Announcement

Collapse
No announcement yet.

Setting up Insteon Smoke Bridge to HS4 via MNS Insteon Bridge

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mnsandler
    replied
    Thanks for testing and reporting back.

    Leave a comment:


  • Kwinsteon
    replied
    Look like it’s working now! Did a couple defector tests (around 2:07pm!) and watched the status updates change on HS4 browser. Attached is the error log (I think this is the same as the detailed logging you mentioned). Thanks again for your help.
    Attached Files

    Leave a comment:


  • mnsandler
    replied
    the smoke bridge only reports status. enable detailed logging in the plugin, and check for insteon messages as you test

    Leave a comment:


  • Kwinsteon
    replied
    Just installed the beta version and reinstalled the smoke bridge and it now shows the status:graphics in the plug-in but I’m not seeing anything in HS4 other than the smoke bridge device. I’ll look at it some more later and test the alarm to see what happens. Thanks for your help and I’ll let you know what I find out.

    Leave a comment:


  • mnsandler
    replied
    i posted 4.0.4.2 BETA for you to test. please delete the device from the plugin and add again to get the latest setup.

    https://forums.homeseer.com/forum/hs...n-beta-4-0-4-2

    Leave a comment:


  • mnsandler
    replied
    adding the following status values/graphics; there are no controls. this should get you some status

    Click image for larger version

Name:	smoke bridge.png
Views:	21
Size:	40.9 KB
ID:	1559131

    Leave a comment:


  • Kwinsteon
    replied
    Thanks! Wasn’t trying to create more work! Probably not many folks use a smoke bridge.

    Leave a comment:


  • mnsandler
    replied
    I took a look at the code. I need to update the device feature definition of the smoke bridge to include the various statuses. however hs4 isn't cooperating. I have an email into HST on this

    Leave a comment:


  • Kwinsteon
    replied
    Hope this helps. The file was too large since it had several days of data so I found where the smoke bridge test started and extracted the data from the data through the end of the original text file.
    Attached Files

    Leave a comment:


  • mnsandler
    replied
    please post logs as text files. the forum messes up the link breaks

    Leave a comment:


  • Kwinsteon
    replied
    FYI here is a portion of the log file after using the test button on the smoke detector. Not sure if it helps.


