Announcement

Collapse
No announcement yet.

GE switch indicator light change.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • nssauls
    replied
    SteveW thanks for the additional information.

    Leave a comment:


  • SteveW
    replied
    Here's a tip: all certified Z-Wave products are listed at zwavealliance.org. This is handy if you don't have the user's guide.

    For example, a search for Jasco (which makes the GE switches): https://products.z-wavealliance.org/...rchText=Jasco+ will find their products,

    Here's the configuration parameters for a GE wall switch (note that there are several different generations of these, some branded GE, others branded Jasco or Honeywell, etc. Search by product number if you can.)

    https://products.z-wavealliance.org/...dFrequencyId=2
    https://products.z-wavealliance.org/...s/2501/configs

    Leave a comment:


  • nssauls
    replied
    Go to Device Manager, select the switch you want to change, then Z-Wave, Settings and change the value of Parameter 3 to 1.

    LED Light
    When shipped from the factory, the LED is set to turn ON when the connected light is turned OFF. This is the default setting and can be changed if your primary controller supports the node configuration function. To make the LED turn ON when the light is turned ON, change parameter 3’s value to “1”. To turn the LED OFF at all times, change parameter 3’s value to 2.
    • Parameter No: 3
    • Length: 1 Byte
    • Valid Values = 0, 1 or 2 (default 0)

    Thanks a bunch Archcantor! This worked perfectly.

    Leave a comment:


  • nssauls
    replied
    Thanks!

    Leave a comment:


  • Archcantor
    replied
    Go to Device Manager, select the switch you want to change, then Z-Wave, Settings and change the value of Parameter 3 to 1.

    LED Light
    When shipped from the factory, the LED is set to turn ON when the connected light is turned OFF. This is the default setting and can be changed if your primary controller supports the node configuration function. To make the LED turn ON when the light is turned ON, change parameter 3’s value to “1”. To turn the LED OFF at all times, change parameter 3’s value to 2.
    • Parameter No: 3
    • Length: 1 Byte
    • Valid Values = 0, 1 or 2 (default 0)

    Leave a comment:


  • nssauls
    started a topic GE switch indicator light change.

    GE switch indicator light change.

    New user here, coming over from SmartThings. Have multiple GE switches with the indicator light and I prefer to have the light lit when the switch is on. I don’t see a place to make that change in the software. What am I missing?
Working...
X