Announcement

Collapse
No announcement yet.

Suggested settings when poor Insteon communication between the hub and devices?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cybershawngates
    replied
    Originally posted by greg@ihnen.me View Post
    Are there any suggested settings to use when having poor Insteon communication between the hub and devices?

    Is there a suggested setting for retries?

    How about response timeout?

    Or Failed Poll Threshold or Failed Tx Threshold?

    I'm assuming Debounce Time (ms) is for physical switches.
    Try these settings in my post here: https://forums.homeseer.com/forum/hs...45#post1549445

    I've got a very large install 100+ devices (I think it is like 130 with the leak sensors). One thing too to look at and see if I find esp the lamplinc switches tend to go bad and create a bunch of "noise" on the network. I looked at the signal strength in the plugin for the weakest devices and removed 1-2 of those flaky older insteon switches. I think that improved the reliability of the rest of the insteon devices and signaling.

    Leave a comment:


  • mnsandler
    replied
    Originally posted by greg@ihnen.me View Post
    Thanks. Any reason why the device does not respond but its icon changes? It shows that it responded but it didn’t.

    Would you suggest having the setting about “group command clean up” on or off?
    group cleanup should be on by default. a device may not respond for several reasons: bad links, noise/comm issues, etc

    please see the troubleshooting page (start at step 3). i need a detailed log of what is happening. there are instructions for posting the hs log

    https://forums.homeseer.com/forum/hs...in#post1547383

    Leave a comment:


  • Takoateli
    replied
    Thank you sir! I went ahead and deleted all of my events that had multiple individual devices, and made new events that use a group.

    At first I was having problems controlling devices but then I removed everybody from the group and added them all back and now it’s working perfectly.

    Leave a comment:


  • Takoateli
    replied
    Thanks. Any reason why the device does not respond but its icon changes? It shows that it responded but it didn’t.

    Would you suggest having the setting about “group command clean up” on or off?

    Leave a comment:


  • mnsandler
    replied
    create a plugin Group to control all those devices at once. it more efficient on the network.

    Leave a comment:


  • Takoateli
    replied
    Thank you! When the event runs the devices status indicator changes state but the device does not change state.

    Does this tell you anything?

