When including devices the process never completes to activate the "close" button. It says done in the process but never gives the close option. The page has to be refreshed or go out and back. On a refresh when selecting add/include the start option again isn't displayed and I have to click another option first.
-
-
Including a Thermostat again and it just dumped this.
Code:Jan-25 22:33:59 Warning Webserver accept callback: An existing connection was forcibly closed by the remote host Jan-25 22:30:13 Z-Wave 4 out of 4 Child devices of node 7 were created successfully. Jan-25 22:30:12 Z-Wave Getting association information for Node 7 Z-Wave Thermostat Jan-25 22:30:12 Z-Wave Error Node Change Event for Node 7 on Network D5A6061B, CC=COMMAND_CLASS_SENSOR_MULTILEVEL_V8 but no valid devices were found. (31-05-01-2A-02-E4-0F) Jan-25 22:30:12 Z-Wave Error Node Change Event for Node 7 on Network D5A6061B, CC=COMMAND_CLASS_SENSOR_MULTILEVEL_V8 but no valid devices were found. (31-05-01-2A-02-E4-0F) Jan-25 22:30:12 Z-Wave Error Node Change Event for Node 7 on Network D5A6061B, CC=COMMAND_CLASS_THERMOSTAT_OPERATING_STATE_V2 but no valid devices were found. (42-03-00-B7) Jan-25 22:30:12 Z-Wave Error Node Change Event for Node 7 on Network D5A6061B, CC=COMMAND_CLASS_THERMOSTAT_OPERATING_STATE_V2 but no valid devices were found. (42-03-00-B7) Jan-25 22:30:12 Z-Wave Error Node Change Event for Node 7 on Network D5A6061B, CC=COMMAND_CLASS_THERMOSTAT_OPERATING_STATE_V2 but no valid devices were found. (42-03-00-B7) Jan-25 22:30:12 Z-Wave Error Node Change Event for Node 7 on Network D5A6061B, CC=COMMAND_CLASS_THERMOSTAT_SETPOINT but no valid devices were found. (43-03-01-2A-02-A8-37) Jan-25 22:30:12 Z-Wave Assigning return route from node 1 to Node 7 Z-Wave Thermostat Jan-25 22:30:11 Z-Wave Error Node Change Event for Node 7 on Network D5A6061B, CC=COMMAND_CLASS_THERMOSTAT_MODE_V3 but no valid devices were found. (40-03-01-B4) Jan-25 22:30:11 Z-Wave Device: Node 7 Z-Wave Thermostat Set to ON Jan-25 22:30:11 Z-Wave SmartStick+: Adding association for Z-Wave device Node 7 Z-Wave Thermostat (Node 7, Group 1) to HomeSeer Jan-25 22:30:11 Z-Wave Root Node Device Node 7 Z-Wave Thermostat was created for node 7 on network D5A6061B Jan-25 22:30:11 Z-Wave All associations for node 7 have been retrieved successfully, it supports associations on these groups: 1. Jan-25 22:30:11 Z-Wave Node 7 Association Group 1 can have 1 associations, and currently has 0 Jan-25 22:30:11 Z-Wave Getting association information for node 7 Jan-25 22:30:11 Z-Wave Node 7 Supports Thermostat Setpoint CC and supports these setpoints: Heating 1 Jan-25 22:30:11 Z-Wave Node 7 Supports Thermostat Mode CC and supports these modes: Heat, Energy Save Heat Jan-25 22:30:10 Z-Wave Node 7 is a Z-Wave Plus node. Retrieving ZWPlus Info... Jan-25 22:30:10 Z-Wave Node 7 is Z-Wave version: Lib: 4.05 App: 1.0
-
all my z wave devices are messed up. was not able to contact any nodes..I moved to .55 And done a full scan an got this :
Code:Loading network information from your Z-Wave interface... Done. Synchronizing network information against HomeSeer devices... Getting Z-Wave node list for network F3FC9E42... Found 14 Z-Wave nodes Syncing Z-Wave nodes with device list... Synchronize nodes finished. Number of device nodes to be created/added = 0 Adding using S0 Security, Negotiating or Verifying SECURITY SCHEME for node 18 [COLOR=#D58000]Warning: Failed to get a SECURITY SCHEME or verify the key from node 18. Device may not be added properly to HomeSeer.[/COLOR] [COLOR=#D58000]Warning: If this is an import, you may need to remove and add the device as some devices cannot be added with an import.