Zigbee Devices keep getting removed

[NC-Lou]

Hi,

I am able to add Sercomm Corp. Tripper Zigbee device to my network, but a few seconds later it gets removed:

8/05/2020 10:16:17 Zigbee Info Node removed: ZigBeeNode [IEEE=7CE5240000092F51, NWK=0xBFB7, Type=END_DEVICE]
8/05/2020 10:16:12 Zigbee Info 49079: Created Contact Switch HS Feature for 49079/1
8/05/2020 10:16:11 Zigbee Info Attribute Battery Percentage Remaining not supported
8/05/2020 10:16:10 Zigbee Info Created root HS Device for Sercomm Corp. - Tripper - 49079
8/05/2020 10:16:08 Zigbee Info Node added: ZigBeeNode [IEEE=7CE5240000092F51, NWK=0xBFB7, Type=END_DEVICE]
8/05/2020 10:16:05 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=7CE5240000092F51, NWK=0xBFB7]

Additionally when I try to add a SmartThings Multi Sensor [2015] I get a similar error, but the device is never recognized:

8/05/2020 10:13:57 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B10CD4B, NWK=0x9F52]
8/05/2020 10:13:41 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B10CD4B, NWK=0x8459]
8/05/2020 10:13:37 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B10CD4B, NWK=0x8459]
8/05/2020 10:13:31 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B10CD4B, NWK=0x3A2A]
8/05/2020 10:13:27 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B10CD4B, NWK=0x3A2A]
8/05/2020 10:13:26 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B10CD4B, NWK=0xBC3C]
8/05/2020 10:13:07 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B10CD4B, NWK=0xBC3C]
8/05/2020 10:13:00 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B10CD4B, NWK=0x7855]
8/05/2020 10:12:56 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B10CD4B, NWK=0x7855]
8/05/2020 10:12:48 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B10CD4B, NWK=0xFBB1]
8/05/2020 10:12:44 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B10CD4B, NWK=0xFBB1]
8/05/2020 10:12:37 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B10CD4B, NWK=0x1219]
8/05/2020 10:12:33 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B10CD4B, NWK=0x1219]
8/05/2020 10:11:33 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0xE8B0]
8/05/2020 10:11:29 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0xE8B0]
8/05/2020 10:11:08 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0xA853]
8/05/2020 10:11:04 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0xA853]
8/05/2020 10:11:03 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0x3188]
8/05/2020 10:10:41 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0x3188]
8/05/2020 10:10:32 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0x7AE2]
8/05/2020 10:10:25 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0x7AE2]
8/05/2020 10:10:17 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0x8210]
8/05/2020 10:10:13 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0x8210]
8/05/2020 10:09:57 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0xB1FD]
8/05/2020 10:09:53 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0xB1FD]
8/05/2020 10:09:31 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0x3C2C]
8/05/2020 10:09:27 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0x3C2C]
8/05/2020 10:09:19 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0x7D45]
8/05/2020 10:09:15 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0x7D45]
8/05/2020 10:09:07 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0x0520]
8/05/2020 10:09:03 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0x0520]
8/05/2020 10:08:48 Zigbee Info Node removed: ZigBeeNode [state=OFFLINE, IEEE=000D6F000B6640D0, NWK=0x6CC4]
8/05/2020 10:08:45 Zigbee Info Node added: ZigBeeNode [state=ONLINE, IEEE=000D6F000B6640D0, NWK=0x6CC4]

Any ideas on what I may be doing wrong?

Thanks

[NC-Lou]

Hi,

I verified that I have the latest Nortek drivers installed, and tried a bunch of different sensors (Trippers and SmartThings Multisensor [2015 model]) with the same results. If anyone has and ideas to help I would appreciate it.

Thanks,
Lou