    Insteon Plug-in Error Log Generated 5/27/2022 8:01:15 AM
    -----------*Error Message*----------------
    Error: Forced Error / log generation -- 5/27/2022 8:01:15 AM
    --------*Initialization Log*--------------
    5/27/2022 7:56:00 AM - Enter Initialize
    5/27/2022 7:56:00 AM - Host System: 192.168.1.99 running v4.2.12.0
    5/27/2022 7:56:00 AM - Plugin: Insteon.DLL - v4.0.3.0
    5/27/2022 7:56:00 AM - Plugin HSPI_Insteon.exe version: 4.0.3.0
    5/27/2022 7:56:00 AM - Insteon Support library (Insteon.dll) version: 1.4.3.0
    5/27/2022 7:56:00 AM - Initialize StartupReport Completed
    5/27/2022 7:56:00 AM - Enter InitPlugin
    5/27/2022 7:56:00 AM - Global initialization Of plug-In required, starting up.
    5/27/2022 7:56:00 AM - In ProcessRawReceiveThread
    5/27/2022 7:56:00 AM - Initializing Insteon hardware Interface...
    5/27/2022 7:56:00 AM - Scheduled polling enabled.
    5/27/2022 7:56:00 AM - Initializing Interface...
    5/27/2022 7:56:00 AM - PLMBuffer_ProcessBufferThread Enter
    5/27/2022 7:56:00 AM - Sending command 02 60 to Interface, (Expecting 6 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    5/27/2022 7:56:00 AM - Sending http://192.168.1.120:25105/1?XB=M=1
    5/27/2022 7:56:01 AM - Sending http://192.168.1.120:25105/3?0260=I=3
    5/27/2022 7:56:02 AM - ..My XML buffer: 02604A8EF10333A506000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000 0000000000000000000012
    5/27/2022 7:56:02 AM - Sending http://192.168.1.120:25105/1?XB=M=1
    5/27/2022 7:56:02 AM - ..Got Interface Response 02 60 4A 8E F1 03 33 A5 06
    5/27/2022 7:56:02 AM - PLMBuffer_Clean - Cleared 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 to locate next possible STX
    5/27/2022 7:56:02 AM - Sending command 02 60 to Interface, (Expecting 6 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    5/27/2022 7:56:03 AM - Sending http://192.168.1.120:25105/3?0260=I=3
    5/27/2022 7:56:04 AM - Sending http://192.168.1.120:25105/1?XB=M=1
    5/27/2022 7:56:06 AM - ..did not receive a response from the Interface
    5/27/2022 7:56:06 AM - ..Retry Home required. Pausing 250ms for Interface to clear...
    5/27/2022 7:56:06 AM - Sending http://192.168.1.120:25105/3?0260=I=3
    5/27/2022 7:56:06 AM - Sending http://192.168.1.120:25105/1?XB=M=1
    5/27/2022 7:56:09 AM - ..did not receive a response from the Interface
    5/27/2022 7:56:09 AM - ..Retry Forum required. Pausing 300ms for Interface to clear...
    5/27/2022 7:56:09 AM - Sending http://192.168.1.120:25105/3?0260=I=3
    5/27/2022 7:56:10 AM - ..My XML buffer: 02604A8EF10333A506000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000000000000 0000000000000000000012
    5/27/2022 7:56:10 AM - Sending http://192.168.1.120:25105/1?XB=M=1
    5/27/2022 7:56:10 AM - PLMBuffer_Clean - Cleared 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 to locate next possible STX
    5/27/2022 7:56:10 AM - ..Got Interface Response 02 60 4A 8E F1 03 33 A5 06
    5/27/2022 7:56:10 AM - Hub contacted on 192.168.1.120:25105 with an Insteon address of 4A.8E.F1 and firmware version A5
    5/27/2022 7:56:10 AM - ResourceManager::RequestExclusive for Resource 1
    5/27/2022 7:56:10 AM - ResourceManager::RequestExclusive acquired for Resource 1
    5/27/2022 7:56:10 AM - Sending command 02 6B 48 to Hub, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    5/27/2022 7:56:11 AM - Sending http://192.168.1.120:25105/3?026B48=I=3
    5/27/2022 7:56:12 AM - ..My XML buffer: 026B4806
    5/27/2022 7:56:12 AM - Sending http://192.168.1.120:25105/1?XB=M=1
    5/27/2022 7:56:12 AM - ..Got Hub Response 02 6B 48 06
    5/27/2022 7:56:12 AM - ResourceManager::ReleaseExclusive for Resource 1
    5/27/2022 7:56:12 AM - Insteon hardware Interface initialized.
    5/27/2022 7:56:12 AM - I/O (Insteon Protocol) Interface Initializing...
    5/27/2022 7:56:12 AM - Scheduled polling resumed.
    5/27/2022 7:56:12 AM - I/O(Insteon Protocol) Interface Initialized.
    5/27/2022 7:56:12 AM - Waiting to initialize External Devices...
    5/27/2022 7:56:12 AM - Exit InitPlugin
    5/27/2022 7:56:12 AM - In TransmitMessageThread
    5/27/2022 7:56:12 AM - Note: External device support script does not exist in the HomeSeer scripts directory.
    5/27/2022 7:56:12 AM - External Device Registration complete.
    5/27/2022 7:56:12 AM - Registering Basic settings page
    5/27/2022 7:56:12 AM - Registering Advanced settings page
    5/27/2022 7:56:12 AM - Reloading 1 Insteon group information tables...
    5/27/2022 7:56:13 AM - 1 matching HS device records were found and updated for the Insteon group database.
    5/27/2022 7:56:13 AM - In CreateDevices
    5/27/2022 7:56:13 AM - Scheduled polling temporarily stopped.
    5/27/2022 7:56:13 AM - Reloading 14 Insteon device information tables...
    5/27/2022 7:56:13 AM - 14 Matching HS device records were found and updated for the Insteon device database.
    5/27/2022 7:56:13 AM - Scheduled polling resumed.
    5/27/2022 7:56:13 AM - Exit CreateDevices
    5/27/2022 7:56:13 AM - Validating the Insteon plugin device that hold the insteon.ini contents
    5/27/2022 7:56:13 AM - Exit Initialize

