Announcement

Collapse
No announcement yet.

Sonoff SNZB-04

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Sonoff SNZB-04

    I have installed several SNZB-04 Door/window sensors. They are working excellent however, wen added to the network the device for battery level was not created and on system startup the plugin complains about a configuration error. After the initial system start there are no other errors reported.
    Any help welcome. I am new to zigebee

    Thanks

    #2
    I would need to see some logs to help you with this problem.
    Can you set the log level to debug, go to Plugins > Zigbee > Manage Devices, and click the Re-import button? Is the battery feature created then? what do you get in the logs?

    Comment


      #3
      Below is from stopping and restarting the plugin. I do not have a re-import button n Manage devices, Only scan for new
      1/27/2021 2:10:06 PM
      Zigbee
      Info
      Attribute Battery Percentage Remaining not supported

      1/27/2021 2:09:58 PM
      Zigbee
      Error
      Error while discovering supported attributes for basic cluster for node ZigBeeNode [IEEE=00124B00226590A8, NWK=0x232E, Type=END_DEVICE]

      1/27/2021 2:09:42 PM
      Zigbee
      Info
      Attribute Battery Percentage Remaining not supported

      1/27/2021 2:09:37 PM
      Zigbee
      Warning
      "9006/1": IAS CIE address is NOT confirmed null

      1/27/2021 2:09:34 PM
      Zigbee
      Error
      Error while discovering supported attributes for basic cluster for node ZigBeeNode [IEEE=00124B0022680285, NWK=0x0D77, Type=END_DEVICE]

      1/27/2021 2:09:29 PM
      Zigbee
      Warning
      "46232/1": IAS CIE address is NOT confirmed null

      1/27/2021 2:09:29 PM
      Zigbee
      Warning
      "3447/1": IAS CIE address is NOT confirmed null

      1/27/2021 2:09:18 PM
      Zigbee
      Info
      Attribute Battery Percentage Remaining not supported

      1/27/2021 2:09:10 PM
      Zigbee
      Error
      Error while discovering supported attributes for basic cluster for node ZigBeeNode [IEEE=00124B0022680453, NWK=0xB498, Type=END_DEVICE]

      1/27/2021 2:09:05 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=5C0272FFFE67C9D6, NWK=0xA7DC, Type=ROUTER]

      1/27/2021 2:09:05 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=5C0272FFFE67C9D6, NWK=0xA7DC, Type=ROUTER]

      1/27/2021 2:09:05 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=000D6F00150EAE7F, NWK=0x0000, Type=COORDINATOR]

      1/27/2021 2:09:05 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=00124B00226590A8, NWK=0x232E, Type=END_DEVICE]

      1/27/2021 2:09:05 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=60A423FFFECEE3F0, NWK=0xA9D1, Type=ROUTER]

      1/27/2021 2:09:05 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=00124B0022680285, NWK=0x0D77, Type=END_DEVICE]

      1/27/2021 2:09:05 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=60A423FFFECEE3F0, NWK=0xA9D1, Type=ROUTER]

      1/27/2021 2:09:04 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=F0D1B8000001C7DE, NWK=0x3073, Type=ROUTER]

      1/27/2021 2:09:04 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=F0D1B8000001C7DE, NWK=0x3073, Type=ROUTER]

      1/27/2021 2:09:04 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=000D6F00150EAE7F, NWK=0x0000, Type=COORDINATOR]

      1/27/2021 2:09:02 PM
      Zigbee
      Info
      Node added: ZigBeeNode [IEEE=00124B0022680453, NWK=0xB498, Type=END_DEVICE]

      1/27/2021 2:09:02 PM
      Zigbee
      Info
      Zigbee Network Manager initialized successfully

      1/27/2021 2:08:58 PM
      HomeSeer
      Starting Plug-In
      Plugin Zigbee started successfully in 555 milliseconds

      1/27/2021 2:08:58 PM
      Zigbee
      Info
      Zigbee version 4.0.8.0

      1/27/2021 2:08:57 PM
      HomeSeer
      Starting Plug-In
      Initializing plugin Zigbee ...

      1/27/2021 2:08:57 PM
      HomeSeer
      Info
      Plugin Zigbee with instance Zigbee has connected. IP:127.0.0.1:59644

      1/27/2021 2:08:57 PM
      HomeSeer
      Plug-In
      Finished initializing plug-in Zigbee

      1/27/2021 2:08:31 PM
      HomeSeer
      Info
      Plugin Zigbee with ID: Zigbee and Instance: has disconnected

      1/27/2021 2:08:30 PM
      Zigbee
      Info
      Shutting Down plug-in

      1/27/2021 2:08:30 PM
      HomeSeer
      Plug-In
      Shutting down Plug-In: Zigbee



      Entries 0 to 29 of 29

      Comment


        #4
        Found the re-import. Ran it on one one of the door sensors

        imeom
        Type
        Message
        1/27/2021 3:04:25 PM
        Legacy-Plugin
        Z-Wave
        Device: Tracie's Bath Z-Wave Cieling Light Set to 0

        1/27/2021 3:03:37 PM
        Zigbee
        Info
        Attribute Battery Percentage Remaining not supported

        1/27021 3:03:29 PM
        Zigbee
        Error
        Error while discovering supported attributes for basic cluster for node ZigBeeNode [IEEE=00124B0022680285, NWK=0x0D77, Type=END_DEVICE]

        1/27/2021 3:03:24 PM
        Legacy-Plugin
        Z-Wave
        Device: Tracie's Bath Z-Wave Motion Set to NOTIFICATION for type Home Security, Event: No Event
        it Sorry Did find the re-import. Ran it on one one of the door sensors

        Comment


          #5
          Did you set the log level to Debug in Plugins > Zigbee > Settings?

          When you add a device or re-import it, you need to make sure that it is awake and that it is close to the USB dongle.

          So try a re-import of the same device (00124B0022680285) then post the logs you get as well as the file Data/ZigbeeData.json/00124B0022680285.json

          Comment


            #6
            Spud,

            I could not get to the door sensor I sent the first data for. So I have a spare. I added it to the zigbee plugin while logging in the debug mode, file attached. Also I included
            the .jason from the original sensor. Had to change .jason to .txt

            Hope this helps and thank you so much for looking into this
            Attached Files

            Comment


              #7
              Spud,

              Have you had the time to look at this? Do you need anything else I can provide?
              No rush I know you have a lot on your plate

              Thanks
              Ed

              Comment


                #8
                Please install version Beta 4.0.9 and re-import your device, it should now create a battery% feature.

                Comment


                  #9
                  Thank you sir, I have installed the Beta and re-imported. The battery device is now added and the value is 0, Will wait to see if it updates. The
                  plugin is generating several errors in the loge on startup. Loge file attached.
                  Again many thanks for the prompt attention.
                  log.txt

                  Comment


                    #10
                    Spud,

                    The battery device while created does not update. it stays at ).)%. Could that be related to the errors in the log sent above?

                    Comment


                      #11
                      Any update!

                      Comment


                        #12
                        Just installed the Nortek device and the Zigbee plug-in.I've followed the thread and see where the Battery feature had been added, but the battery percentage does not update. Is there any progress on retrieving the value from the device?

                        Also the Centralite sensor that is supported has a 3-axis feature for use on garage doors. Will the plug-in be able to reflect "tilt" so we can tell when a garage door is opened or closed?

                        Thanks!

                        Comment

                        Working...
                        X