AKWeather NOAA, Metoffice UK.. - 40 providers! PWS local Davis, Ecowitt, AW, Tempest

[alexbk66]

Ver 4.0.2.7 (BETA) - Error checking when adding TimeZone offset

Something wrong in calculating TimeZone Offset for hourly forecast. I added more error checking, keep an eye on the logs.

P.S. Please start new thread for any issues, don't pollute this one.

[alexbk66]

Ver 4.0.2.14 - Added ControlByWeb X-320M™ | Web-Enabled Weather Station (Should also work with newer X-422)

[alexbk66]

Ver 4.0.2.15 - WeatherBit - Added Alerts, Solarrad and AQI
Ver 4.0.2.16 - Fixed Default Update Rate (when creating new Location); AmbientWeatherLocal & WeatherFlowLocal - Shutdown local UDP Listener

[alexbk66]

Ver 4.0.2.17 - Fixed devises becoming "Not Used"

[alexbk66]

Weatherflow Tempest Coupon Code 10% off

Use the coupon code to get 10% off at https://shop.weatherflow.com/?ref=WFieFN8mLzu3y

ALEXKHASSAPOV

[alexbk66]

Ver 4.0.2.32 (BETA)

- Configurable TimeStamp format
- Implemented AlertTrigger
- Added Test Alerts
- Improved NOAA1 Alerts

See https://forums.homeseer.com/forum/hs...68#post1470268

[alexbk66]

Ver 4.0.2.45 (BETA)

- Added Sun Altitude/Azimuth
- Configurable hourly forecast timestamp format

[alexbk66]

Ver 4.0.2.50 (BETA) - Added Precipitation/Hr device (Accuweather, AmbientWeather, Buienradar, CanWeather, Ecowitt, KNMI, Meteobridge, Netatmo, NOAA2, WeatherFlow, WeatherLink)

The Precipitation vs Precipitation/Hr definition differs between providers, so please keep an eye and let me know of any issues.

[alexbk66]

Ver 4.0.2.53 (BETA) - AmbientWeather (Server) - added arrays of extra temperatures, humidities, batteries

[alexbk66]

Ver 4.0.2.54 (BETA) - Fix saving provider Lat/Lon; Fix GetCelestial - UTC time (Altitude and Azimuth of the sun)

Ver 4.0.2.56 (BETA) - Ecowitt: Allow manually enter PWS IP Address if UDP discovery doesn't work (or for multiple PWSs)

[alexbk66]

Ver 4.0.2.57 - Improved Ecowitt discovery and allow setting IP address manually if UDP discovery doesn't work

[fritch1616]

Alex,

Excellent work on the weather station plugin!

I add a few additional sensors to my Ambient Weather 5000 recently. I am uploading my log file for your reference.

batt1 through batt8 are tied to the temp/humidity sensors (WH31E) (temp1f through temp8f and humidity1 through humidity 8). The batteries are reporting 0% even though they are new batteries. This is similar to what we saw on the battery readings for the main AW5000 unit a while back.

battsm1 through battsm8 are tied to the soil moisture sensors. (soilhum1 through soilhum8). It doesn't look like you are parsing out this particular battery.

batt_lightning is reporting 0%, but I think this is an error with my device. I reset it and it has picked up any data yet. I'll keep an eye on this one.

No rush on getting these in the plugin. Let me know if you need any additional information.

Thanks!

[alexbk66]

Alex,

Excellent work on the weather station plugin!

I add a few additional sensors to my Ambient Weather 5000 recently. I am uploading my log file for your reference.

batt1 through batt8 are tied to the temp/humidity sensors (WH31E) (temp1f through temp8f and humidity1 through humidity 8). The batteries are reporting 0% even though they are new batteries. This is similar to what we saw on the battery readings for the main AW5000 unit a while back.

battsm1 through battsm8 are tied to the soil moisture sensors. (soilhum1 through soilhum8). It doesn't look like you are parsing out this particular battery.

batt_lightning is reporting 0%, but I think this is an error with my device. I reset it and it has picked up any data yet. I'll keep an eye on this one.

No rush on getting these in the plugin. Let me know if you need any additional information.

Thanks!

Please don't pollute the main thread with provider specific issues:

https://forums.homeseer.com/forum/hs...-5000-recently

[alexbk66]

Ver 4.0.2.65 (BETA) - Ecowitt - fixed some battery readings, also skip some invalid battery readings.

I suggest deleting all battery child devices, then after restarting plugin only valid devices should be created.

I added logging of skipped battery readings just in case.

I also add sensor ID to the battery device name, so you can verify if it's the correct sensor (by comparing the ID with ids in WSView app):

[alexbk66]

alexbk66 All batteries came in and show there ID's. That's great, thanks. Also, FYI, the WH51 Moisture Sensor had a lithium 1.5V battery in it and the battery level showed 113%. I put in an alkaline 1.5V battery and it changed to 100%. So lithium batteries are not reading right and it would be nice if they did because those type of batteries are best for outside in heat and cold.
[EDIT] I am seeing this in the list of devices. It wasn't noticeable at first. It looks like a parent but it shows as a child and has no other devices associated with it. I don't have a device 3 in the app. Just 1,2 and 4. Device 3 has no batteries in it.

Wrong thread. https://forums.homeseer.com/forum/hs...15#post1551815