    -----------*Pre-Error Log*----------------
    5/27/2022 7:56:14 AM - Generic Event Raised: Ready for Registration
    5/27/2022 7:56:23 AM - Saved ini file. msecs=46
    5/27/2022 8:01:12 AM - Saving comm stats...
    5/27/2022 8:01:12 AM - ..finished saving comm stats.
    --------*End Pre-Error Log*--------------
    --------*Start C:\Program Files (x86)\HomeSeer HS4\Config\Insteon.ini*--------------
    [Config]
    DoCleanups=1
    HS3EventsMigrated=1
    HS3X10Migrated=1
    HubPassword=xxxxxxxxxxxxxx== (I masked this)
    HubUsername=xxxxxxxxxxxxxx (I masked this)
    InterfaceCapability=5
    InterfacePort=192.168.1.120:25105
    MaxHops=3
    NumDevices=14
    NumGroups=1
    NumInterfaceLinks=46
    NumRetries=25
    RecreateDevices=0
    WaitTimeout=5
    X10Enabled=0
    [Device 1]
    DatabaseDelta=8
    DeviceID=14.ED.60
    DeviceLocation
    DeviceName=Backyard
    DeviceType=0206
    EEValues=LEDBrightness=15,OpFlags1=0
    FailedInteractions=2
    FirmwareVer=41
    HopData=76,36,2,38
    LastContact=5/15/2022 6:25:32 PM
    Link 1=A2 00 4A 8E F1 00 00 00 10
    Link 2=A2 10 4A 8E F1 FF 00 00 11
    Link 3=A2 13 4A 8E F1 FF 00 00 12
    Link 4=E2 01 4A 8E F1 00 00 01 13
    Link 5=A2 FE 4A 8E F1 FF 1F 01 14
    LinksDownloaded=1
    NumLinks=5
    PollingInterval=0
    Protocol=3
    RecentDatabaseDelta=8
    TotalInteractions=88
    [Device 10]
    DatabaseDelta=1
    DeviceID=47.B8.13
    DeviceLocation
    DeviceName=Living Room Lightds
    DeviceType=0238
    EEValues=LEDBrightness=15,OpFlags1=66
    FailedInteractions=0
    FirmwareVer=43
    HopData=69,66,3,0
    LastContact=5/15/2022 8:43:49 PM
    Link 1=A2 00 4A 8E F1 FF 00 00 1
    Link 2=E2 01 4A 8E F1 03 00 00 2
    Link 3=A2 10 4A 8E F1 FF 00 00 3
    Link 4=A2 FE 4A 8E F1 FF 1F 01 4
    LinksDownloaded=1
    NumLinks=4
    PollingInterval=0
    Protocol=3
    RecentDatabaseDelta=1
    TotalInteractions=73
    [Device 11]
    DatabaseDelta=22
    DeviceID=49.FD.F6
    DeviceLocation
    DeviceName=Waterfall
    DeviceType=021A
    FailedInteractions=3
    FirmwareVer=41
    HopData=239,108,3,128
    LastContact=5/16/2022 10:42:57 AM
    Link 1=E2 01 4A 8E F1 FF 1F 01 17
    Link 2=A2 FE 4A 8E F1 FF 1F 01 18
    LinksDownloaded=1
    NumLinks=2
    PollingInterval=0
    Protocol=1
    RecentDatabaseDelta=22
    TotalInteractions=225
    [Device 12]
    DatabaseDelta=16
    DeviceID=54.B3.B6
    DeviceLocation
    DeviceName=Back Waterfall
    DeviceType=0238
    FailedInteractions=1
    FirmwareVer=43
    HopData=354,179,9,166
    LastContact=5/15/2022 9:47:46 PM
    Link 1=E2 01 4A 8E F1 FF 1F 01 17
    Link 2=A2 FE 4A 8E F1 FF 1F 01 18
    LinksDownloaded=1
    NumLinks=2
    PollingInterval=0
    Protocol=1
    RecentDatabaseDelta=16
