Announcement

Collapse
No announcement yet.

Z-Wave CA8900 device status not correc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Z-Wave CA8900 device status not correc

    Ok going to put this in as a bug status but thought I would post it here to see what others see..

    I have a CA8900 thermostat as seen here http://www.amazon.com/Intermatic-CA8...ef=pd_sxp_f_pt


    I am new to HSTouch and have been enjoying to start to set it up..

    I noticed my Thermostat Temp was always 81 degrees and figured it was something im doing wrong.

    well now I noticed no it isnt HSTouch..

    so first arrow is 81F Thermostat Temp
    2nd arrow is for Thermostat Status - listed as Cooling but my A/C is off
    3rd arrow even shows Thermostat is off
    Attached Files
    HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

    HS - HS3 Pro Edition 3.0.0.435

    Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

    Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

    #2
    Originally posted by TeleFragger View Post
    Ok going to put this in as a bug status but thought I would post it here to see what others see..

    I have a CA8900 thermostat as seen here http://www.amazon.com/Intermatic-CA8...ef=pd_sxp_f_pt


    I am new to HSTouch and have been enjoying to start to set it up..

    I noticed my Thermostat Temp was always 81 degrees and figured it was something im doing wrong.

    well now I noticed no it isnt HSTouch..

    so first arrow is 81F Thermostat Temp
    2nd arrow is for Thermostat Status - listed as Cooling but my A/C is off
    3rd arrow even shows Thermostat is off
    I think what it saying is, 1 arrow, status is in cooling mode, 3rd arrow this that the AC is in idle..
    Hector
    ____________________________________
    Win.2003 OS, HS3
    BLDSC,BLstat,BLRadar,BLRamdom,BLOccupied
    BLups,BLrain8,HSTouch,Ultrajones Weatherbug,
    MyTrigger,ACRF2,W800,Zwave
    AP800,Honeywell Stat

    Comment


      #3
      Originally posted by Rotech View Post
      I think what it saying is, 2 arrow, status is in cooling mode, 3rd arrow this that the AC is in idle..
      yes fixed it for ya though.. and also 1 shows temp that is wrong..
      HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64

      HS - HS3 Pro Edition 3.0.0.435

      Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190

      Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface

      Comment

      Working...
      X