[/COLOR] Adding using S0 Security, Negotiating or Verifying SECURITY SCHEME for node 43 [COLOR=#D58000]Warning: Failed to get a SECURITY SCHEME or verify the key from node 43. Device may not be added properly to HomeSeer.[/COLOR] [COLOR=#D58000]Warning: If this is an import, you may need to remove and add the device as some devices cannot be added with an import.[/COLOR] Node: 17 Supports Class(es): ZWAVEPLUS_INFO, NOTIFICATION_V4, SENSOR_MULTILEVEL_V7, SWITCH_COLOR_V2, MANUFACTURER_SPECIFIC, VERSION, ASSOCIATION_GRP_INFO, ASSOCIATION, CONFIGURATION_V3, NODE_NAMING, DEVICE_RESET_LOCALLY, FIRMWARE_UPDATE_MD_V3, POWERLEVEL Node: 17 Controls Class(es): MARK, BASIC Node 17 is Z-Wave version: Lib: 4.54 App: 1.10 Node 17 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 18 Supports Class(es): ZWAVEPLUS_INFO, SWITCH_BINARY_V2, SWITCH_MULTILEVEL_V4, SWITCH_COLOR_V2, CONFIGURATION_V3, SWITCH_ALL, METER, CLOCK, ASSOCIATION, ASSOCIATION_GRP_INFO, MANUFACTURER_SPECIFIC, VERSION, FIRMWARE_UPDATE_MD_V3, POWERLEVEL, SECURITY Node: 18 Controls Class(es): MARK, DEVICE_RESET_LOCALLY, HAIL Node 18 is Z-Wave version: Lib: 4.05 App: 1.3 Node 18 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 23 Supports Class(es): ZWAVEPLUS_INFO, SWITCH_BINARY_V2, SWITCH_MULTILEVEL_V4, SWITCH_COLOR_V2, CONFIGURATION_V3, SWITCH_ALL, METER, CLOCK, ASSOCIATION, ASSOCIATION_GRP_INFO, MANUFACTURER_SPECIFIC, VERSION, FIRMWARE_UPDATE_MD_V3, POWERLEVEL Node: 23 Controls Class(es): MARK, DEVICE_RESET_LOCALLY, HAIL Node 23 is Z-Wave version: Lib: 4.05 App: 1.3 Node 23 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 26 Supports Class(es): ZWAVEPLUS_INFO, CRC_16_ENCAP, VERSION, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, ASSOCIATION, ASSOCIATION_GRP_INFO, POWERLEVEL, SWITCH_BINARY_V2, SWITCH_ALL, CONFIGURATION_V3, SCENE_ACTUATOR_CONF, SCENE_ACTIVATION, FIRMWARE_UPDATE_MD_V3 Node 26 is Z-Wave version: Lib: 4.38 App: 5.23 Node 26 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 31 Supports Class(es): ZWAVEPLUS_INFO, ASSOCIATION, ASSOCIATION_GRP_INFO, TRANSPORT_SERVICE_V2, VERSION, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, POWERLEVEL, BATTERY, NOTIFICATION_V4, SENSOR_BINARY_V2, WAKE_UP, CONFIGURATION_V3, SUPERVISION, FIRMWARE_UPDATE_MD_V3 Node 31 is Z-Wave version: Lib: 4.61 App: 1.1 Node 31 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 33 Supports Class(es): ZWAVEPLUS_INFO, ASSOCIATION, ASSOCIATION_GRP_INFO, TRANSPORT_SERVICE_V2, VERSION, MANUFACTURER_SPECIFIC, DEVICE_RESET_LOCALLY, POWERLEVEL, BATTERY, NOTIFICATION_V4, SENSOR_BINARY_V2, WAKE_UP, CONFIGURATION_V3, SUPERVISION, FIRMWARE_UPDATE_MD_V3 Node 33 is Z-Wave version: Lib: 4.61 App: 1.1 Node 33 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 35 Supports Class(es): ZWAVEPLUS_INFO, VERSION, MANUFACTURER_SPECIFIC, ASSOCIATION_GRP_INFO, ASSOCIATION, POWERLEVEL, NOTIFICATION_V4, WAKE_UP, BATTERY, SENSOR_BINARY_V2, SENSOR_MULTILEVEL_V7, CONFIGURATION_V3, FIRMWARE_UPDATE_MD_V3, DEVICE_RESET_LOCALLY Node 35 is Z-Wave version: Lib: 4.54 App: 1.10 Node 35 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 36 Supports Class(es): ZWAVEPLUS_INFO, SWITCH_MULTILEVEL_V4, SWITCH_COLOR_V2, CONFIGURATION_V3, ASSOCIATION, ASSOCIATION_GRP_INFO, MANUFACTURER_SPECIFIC, VERSION, FIRMWARE_UPDATE_MD_V3, POWERLEVEL, DEVICE_RESET_LOCALLY Node 36 is Z-Wave version: Lib: 4.54 App: 1.5 Node 36 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 37 Supports Class(es): ZWAVEPLUS_INFO, SWITCH_MULTILEVEL_V4, SWITCH_COLOR_V2, CONFIGURATION_V3, ASSOCIATION, ASSOCIATION_GRP_INFO, MANUFACTURER_SPECIFIC, VERSION, FIRMWARE_UPDATE_MD_V3, POWERLEVEL, SECURITY, DEVICE_RESET_LOCALLY Node: 37 Supports Secure Class(es): VERSION, MANUFACTURER_SPECIFIC, SWITCH_MULTILEVEL_V4, SWITCH_COLOR_V2, CONFIGURATION_V3, ASSOCIATION, ASSOCIATION_GRP_INFO, FIRMWARE_UPDATE_MD_V3, POWERLEVEL