Wanted to make a simple qwiki for those in future that may be running on Pi2...
First download the pre built image that rmasonjr has compiled and graciously hosted for us to use (big ups to him : http://1drv.ms/1DKWYW8
Following rmasonjr's directions:
There are 3 users on this distro, all with the same password: homeseer
The users are root, pi, homeseer
***After booting the image, login as homeseer and:
sudo apt-get install mono-complete
Mono 3.2.8 is installed along with flite (TTS) and chromium.
Once you boot into the Pi you will want to use wget command to download HS3 as outline by PosterBoy (publishing the link for the HS3 linux files is yet to be addressed from what I gather thus far):
wget http://homeseer.com/updates3/hs3_linux_3_0_0_149.tar.gz
tar xvf hs3_linux_3_0_0_149.tar.gz
rm hs3_linux_3_0_0_149.tar.gz
cd HomeSeer
wget http://homeseer.com/updates3/hslinux...0_0_174.tar.gz
tar zxvf ~/hslinux_hs3_3_0_0_174.tar.gz
rm hslinux_hs3_3_0_0_174.tar.gz
cd ..
sudo mv HomeSeer /usr/local
Once your in the Homeseer directory ./go will start the service. From there you if you log into the pi2 ip address on an http browser (port 80) it will take you to the homeseer webserver....
If you are using a USB port on the PI2, you will need to make a symlink for HS3 plugins using this or a similar command with your own port with the directions in this link, section 4.3.1:
https://www.winehq.org/docs/wineusr-...s-to-configure
More to come with regard to setting up wifi, purging the ifplugd file etc...
First download the pre built image that rmasonjr has compiled and graciously hosted for us to use (big ups to him : http://1drv.ms/1DKWYW8
Following rmasonjr's directions:
There are 3 users on this distro, all with the same password: homeseer
The users are root, pi, homeseer
***After booting the image, login as homeseer and:
sudo apt-get install mono-complete
Mono 3.2.8 is installed along with flite (TTS) and chromium.
Once you boot into the Pi you will want to use wget command to download HS3 as outline by PosterBoy (publishing the link for the HS3 linux files is yet to be addressed from what I gather thus far):
wget http://homeseer.com/updates3/hs3_linux_3_0_0_149.tar.gz
tar xvf hs3_linux_3_0_0_149.tar.gz
rm hs3_linux_3_0_0_149.tar.gz
cd HomeSeer
wget http://homeseer.com/updates3/hslinux...0_0_174.tar.gz
tar zxvf ~/hslinux_hs3_3_0_0_174.tar.gz
rm hslinux_hs3_3_0_0_174.tar.gz
cd ..
sudo mv HomeSeer /usr/local
Once your in the Homeseer directory ./go will start the service. From there you if you log into the pi2 ip address on an http browser (port 80) it will take you to the homeseer webserver....
If you are using a USB port on the PI2, you will need to make a symlink for HS3 plugins using this or a similar command with your own port with the directions in this link, section 4.3.1:
https://www.winehq.org/docs/wineusr-...s-to-configure
More to come with regard to setting up wifi, purging the ifplugd file etc...
Comment