uRADMonitor Air Quality Sensors

[brientim]

Hello Alex,

Thank you for you work and the update.
All working well, and the update in post#2 was straight forward.
Please see suggested changes below.
Pressure is correct when pulled by remote API but needs to be decided by 100
All other apply to local and remote API

Feature	Comments	SI	Icon
Pressure	divide by 100 (local) rounded	hPa
Air Quality Ch2o	Formaldehyde CH2o - icon update	ppm	new CH2o icon attached
Air Quality CO2	Carbon Dioxide CO2 - icon update	ppm	CO2.gif
Air Quality CPM	Renamed Radiation - icon update	cpm	radiation.png
Air Quality Voc	Renamed Air Quality VOC - icon update	ppm	organic_compound.png
Noise	icon update	dB	loudness.png
BATTERY	In the case is the voltage of A3 geiger counter	V	could be ignored

[alexbk66]

Thanks Tim. You attached only one icon?
Also icon for pressure could be improved?

[brientim]

Thanks Tim. You attached only one icon?
Also icon for pressure could be improved?

Some of them were the standard HS Status icons located \html\images\HomeSeer\status\
Otherwise see attached.
Pressure use \html\images\HomeSeer\status\pressure.png if not in the attached.
Add an Info one as well

[alexbk66]

Ver 4.0.1.49 - Made the above changes, need to delete HS devices (except for Location root)

[brientim]

Hello Alex,

Thank you and working as it should.

Air Quality CPM

Renamed Radiation - icon update

I have done this manually and renamed the Feature to Radiation.

I have also included a few better icons for loudness, pressure (Barometer or hPA), radiation, thermometer, VOC, Co2, and Pm2.5

[alexbk66]

Thanks Tim, Ver 4.0.1.50 - untested 😪

[brientim]

Hello Alex,

I was a bit late to resume the review and 4.0.1.51 beta has been released. When this was enable this broke a few of the devices as displayed in the attached screen grab of 4.0.1.51.

[alexbk66]

Hi Tim,

I'll check...

[alexbk66]

this broke a few of the devices as displayed in the attached screen grab of 4.0.1.51.

Little refactoring in the middle of the night hehe 😀

Ver 4.0.1.52 - Fix uRADMonitor Local

[brientim]

Little refactoring in the middle of the night hehe 😀

Ver 4.0.1.52 - Fix uRADMonitor Local

I know and appreciate that you put some very long hours and go way onto the nights working on developing, enhancing and all your improving all your apps.. Thanks Alex.

[brientim]

Hello Alex,

Can you please look at Air Quality VOC it is pulling no data.

Tim

[alexbk66]

Hello Alex,

Can you please look at Air Quality VOC it is pulling no data.

Tim

Hi Tim, do you mean Local or Remote, or both?

Can you also please post json or any related log.

[EDIT]

Ok, I guess you mean your Local A3 and the json is in PM, correct?

[brientim]

Hi Tim, do you mean Local or Remote, or both?

Can you also please post json or any related log.

[EDIT]

Ok, I guess you mean your Local A3 and the json is in PM, correct?

Hi Alex,

It is both, and I have enable verbose logging (trace) the the VOC (remote) is recorded avg_voc and voc: VOC Ohm is not correct. The local api call with trace enable does not record anything other that the API call.

10/24/2021 18:47:15 AK Weather Info [7774] UradMonitor Remote: (uRADMonitor) [B]avg_voc: 3758382[/B]
10/24/2021 18:47:16 AK Weather Info [7774] UradMonitor Remote: (uRADMonitor) voc: VOC Ohm

{"data":{ "id":"8200000C","type":"8","detector":"SI29BG","voltage":380 ,"cpm":12,"temperature":29.40,"humidity":21.81,"pressure":10 1831,"voc":3760385,"co2":401,"noise":70,"ch2o":0.03,"pm25":0 ,"uptime": 1231569}}

[alexbk66]

Yeah, I noticed from json from your PM the VOC value is high, but you reckon it's wrong?

[brientim]

Yeah, I noticed from json from your PM the VOC value is high, but you reckon it's wrong?

They are currently not recording any response/value from AK Weather.air_quality_VOC and the value should be represented as response VOC/1,000,000 µg/m³
10/24/2021 18:47:16 AK Weather Info [7774] UradMonitor Remote: (uRADMonitor) voc: VOC Ohm

Tim