Node 37 is Z-Wave version: Lib: 4.54 App: 1.5 Node 37 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 38 Supports Class(es): ZWAVEPLUS_INFO, SWITCH_MULTILEVEL_V4, SWITCH_COLOR_V2, CONFIGURATION_V3, ASSOCIATION, ASSOCIATION_GRP_INFO, MANUFACTURER_SPECIFIC, VERSION, FIRMWARE_UPDATE_MD_V3, POWERLEVEL, SECURITY, DEVICE_RESET_LOCALLY Node: 38 Supports Secure Class(es): VERSION, MANUFACTURER_SPECIFIC, SWITCH_MULTILEVEL_V4, SWITCH_COLOR_V2, CONFIGURATION_V3, ASSOCIATION, ASSOCIATION_GRP_INFO, FIRMWARE_UPDATE_MD_V3, POWERLEVEL Node 38 is Z-Wave version: Lib: 4.54 App: 1.5 Node 38 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 42 Supports Class(es): ZWAVEPLUS_INFO, SWITCH_MULTILEVEL_V4, SWITCH_COLOR_V2, SWITCH_ALL, SCENE_ACTUATOR_CONF, SCENE_ACTIVATION, CONFIGURATION_V3, ASSOCIATION_GRP_INFO, ASSOCIATION, MANUFACTURER_SPECIFIC, VERSION, FIRMWARE_UPDATE_MD_V3, POWERLEVEL, DEVICE_RESET_LOCALLY Node: 42 Controls Class(es): HAIL Node 42 is Z-Wave version: Lib: 4.05 App: 1.5 Node 42 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 43 Supports Class(es): ZWAVEPLUS_INFO, VERSION, MANUFACTURER_SPECIFIC, SECURITY Node 43 is a Z-Wave Plus node. Retrieving ZWPlus Info... Node: 45 Supports Class(es): ZWAVEPLUS_INFO, SENSOR_BINARY_V2, BATTERY, WAKE_UP, CONFIGURATION_V3, ASSOCIATION, ASSOCIATION_GRP_INFO, NOTIFICATION_V4, VERSION, MANUFACTURER_SPECIFIC, POWERLEVEL, FIRMWARE_UPDATE_MD_V3, SECURITY, DEVICE_RESET_LOCALLY Node: 45 Supports Secure Class(es): ZWAVEPLUS_INFO, SECURITY, SENSOR_BINARY_V2, BATTERY, WAKE_UP, CONFIGURATION_V3, ASSOCIATION, ASSOCIATION_GRP_INFO, NOTIFICATION_V4, MANUFACTURER_SPECIFIC, VERSION, FIRMWARE_UPDATE_MD_V3, POWERLEVEL, DEVICE_RESET_LOCALLY Node 45 is Z-Wave version: Lib: 4.05 App: 1.2 Node 45 is a Z-Wave Plus node. Retrieving ZWPlus Info... [COLOR=#D58000]Warning: Node 17 did not respond to the Notification Supported request.[/COLOR] [COLOR=#FF0000]Error: Exception creating Sensor Multilevel child device of node 17, GET for supported sensor types indicated failure.[/COLOR] [COLOR=#FF0000]Error: Node 31 did not provide Wake-Up Command Class information - it will not be processed further.[/COLOR] [COLOR=#FF0000]Error: Node 33 did not provide Wake-Up Command Class information - it will not be processed further.[/COLOR] [COLOR=#FF0000]Error: Node 35 did not provide Wake-Up Command Class information - it will not be processed further.[/COLOR] [COLOR=#FF0000]Error: Node 45 did not provide Wake-Up Command Class information - it will not be processed further.[/COLOR] Enabling instant status for Z-Wave device Z-Wave Z-Wave HomeSeer Tech Notification Sensor (17) Instant status for Z-Wave device Z-Wave Z-Wave HomeSeer Tech Notification Sensor (17) failed. The command will be queued and sent when it next wakes up. 4 out of 4 Child devices of node 17 were created successfully. Associating Aeon Labs device Z-Wave Chambre Aeon Labs Switch Binary (18) to HomeSeer [COLOR=#D58000]Warning: FAILED to configure Aeon Labs device Z-Wave Chambre Aeon Labs Switch Binary (18) to send instant status changes to HomeSeer - Check the log for more details.[/COLOR] Configuring Aeon Labs device Z-Wave Chambre Aeon Labs Switch Binary (18) to report Meter and Sensor data in Groups 1-3 to HomeSeer. [COLOR=#D58000]Warning: FAILED to configure Aeon Labs device Z-Wave Chambre Aeon Labs Switch Binary (18) to report Meter and Sensor data (101) in Group 1 - Check the log for more details.[/COLOR] 10 out of 10 Child devices of node 18 were created successfully. Associating Aeon Labs device Z-Wave Salon Aeon Labs Switch Binary (23) to HomeSeer [COLOR=#D58000]Warning: FAILED to configure Aeon Labs device Z-Wave Salon Aeon Labs Switch Binary (23) to send instant status changes to HomeSeer - Check the log for more details.