    TotalInteractions=364
    [Device 13]
    DatabaseDelta=28
    DeviceID=08.29.63
    DeviceLocation
    DeviceName=Tree House
    DeviceType=0209
    FailedInteractions=3
    FirmwareVer=28
    HopData=334,166,4,164
    LastContact=5/15/2022 10:29:00 PM
    Link 1=A2 FE 4A 8E F1 FF 1F 01 20
    Link 2=A2 01 4A 8E F1 FF 1F 01 21
    LinksDownloaded=1
    NumLinks=2
    PollingInterval=0
    Protocol=1
    RecentDatabaseDelta=28
    TotalInteractions=337
    [Device 14]
    DatabaseDelta=10
    DeviceID=47.B8.DD
    DeviceLocation=Kitchen
    DeviceName=Kitchen Table Light
    DeviceType=0238
    EEValues=LEDBrightness=15,OpFlags1=66
    FailedInteractions=0
    FirmwareVer=43
    HopData=80,80,0,0
    LastContact=5/25/2022 9:54:51 PM
    Link 1=E2 01 4A 8E F1 00 00 01 8
    Link 2=A2 00 4A 8E F1 00 00 00 9
    Link 3=A2 FE 4A 8E F1 FF 1F 01 10
    Link 4=A2 01 4A 8E F1 FF 1F 01 11
    LinksDownloaded=1
    NumLinks=4
    PollingInterval=0
    Protocol=3
    RecentDatabaseDelta=10
    TotalInteractions=68
    [Device 2]
    DatabaseDelta=25
    DeviceID=09.F8.D6
    DeviceLocation
    DeviceName=Cottage Closet Switch
    DeviceType=020A
    FailedInteractions=6
    FirmwareVer=2C
    HopData=237,138,8,91
    LastContact=5/15/2022 6:42:03 PM
    Link 1=E2 01 4A 8E F1 FF 1F 01 13
    Link 2=A2 FE 4A 8E F1 FF 1F 01 14
    LinksDownloaded=1
    NumLinks=2
    PollingInterval=0
    Protocol=1
    RecentDatabaseDelta=25
    TotalInteractions=250
    [Device 3]
    DatabaseDelta=2
    DeviceID=20.71.B1
    DeviceLocation
    DeviceName=Cottage Down Light
    DeviceType=022A
    EEValues=LEDBrightness=63,OpFlags1=0
    FailedInteractions=14
    FirmwareVer=42
    HopData=212,166,11,35
    LastContact=5/16/2022 3:01:51 AM
    Link 1=AA 00 4A 8E F1 00 1C 01 10
    Link 2=F2 01 4A 8E F1 03 1C 01 11
    Link 3=E2 01 4A 8E F1 00 00 01 14
    Link 4=A2 FE 4A 8E F1 FF 1F 01 15
    LinksDownloaded=1
    NumLinks=4
    PollingInterval=0
    Protocol=3
    RecentDatabaseDelta=2
    TotalInteractions=131
    [Device 4]
    DatabaseDelta=45
    DeviceID=09.F8.C6
    DeviceLocation
    DeviceName=End Room Down Light
    DeviceType=020A
    FailedInteractions=5
    FirmwareVer=2C
    HopData=182,163,11,8
    LastContact=5/15/2022 7:07:59 PM
    Link 1=A2 00 4A 8E F1 FE 1F 00 7
    Link 2=E2 01 4A 8E F1 FF 1F 01 9
    Link 3=A2 FE 4A 8E F1 FF 1F 01 10
    LinksDownloaded=1
    NumLinks=3
    PollingInterval=0
    Protocol=1
    RecentDatabaseDelta=45
    TotalInteractions=195
    [Device 5]
    DatabaseDelta=27
    DeviceID=0B.BC.65
    DeviceLocation
    DeviceName=Front Controller
    DeviceType=020A
    FailedInteractions=0
    FirmwareVer=2C
    HopData=236,231,4,1
    LastContact=5/21/2022 2:15:06 AM
    Link 1=A2 00 4A 8E F1 FE 1F 00 11
    Link 2=E2 01 4A 8E F1 FF 1F 01 13
    Link 3=A2 FE 4A 8E F1 FF 1F 01 14
    LinksDownloaded=1
    NumLinks=3
    PollingInterval=0
    Protocol=1
    RecentDatabaseDelta=27
    TotalInteractions=239
    [Device 6]
    DatabaseDelta=5
    DeviceID=20.7F.F5
    DeviceLocation
    DeviceName=Front Door Light
    DeviceType=022A
    EEValues=LEDBrightness=63,OpFlags1=0
    FailedInteractions=0
    FirmwareVer=42
    HopData=95,95,0,0
    LastContact=5/15/2022 7:34:46 PM
    Link 1=AA 00 4A 8E F1 00 1C 01 2
    Link 2=EA 01 4A 8E F1 03 1C 01 3
    Link 3=E2 01 4A 8E F1 00 00 01 6
    Link 4=A2 FE 4A 8E F1 FF 1F 01 7
    LinksDownloaded=1
    NumLinks=4
    PollingInterval=0
    Protocol=3
    RecentDatabaseDelta=5
    TotalInteractions=84
    [Device 7]
    DatabaseDelta=21
    DeviceID=08.2B.D8
    DeviceLocation
    DeviceName=Hall Picture Light
    DeviceType=0209
    FailedInteractions=1
    FirmwareVer=28
    HopData=131,124,5,2
    LastContact=5/15/2022 7:38:45 PM
    Link 1=A2 00 4A 8E F1 FE 1F 00 4
    Link 2=A2 FE 4A 8E F1 FF 1F 01 6
    LinksDownloaded=1
    NumLinks=2
    PollingInterval=0
    Protocol=1
    RecentDatabaseDelta=21
    TotalInteractions=151
    [Device 8]
    DatabaseDelta=2
    DeviceID=50.CE.1B
    DeviceLocation
    DeviceName=Moon Lights
    DeviceType=022A
    EEValues=LEDBrightness=63,OpFlags1=0
    FailedInteractions=0
    FirmwareVer=45
    HopData=31,31,0,0
    LastContact=5/15/2022 8:20:57 PM
    Link 1=AA 00 4A 8E F1 FF 1C 01 1
    Link 2=EA 01 4A 8E F1 03 1C 01 2
    Link 3=AA 16 4A 8E F1 FF 1C 01 3
    Link 4=E2 01 4A 8E F1 00 00 01 4
    Link 5=A2 FE 4A 8E F1 FF 1F 01 5
    LinksDownloaded=1
    NumLinks=5
    PollingInterval=0
    Protocol=3
    RecentDatabaseDelta=2
    TotalInteractions=21
    [Device 9]
    DatabaseDelta=1
    DeviceID=51.1E.E6
    DeviceLocation
    DeviceName=Front Light Where?
    DeviceType=022A
    EEValues=LEDBrightness=63,OpFlags1=34
    FailedInteractions=0
    FirmwareVer=45
    HopData=66,66,0,0
    LastContact=5/15/2022 8:39:21 PM
    Link 1=AA 00 4A 8E F1 00 1C 01 1
    Link 2=E2 01 4A 8E F1 03 1C 01 2
    Link 3=A2 FE 4A 8E F1 FF 1F 01 3
    LinksDownloaded=1
    NumLinks=3
    PollingInterval=0
    Protocol=3
    RecentDatabaseDelta=1
    TotalInteractions=72
    [Group 1]
    GroupLocation
    GroupName=Outside Lights
    GroupNum=1
    NumParticipants=11
    Participants=08.29.63:1,100,31,08.2B.D8:1,100,31,09.F8.C6:1, 100,31,09.F8.D6:1,100,31,0B.BC.65:1,100,31,14.ED.60:1,100,31 ,20.71.B1:1,100,31,20.7F.F5:1,100,31,47.B8.13:1,100,31,47.B8 .DD:1,100,31,51.1E.E6:1,100,31
    [Settings]
    HubUsername= xxxxxxxxx (I masked this)
    --------*End C:\Program Files (x86)\HomeSeer HS4\Config\Insteon.ini*--------------




