Disconnected

[MaxFox]

Hi,

I don't know if this is a case, but after installing the HS4 4.1.14.0 release the plug_in became unstable. Arduino no longer connects. I tried to change the IP address in both the Plug-In and the Skecth but nothing. Yet it is properly plugged into my LAN and I can always reach it with Ping. I haven't changed anything in the configuration.
If I close and reopen HS4 seems to be connected for 2-3 minutes and then disconnects.
If it stays connected and I unlink it via Plug_in, it won't connect again.
Has this happened to anyone else ?
I am using version 4.0.2.7


Thank you


Thank you

[enigmatheatre]

Have you checked your firewall and AV?

[MaxFox]

Have you checked your firewall and AV?

Hi
of course I checked and to avoid problems I deactivated everything but still nothing.

This is the startup Log:
02/03/2021 22:41:32 HomeSeer ~! ~ Starting Plug-In ~! ~ Initializing plugin Arduino ...
02/03/2021 22:41:32 Arduino-4 ~! ~ Info ~! ~~~~~~~~~~~~~~~~~~ Startup Routine Started ~~~~~~~~~~ ~~~~~~~~~~
02/03/2021 22:41:32 Arduino-4 ~! ~ Info ~! ~ Finding Plugin devices. Please Wait ...........
02/03/2021 22:41:32 Arduino-4 ~! ~ Info ~! ~ 1 Boards found.
02/03/2021 22:41:32 Arduino-4 ~! ~ Info ~! ~ 0 Input Pins Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ 0 Output Pins Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ 0 Analog Pins Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ 0 PWM Pins Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ 0 Servo Pins Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ 0 RGB Devices Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ 0 Rom Devices Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ 2 API Input Devices Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ 5 API Output Devices Found.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ Auto Connecting Board No: 1
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~~~~~~~~~~~~~~~~~~ Startup Routine Complete ~~~~~~~~~~ ~~~~~~~~~~
02/03/2021 22:41:33 Arduino-4 ~! ~ Error ~! ~ Error = PEDGet Name = Baud, The specified key was not present in the dictionary.
02/03/2021 22:41:33 HomeSeer ~! ~ Starting Plug-In ~! ~ Plugin Arduino started successfully in 408 milliseconds
02/03/2021 22:41:33 Arduino-4 ~! ~ Error ~! ~ Error = PEDGet Name = AdvancedCom, The specified key was not present in the dictionary.
02/03/2021 22:41:33 Arduino-4 ~! ~ Error ~! ~ Error = PEDGet Name = LinuxPort, The specified key was not present in the dictionary.
02/03/2021 22:41:33 Arduino-4 ~! ~ Info ~! ~ Connecting Board No: 1 at ip address 192.168.1.85 Port No: 8900
02/03/2021 22:41:33 HomeSeer ~! ~ Starting Plug-In ~! ~ Arduino loaded in 1011 milliseconds
02/03/2021 22:41:33 HomeSeer ~! ~ Plug-In ~! ~ Finished initializing plug-in Arduino

[MaxFox]

.If it helps you, I also have this message
Via Ping arduino can be reached

[enigmatheatre]

If you can not ping the boards then I can not see this being a plugin problem and I would think this is something on your network or a hardware problem with the board.