Announcement

Collapse
No announcement yet.

Devices will not show up in device list in Device Management

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ch.krause
    replied
    Thanks for your hint. I did exactly what you wrote, but the device did not show up.
    Even tried to "Erase Interface" first, than included the plug -> not showing up
    Closed the App. Reopend the App. Hit "Enable". The log shows:
    Initialization Done.
    Getting manufacturer information for existing devices...
    Getting Z-Wave node list for network F96D47A5...
    Found 2 Z-Wave nodes
    Syncing Z-Wave nodes with device list...
    Device synchronization needs to get Z-Wave class information for one node.
    Getting class information for node 1...
    Getting class information for node 2...
    Manufacturer information for node 2, ID: 96=60H (Everspring), Type: 4=4H, ID: 1=1H
    Node 2 is Z-Wave version: Lib: 2,64 App: 1.2
    Device sync complete.
    Init Done.

    But nothing in the "Devices" list.

    Leave a comment:


  • Shallowearth
    replied
    The UI is buggy from what I have seen. If the devices don't show up. Close the app (don't press anything just close it), re-open the app, hit the enable button and your devices should appear.

    Leave a comment:


  • Devices will not show up in device list in Device Management

    Starting situation:

    Z-Flash is open and interface is enabled. No devices are connect and Interface is erased before.

    Click image for larger version

Name:	Annotation1.png
Views:	215
Size:	27.9 KB
ID:	1319785

    I set up an new folder with firmware files in "C:\Program Files (x86)\HomeSeer\HomeSeer Z-Flash\updates" named "96_1_4"

    Click image for larger version

Name:	Annotation2.png
Views:	146
Size:	27.3 KB
ID:	1319786

    It holds one file

    Click image for larger version

Name:	Annotation3.png
Views:	147
Size:	7.3 KB
ID:	1319787
    When I now add the device I get this in the log:
    Add Node started...
    Activate the 'Add to Network' function on the device...
    A new node is being added...
    A new node is being added...
    A new node is being added...
    A new node is being added...
    Adding a new DEVICE NODE...
    Adding a new DEVICE NODE...
    Adding a new DEVICE NODE...
    Adding a new DEVICE NODE...
    Adding a new DEVICE NODE...
    Adding a new DEVICE NODE...
    DONE - Add Node Operation is Complete.
    Done. Node 2 Added.
    Manufacturer information for node 2, ID: 96=60H (Everspring), Type: 4=4H, ID: 1=1H
    Node 2 is Z-Wave version: Lib: 2,64 App: 1.2
    Device sync complete.


    The device list in Device Managements remain empty:

    Click image for larger version

Name:	Annotation4.png
Views:	144
Size:	26.1 KB
ID:	1319789

    Same happens when doing it as second controller via another gateway (homee). The nodes are identified during adding but none apears in the device list.

    What am I doing wrong?

    Attached Files
Working...
X