    026244A02605190006025044A02639D5302500FF 7/23/2022 1:07:47 PM - Sending http://192.168.1.111:25105/1?XB=M=1 7/23/2022 1:07:47 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 39 D5 30 25 00 FF 7/23/2022 1:07:47 PM - Received message from Guest Bedroom Smoke Bridge (44.A0.26) taking hops: 1 7/23/2022 1:07:47 PM - Received a Direct ACK from Guest Bedroom Smoke Bridge (44.A0.26): 44 A0 26 39 D5 30 25 00 FF 7/23/2022 1:08:40 PM - Saving comm stats... 7/23/2022 1:08:40 PM - ..finished saving comm stats. 7/23/2022 1:08:40 PM - Saved ini file. msecs=31 7/23/2022 1:08:40 PM - Saved ini file. msecs=15 7/23/2022 1:10:46 PM - ..My XML buffer: 025044A026000003CF1100025044A02639D530451103 7/23/2022 1:10:46 PM - Sending http://192.168.1.111:25105/1?XB=M=1 7/23/2022 1:10:47 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 00 00 03 CF 11 00 7/23/2022 1:10:47 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 39 D5 30 45 11 03 7/23/2022 1:10:47 PM - Received message from Guest Bedroom Smoke Bridge (44.A0.26) taking hops: 1 7/23/2022 1:10:47 PM - CheckRawMessageMatch: 01 44 A0 26 00 00 03 CF 11 00 against key ** 44 A0 26 00 00 01 C* 11 ** 7/23/2022 1:10:47 PM - CheckRawMessageMatch: 01 44 A0 26 00 00 03 CF 11 00 against key ** 44 A0 26 00 00 02 C* 11 ** 7/23/2022 1:10:47 PM - CheckRawMessageMatch: 01 44 A0 26 00 00 03 CF 11 00 against key ** 44 A0 26 00 00 03 C* 11 ** 7/23/2022 1:10:47 PM - ProcessGroupBroadcast: Device Guest Bedroom Smoke Bridge (44.A0.26) is group broadcast source sending cmd: Test Detected 7/23/2022 1:10:47 PM - Setting value for device 44.A0.26:1. Old Value:5, New Value: 3 7/23/2022 1:10:48 PM - ..My XML buffer: 025044A026110103CF0600 7/23/2022 1:10:48 PM - Sending http://192.168.1.111:25105/1?XB=M=1 7/23/2022 1:10:49 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 11 01 03 CF 06 00 7/23/2022 1:10:49 PM - Received message from Guest Bedroom Smoke Bridge (44.A0.26) taking hops: 1 7/23/2022 1:10:49 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 01 C* 11 ** 7/23/2022 1:10:49 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 02 C* 11 ** 7/23/2022 1:10:49 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 03 C* 11 ** 7/23/2022 1:10:49 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 04 C* ** ** 7/23/2022 1:10:49 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 05 C* 11 ** 7/23/2022 1:10:49 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 06 C* 11 ** 7/23/2022 1:10:49 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 07 C* 11 ** 7/23/2022 1:10:50 PM - ..My XML buffer: 026244A02605190006025044A02639D5302500FF 7/23/2022 1:10:50 PM - Sending http://192.168.1.111:25105/1?XB=M=1 7/23/2022 1:10:51 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 39 D5 30 25 00 FF 7/23/2022 1:10:51 PM - Received message from Guest Bedroom Smoke Bridge (44.A0.26) taking hops: 1 7/23/2022 1:10:51 PM - Received a Direct ACK from Guest Bedroom Smoke Bridge (44.A0.26): 44 A0 26 39 D5 30 25 00 FF 7/23/2022 1:10:58 PM - ..My XML buffer: 025044A026000003CF1100025044A02639D530451103025044A026110103 CF0600 7/23/2022 1:10:58 PM - Sending http://192.168.1.111:25105/1?XB=M=1 7/23/2022 1:10:59 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 00 00 03 CF 11 00 7/23/2022 1:10:59 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 39 D5 30 45 11 03 7/23/2022 1:10:59 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 11 01 03 CF 06 00 7/23/2022 1:10:59 PM - Received message from Guest Bedroom Smoke Bridge (44.A0.26) taking hops: 1 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 00 00 03 CF 11 00 against key ** 44 A0 26 00 00 01 C* 11 ** 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 00 00 03 CF 11 00 against key ** 44 A0 26 00 00 02 C* 11 ** 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 00 00 03 CF 11 00 against key ** 44 A0 26 00 00 03 C* 11 ** 7/23/2022 1:10:59 PM - ProcessGroupBroadcast: Device Guest Bedroom Smoke Bridge (44.A0.26) is group broadcast source sending cmd: Test Detected 7/23/2022 1:10:59 PM - Setting value for device 44.A0.26:1. Old Value:3, New Value: 3 7/23/2022 1:10:59 PM - Received message from Guest Bedroom Smoke Bridge (44.A0.26) taking hops: 1 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 01 C* 11 ** 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 02 C* 11 ** 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 03 C* 11 ** 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 04 C* ** ** 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 05 C* 11 ** 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 06 C* 11 ** 7/23/2022 1:10:59 PM - CheckRawMessageMatch: 01 44 A0 26 11 01 03 CF 06 00 against key ** 44 A0 26 00 00 07 C* 11 ** 7/23/2022 1:11:02 PM - ..My XML buffer: 026244A02605190006025044A02639D5302500FF 7/23/2022 1:11:02 PM - Sending http://192.168.1.111:25105/1?XB=M=1 7/23/2022 1:11:03 PM - Received STX 0x50 (Raw Insteon Rec):44 A0 26 39 D5 30 25 00 FF 7/23/2022 1:11:03 PM - Received message from Guest Bedroom Smoke Bridge (44.A0.26) taking hops: 1 7/23/2022 1:11:03 PM - Received a Direct ACK from Guest Bedroom Smoke Bridge (44.A0.26): 44 A0 26 39 D5 30 25 00 FF 7/23/2022 1:11:17 PM - Setting value for device 44.A0.26:1. Old Value:3, New Value: 5 --------*End Pre-Error Log*--------------

    Leave a comment:


  • Kwinsteon
    replied
    No rush. Been trying to figure it out and can’t seem to make any progress. FYI since switching to your plug-in and the HS plus hub s couple months ago I managed to get my other devices (15-20) up an running as desired. I also realized to update the firmware on my current and spare Insteon hubs before the new company starts their subscription service at the end of July and I will no longer have access to their server without a subscription. Thanks for all your help both current and past!

    Leave a comment:


  • mnsandler
    replied
    Originally posted by Kwinsteon View Post
    I’m also trying to set up a smoke bridge and it shows up in MYHS as a device but I can’t get any status information from the linked smoke/ CO detector. If I press the set button (to test) on the S Bridge the date and time is all that is reflected on the device in MYHS. In some older posts for HS3 setups the status for smoke, co, battery, error, all clear apparently can be displayed. I can’t figure out how to set up the bridge to get any feedback within the plugin, MYHS or through some event for notification through HS4. Any suggestions? Thanks.
    I'll have to pull out my beta smoke bridge and give it a try

    Leave a comment:


  • Kwinsteon
    replied
    I’m also trying to set up a smoke bridge and it shows up in MYHS as a device but I can’t get any status information from the linked smoke/ CO detector. If I press the set button (to test) on the S Bridge the date and time is all that is reflected on the device in MYHS. In some older posts for HS3 setups the status for smoke, co, battery, error, all clear apparently can be displayed. I can’t figure out how to set up the bridge to get any feedback within the plugin, MYHS or through some event for notification through HS4. Any suggestions? Thanks.

    FYI I have two links for the smoke bridge:
    Sensor has local control reporting to HomeSeer
    Sensor is controlled by HomeSeer using Hub Group #0 (i2CS Registration Link) - On Level : On

    Leave a comment:


  • mnsandler
    replied
    for support on events

    docs.homeseer.com

    and the following forum

    https://forums.homeseer.com/forum/hs...4-event-clinic

    Leave a comment:

Working...
X