[/COLOR] Configuring Aeon Labs device Z-Wave Salon Aeon Labs Switch Binary (23) to report Meter and Sensor data in Groups 1-3 to HomeSeer. [COLOR=#D58000]Warning: FAILED to configure Aeon Labs device Z-Wave Salon Aeon Labs Switch Binary (23) to report Meter and Sensor data (101) in Group 1 - Check the log for more details.[/COLOR] 10 out of 10 Child devices of node 23 were created successfully. 1 out of 1 Child devices of node 31 were created successfully. 1 out of 1 Child devices of node 33 were created successfully. 7 out of 7 Child devices of node 35 were created successfully. 5 out of 5 Child devices of node 36 were created successfully. 5 out of 5 Child devices of node 37 were created successfully. 5 out of 5 Child devices of node 38 were created successfully. 7 out of 7 Child devices of node 42 were created successfully. 3 out of 3 Child devices of node 45 were created successfully. Finished with Z-Wave device synchronization.
Will chek this tomorow..
What should i do ??
rjhAttached FilesComment
-
-
Now getting this error when adding/excluding a device:
Error - Your target Z-Wave interface did not fully initialize or is not functioning properly.
I have to restart the z-wave plugin to re-init the interface.Comment
-
Since I do not have a huge z wave setup. I I did factory reset all the nodes and the z wave stick ( and deleted all the z-wave data in the data folder). Then, I installed again all the nodes.
If all my wireless devices were z wave.. i would have cried I think....Comment
-
Getting errors like this for various devices. This was from a Fibaro Motion Sensor that I've added back to the system.
Node Change Event for Node 35 on Network D5A6061B, CC=COMMAND_CLASS_SENSOR_MULTILEVEL_V8 but no valid devices were found. (31-05-01-22-00-D0-15) Comment
-
HS3 Prod - Win10 - DSC - HVAC-GC-TBZ48 x3 - CurrentCost - BLRadar - RFXCOM/FRXTRX433 -ADIO - HSTOUCH - BLUPS - AB8SS - SONOS - Alexa - 1 wire - BlueIris -MyQComment
-
I'm holding off on 495 till this is worked out.HomeSeer Version: HS3 Standard Edition 3.0.0.548
Linux version: Linux auto 4.15.0-72-generic #81-Ubuntu SMP Tue Nov 26 12:20:02 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Number of Devices: 484 | Number of Events: 776
Enabled Plug-Ins: 3.0.0.13: AirplaySpeak | 2.0.61.0: BLBackup
3.0.0.70: EasyTrigger | 1.3.7006.42100: LiftMaster MyQ
4.2.3.0: mcsMQTT | 3.0.0.53: PHLocation2 | 0.0.0.47: Pushover 3P
3.0.0.16: RaspberryIO | 3.0.1.262: Z-Wave
Z-Net version: 1.0.23 for Inclusion Nodes
SmartStick+: 6.04 (ZDK 6.81.3) on ServerComment
-
I see that .256 is out. Has anyone tried it?Comment
-
I think it's more an issue with the z-wave plugin than HS itself. I've been running .495 since the day it came out and have not had any issues, but am still on z-wave .249.Originally posted by Timon View PostHS 4.2.8.0: 2134 Devices 1252 Events
Z-Wave 3.0.10.0: 133 Nodes on one Z-NetComment
-
Running it..... so far no major issues. I've had a few odd errrors from devices that seemed to go aware after an exclude/include a second time.Originally posted by joegr View PostComment
-
So .... I would like to play with homeseer mobile. From reading the previous threads, it looks like I can upgrade HS Pro to v,495 and keep the zwave plugin at v.249 and have a pretty good chance that there will be no problems.
Comment
-
I've been running 495 with 249 since they came out and I have had no problemsComment
-
Running 495 with a new zwave network (did reset it on .255). on .256 .
no probs at allComment
-
It have been some time since I have done an update. Does the install of the new HS automatically install the new z-wave plugin? My preference, of course since in am already running zwave plugin v.249, it to have HS install and leave the zwave plugin alone.Comment
Comment