Status device Shelly 2.5

[antoon]

For me it would be most ideal if I have about the same as my Z-wave device.
That means 1 device with the buttons Start Opening, Start Closing and stopped, Icon is not that important (like the Roller Device)
And 1 status device with open and closed and associated Icon.
I assume that I can make 25%, 50% and 75% in HSTouch myself.

[antoon]

antoon try ver 4.0.0.59 - hopefully it should work.

Also I hide/unhide unused Relay / Roller devices (depending on Mode), please verify (you might need to refresh the page)

Today I added a new Roller device, but the Unused relay device is still there

[alexbk66]

For me it would be most ideal if I have about the same as my Z-wave device.
That means 1 device with the buttons Start Opening, Start Closing and stopped, Icon is not that important (like the Roller Device)
And 1 status device with open and closed and associated Icon.
I assume that I can make 25%, 50% and 75% in HSTouch myself.

I can add 25%, 50% and 75% buttons, not a problem.
Can you please post a screenshot of your ideal device.

[antoon]

This is how my Z-wave devices are looking.
This is working fine for me.
If you need more info let me know.

[alexbk66]

If you want, you can send me the images (for 0, 25, etc.) and I can add them to the devices

[alexbk66]

Do you actually want 25, 50, 75 controls, or just status?

[antoon]

Status is just fine.
Icons send PM

[alexbk66]

Ver 4.0.0.61 I added the icons and improved RollerPos device. It's more complicated than Fibaro device because open/close states and commands are different to the position state and commands.

Since I can't test - please test thoroughly.

But now I can't see the value of having two devices? If we just add the "Stop" button to the RollerPos, then we don't need Roller device?

[antoon]

Everything works perfectly.
Only if I set it to 50%, the roller shutter is almost closed.
But I think that's a Shelly problem, because the App also says 50%, even though I calibrated the shutter

And indeed if you add the stop button to the RollerPos, we don't need the Roller device.

ps I still see the relay outputs

[alexbk66]

ps I still see the relay outputs

Can you check status of "Hide From All Views" for the relay devices, they should be hidden

[antoon]

Setting seems to be good, nevertheless I see the device.

[antoon]

My mistake, I overlooked this one

[alexbk66]

My mistake, I overlooked this one

Me too

[alexbk66]

antoon , Ver 4.0.0.62 - Roller: Moved "Stop" button to ChildDeviceRollerPos

I removed the first ChildDeviceRoller device, see if it's sufficient to have one device.

[antoon]

Hi Alex,

I will upgraden and test.
Let you know.
Thanks

Verstuurd vanaf mijn SM-N975F met Tapatalk