?
Background:
When I add a z-wave dimmer it will create three devices where two of them members of my family could care less about. It is the root, the central scene controller, and the actual device which allows on/off/dim control. One would think that the root device is the actual device which controls the load. But it isn't as it is one of the child devices which controls the load. So, from my perspective my family members and potential other customers would be completely confused about the root and the central scene devices, and would prefer to separate them or place the root and central scene devices somewhere else (like System or something the like).
If this is not supported, or not possible, then we have an issue in my perspective.
Leave a comment:
Leave a comment: