Announcement
Collapse
No announcement yet.
Status device Shelly 2.5
Collapse
X
-
Hi
Everything is working again after this update 4.0.0.65.
Thanks for the good and fast service.
-Mats
- Likes 1
Leave a comment:
-
Originally posted by Mats View PostBut it still not possible to get the settings, and this is the same for all my shelly device shelly 1, Shelly 2,5, shelly dimmer 2 and shelly h&t.
I get errors according to the attached hs-log when I try to reach the setting page.
Hard to tell what's wrong, so I added more error logging, hopefully will point the problem
Leave a comment:
-
Hi
After updating to beta 4.0.0.64, there are no errors in my log. So that problem is solved.
But it still not possible to get the settings, and this is the same for all my shelly device shelly 1, Shelly 2,5, shelly dimmer 2 and shelly h&t.
I get errors according to the attached hs-log when I try to reach the setting page.
I enable "Developer Mode" but can not see any errors in the console.
/MatsAttached Files
Leave a comment:
-
Originally posted by Mats View PostHi
You have right 🙂 After I upgrade the plugin and restart the feature was re-created.
But after the update to beta 4.0.0.63 my Shelly 2.5 still fills my log with the following error message about the feature for roller.
I use shelly 2,5 as relay not for roller.
Code:[1561] BR-11 Badrum 2vån: HandleDeviceStatus(F4CFA2E0AD96.RollerPos): System.NullReferenceException: Objektreferensen har inte angetts till en instans av ett objekt. vid HSPI_AKShelly.ChildDeviceRoller.UpdateStatus(RollerStatus roller) vid HSPI_AKShelly.DeviceShellySwitch25.HandleDeviceStatus(Device ShellyBase child, String& why) vid HSPI_AKShelly.DeviceShellyRoot.UpdateChildren()
-Mats
HS4 Pro 4.2.5.0 Windows 10
AK Shelly 4.0.0.61
Leave a comment:
-
Originally posted by Mats View PostToday I also discovered that I get error when I try to check the specific settings for a shelly device see attached image.
Anything in the Log?
Also you can enable "Developer Mode" in Setup => General (under Other Settings) and restart the plugin - then it will start with console window where you might see any errors
I can get to the settings:
Leave a comment:
-
Hi
Today I also discovered that I get error when I try to check the specific settings for a shelly device see attached image.
-Mats
Leave a comment:
-
Originally posted by Mats View PostHi
You have right 🙂 After I upgrade the plugin and restart the feature was re-created.
But after the update to beta 4.0.0.63 my Shelly 2.5 still fills my log with the following error message about the feature for roller. I use shelly 2,5 as relay not for roller.
Code:[1561] BR-11 Badrum 2vån: HandleDeviceStatus(F4CFA2E0AD96.RollerPos): System.NullReferenceException: Objektreferensen har inte angetts till en instans av ett objekt. vid HSPI_AKShelly.ChildDeviceRoller.UpdateStatus(RollerStatus roller) vid HSPI_AKShelly.DeviceShellySwitch25.HandleDeviceStatus(Device ShellyBase child, String& why) vid HSPI_AKShelly.DeviceShellyRoot.UpdateChildren()
-Mats
HS4 Pro 4.2.5.0 Windows 10
AK Shelly 4.0.0.61
Leave a comment:
-
On .63 now,everything working.
So far so good👍
Verstuurd vanaf mijn SM-N975F met Tapatalk
Leave a comment:
-
Hi
You have right 🙂 After I upgrade the plugin and restart the feature was re-created.
But after the update to beta 4.0.0.63 my Shelly 2.5 still fills my log with the following error message about the feature for roller.
I use shelly 2,5 as relay not for roller.
Code:[1561] BR-11 Badrum 2vån: HandleDeviceStatus(F4CFA2E0AD96.RollerPos): System.NullReferenceException: Objektreferensen har inte angetts till en instans av ett objekt. vid HSPI_AKShelly.ChildDeviceRoller.UpdateStatus(RollerStatus roller) vid HSPI_AKShelly.DeviceShellySwitch25.HandleDeviceStatus(Device ShellyBase child, String& why) vid HSPI_AKShelly.DeviceShellyRoot.UpdateChildren()
-Mats
HS4 Pro 4.2.5.0 Windows 10
AK Shelly 4.0.0.61
Leave a comment:
-
Hi
Regarding the thread Error After Update 4.0.0.61 - HomeSeer Message Board These errors in the log have also appeared for us who use shelly 2.5 for relay and not for roller
I solved by deleting feutures for roller.
-Mats
HS4 Pro 4.2.5.0 Windows 10
AK Shelly 4.0.0.61
Leave a comment:
-
I published ver 4.0.0.63 (BETA), not sure if updater works though...
I put back the Roller device - it's better for now, until I have access to my device for testing.
Leave a comment:
Leave a comment: