Plugin worked well for hours then stopped and hasn't worked since

[mikeycoll]

I'm going to try again with a better sensor, I'll let you know.

[warren@wcnjsmith.com]

Have you made any progress on getting your install to work again. I am still down.

[salvesen]

I'm having some trouble with Modbusseer 1.0.0.2 on HS 4.2. I installed the plugin, added the sensors and everything worked for about 4 hours then stopped receiving data from the registers in the sensor. I used Modbus Poll and can see the data in the registers but nothing comes through Modbusseer. Tried uninstalling and reinstalling with no difference

These are the settings for the sensor.

Modbus Gateway hostname or IP address: 192.168.1.150
TCP port: 502
Poll interval: 0:00:10
Disable Big-Endian Values: No
Zero-based Addressing: No
Read/Write Retries: 2
Read/Write Timeout (ms)): 2000
Delay between each address poll (ms): 5000
Write Multiple Registers

Gateway: Co2-T-H
Register Type: Holding Register (RW)
Slave ID: 1
Register Addresses 205 / 207 / 211
Return Type: Int16
Signed Value: No
Multiplier: 0.1
Read Only Device: Yes
Device Enabled: Yes

Log entries
3/05/2022 15:14:33
modbusSeer
Error
Catched while updating! E: EasyModbus.Exceptions.ConnectionException: connection timed out at EasyModbus.ModbusClient.Connect() at HSPI_modbusSeer.devices.pluginDevices.updateDevices()

3/05/2022 15:14:02
modbusSeer
Debug
Catched at readHoldingRegister: System.InvalidOperationException: Nullable object must have a value. at System.ThrowHelper.ThrowInvalidOperationException(ExceptionR esource resource) at HSPI_modbusSeer.serial.modbus.readHoldingRegister(ModbusClie nt client, addDevicesPageResponse slave)

3/05/2022 15:12:31
modbusSeer
Error
Catched while updating! E: EasyModbus.Exceptions.ConnectionException: connection timed out at EasyModbus.ModbusClient.Connect() at HSPI_modbusSeer.devices.pluginDevices.updateDevices()
Plugin Restart Messages

3/05/2022 15:32:01
modbusSeer
Error
Catched while updating! E: EasyModbus.Exceptions.ConnectionException: connection timed out at EasyModbus.ModbusClient.Connect() at HSPI_modbusSeer.devices.pluginDevices.updateDevices()

3/05/2022 15:32:00
HomeSeer
Starting Plug-In
Plugin modbusSeer started successfully in 282 milliseconds

3/05/2022 15:32:00
HomeSeer
Starting Plug-In
Initializing plugin modbusSeer ...

3/05/2022 15:32:00
HomeSeer
Info
Plugin modbusSeer with instance modbusSeer has connected. IP:127.0.0.1:34096

3/05/2022 15:32:00
HomeSeer
Plug-In
Finished initializing plug-in modbusSeer

Hi,

Seems like it is not able to connect to the adapter for some reason. I have this sometimes on my adapter as well. Then i restart the adapter and it works. Let me know if this resolves the issue for you as well.

[mikeycoll]

I'm having some trouble with Modbusseer 1.0.0.2 on HS 4.2. I installed the plugin, added the sensors and everything worked for about 4 hours then stopped receiving data from the registers in the sensor. I used Modbus Poll and can see the data in the registers but nothing comes through Modbusseer. Tried uninstalling and reinstalling with no difference

These are the settings for the sensor.

Modbus Gateway hostname or IP address: 192.168.1.150
TCP port: 502
Poll interval: 0:00:10
Disable Big-Endian Values: No
Zero-based Addressing: No
Read/Write Retries: 2
Read/Write Timeout (ms)): 2000
Delay between each address poll (ms): 5000
Write Multiple Registers

Gateway: Co2-T-H
Register Type: Holding Register (RW)
Slave ID: 1
Register Addresses 205 / 207 / 211
Return Type: Int16
Signed Value: No
Multiplier: 0.1
Read Only Device: Yes
Device Enabled: Yes

Log entries
3/05/2022 15:14:33
modbusSeer
Error
Catched while updating! E: EasyModbus.Exceptions.ConnectionException: connection timed out at EasyModbus.ModbusClient.Connect() at HSPI_modbusSeer.devices.pluginDevices.updateDevices()

3/05/2022 15:14:02
modbusSeer
Debug
Catched at readHoldingRegister: System.InvalidOperationException: Nullable object must have a value. at System.ThrowHelper.ThrowInvalidOperationException(ExceptionR esource resource) at HSPI_modbusSeer.serial.modbus.readHoldingRegister(ModbusClie nt client, addDevicesPageResponse slave)

3/05/2022 15:12:31
modbusSeer
Error
Catched while updating! E: EasyModbus.Exceptions.ConnectionException: connection timed out at EasyModbus.ModbusClient.Connect() at HSPI_modbusSeer.devices.pluginDevices.updateDevices()
Plugin Restart Messages

3/05/2022 15:32:01
modbusSeer
Error
Catched while updating! E: EasyModbus.Exceptions.ConnectionException: connection timed out at EasyModbus.ModbusClient.Connect() at HSPI_modbusSeer.devices.pluginDevices.updateDevices()

3/05/2022 15:32:00
HomeSeer
Starting Plug-In
Plugin modbusSeer started successfully in 282 milliseconds

3/05/2022 15:32:00
HomeSeer
Starting Plug-In
Initializing plugin modbusSeer ...

3/05/2022 15:32:00
HomeSeer
Info
Plugin modbusSeer with instance modbusSeer has connected. IP:127.0.0.1:34096

3/05/2022 15:32:00
HomeSeer
Plug-In
Finished initializing plug-in modbusSeer