    Leave a comment:


  • mnsandler
    replied
    Originally posted by greg@ihnen.me View Post
    My understanding is that unless I put the switches into the pairing mode and pair them to the hub they are only working singleband through the wiring. They're not doing the RF communication.
    This is not true. you just need to add the device via the plugin. insteon takes care of powerline and RF comm internally. you have no control over that.

    post a pic of your event with the devices you are trying to control

    Leave a comment:


  • Takoateli
    replied
    According to the numbers the communication looks good, but I am having issues where I have to run an event multiple times to get all of the lights to respond.
    My understanding is that unless I put the switches into the pairing mode and pair them to the hub they are only working singleband through the wiring. They're not doing the RF communication.

    Most of the devices are spaced pretty far apart so I'm not sure how much RF communication would help if enabled, but I would imagine it could only help.

    Is that correct?

    Leave a comment:


  • mnsandler
    replied
    the logged errors only occur when you try to install a plugin update and hs4 needs to be rebooted first. no worries there.

    the comm stats look okay

    you can run it on several devices at once and compare the results of other devices physically located near the one in question

    Leave a comment:


  • Takoateli
    replied
    I just tested again and got different results

    Leave a comment:


  • Takoateli
    replied
    43 0 i1 100% (1 failed out of 275 cmds) 116 2 166 Good

    Leave a comment:


  • Takoateli
    replied
    These are the only errors I see


    5/25/2022 9:26:23 PM
    HomeSeer Updater
    Error
    Copying source to C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe, detailed error: The process cannot access the file 'C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe' because it is being used by another process.

    5/25/2022 9:15:48 PM
    HomeSeer Updater
    Error
    Copying source to C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe, detailed error: The process cannot access the file 'C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe' because it is being used by another process.

    5/25/2022 9:15:00 PM
    HomeSeer Updater
    Error
    Copying source to C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe, detailed error: The process cannot access the file 'C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe' because it is being used by another process.

    5/25/2022 9:14:10 PM
    HomeSeer Updater
    Error
    Copying source to C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe, detailed error: The process cannot access the file 'C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe' because it is being used by another process.

    5/25/2022 9:14:00 PM
    HomeSeer Updater
    Error
    Copying source to C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe, detailed error: The process cannot access the file 'C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe' because it is being used by another process.

    5/25/2022 9:13:47 PM
    HomeSeer Updater
    Error
    Copying source to C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe, detailed error: The process cannot access the file 'C:\Program Files (x86)\HomeSeer HS4\HSPI_Insteon.exe' because it is being used by another process.



    Leave a comment:


  • Takoateli
    replied
    Here's one device I have trouble controlling

    Leave a comment:


  • mnsandler
    replied
    Originally posted by greg@ihnen.me View Post
    Are there any suggested settings to use when having poor Insteon communication between the hub and devices?

    Is there a suggested setting for retries?

    How about response timeout?

    Or Failed Poll Threshold or Failed Tx Threshold?

    I'm assuming Debounce Time (ms) is for physical switches.

    can you define poor performance?

    what do your stats look like? post a pic from the plugin Devices page

    do you see any errors in the hs log?

    Leave a comment:


  • mrceolla
    replied
    I can't provide great insight into those specific questions, but I can say from experience you would likely benefit greatly from determining the cause of the poor communication and rectifying that.

    My current settings are:

    Max Hops: 4
    Retries: 5
    Timeout: 3

    Leave a comment:

Working...
X