Announcement

Collapse
No announcement yet.

HS4 4.2.18.25 is ready for Beta testing!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rjh
    replied
    I have posted build 4.2.18.28 which fixes a memory leak that was causing pages to load slowly.

    HS4 4.2.18.28 is ready for Beta testing! - HomeSeer Message Board

    Leave a comment:


  • rjh
    replied
    I have this fixed, will post an update shortly, debugging another issue.

    Originally posted by twinch View Post

    Likewise. I'll go back to 4.2.18.5 until it's stable.

    Leave a comment:


  • twinch
    replied
    Originally posted by avpman View Post
    Devices page takes forever to load here.
    Likewise. I'll go back to 4.2.18.5 until it's stable.

    Leave a comment:


  • Paul32
    replied
    Same here, device page loading time is much to long.

    rjh On the events page: the new option "Referencing Device(s)" is not searching in triggers, is that supposed to be so?

    Leave a comment:


  • avpman
    replied
    Devices page takes forever to load here.

    Leave a comment:


  • pistacheL0
    replied
    Same here on the devixes pages

    Leave a comment:


  • RGMessick
    replied
    Originally posted by Bigstevep View Post
    I'm having an issue with 4.2.18.25. When I launch the browser (Chrome,Firefox, etc.) and select devices it just spins and never loads. If I use Jon00 tools Device Management it loads right away. I don't know what is causing this. I'll play a little more (it was fine before this update) then I'll have to roll back to my backup as HS won't run this way. I'm running Windows 11 HS4.Any Ideas??
    I'm having the same issue. Had to restart several times since installing 4.2.18.25. Not sure if this is related, but today I noticed all (but a few) devices now have the same room location. Also the room list is missing the last 4 or so rooms. I have not added, removed, or edited rooms in forever. I'm not sure what the names of the missing rooms are exactly, is there a file/list on windows 11 some where. I have daily partial backups and weekly full backups.

    Leave a comment:


  • Bigstevep
    replied
    Well I spoke too soon. Major issues even my 4.2.18.21 doesn't like me. I can't install from the backup as it stays there then V.25 gave me this error:

    6/21/2023 9:05:41 AM
    Exception of type 'System.OutOfMemoryException' was thrown.
    HomeSeer version: 4.2.18.25
    Source: Scheduler
    Target: Void .ctor()
    Stack trace:
    at Scheduler.StateObject..ctor()
    at HSCore.Web_Server.AcceptCallback(IAsyncResult ar)
    at System.Net.LazyAsyncResult.Complete(IntPtr userToken)
    at System.Net.ContextAwareResult.CompleteCallback(Object state)
    at System.Threading.ExecutionContext.RunInternal(ExecutionConte xt executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Net.ContextAwareResult.Complete(IntPtr userToken)
    at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
    at System.Net.Sockets.Socket.AcceptCallback(Object nullState)
    at System.Net.Sockets.Socket.RegisteredWaitCallback(Object state, Boolean timedOut)
    at System.Threading._ThreadPoolWaitOrTimerCallback.PerformWaitO rTimerCallback(Object state, Boolean timedOut)

    Please specify what you were doing at the time of this error:

    I wasn't doing anything at the time of the error!

    I have to uninstall HS4 and re-install V.21 and then restore the installation from a backup I guess.

    Leave a comment:


  • racerfern
    replied
    This version was compiled by David Clayotn-Thomas. Back to 4.2.18.21

    Leave a comment:


  • Bigstevep
    replied
    Originally posted by logman View Post

    I just had the same issue too... Had to restart HS4 to clear it up. Seems to be an issue with the device filter (room/floor) toolbar. Mine was acting flaky each time I changed the filter to a different room before it finally hung and gave me the spinning circle.

    A couple of weird things I noticed before it hung up:
    • You could deselect a room, select a different room, hit save and the selection popup window would close as normal.. BUT it would still be filtered by the previous selection. After a WTF and another try it would usually work.
    • When enabling bulk edit, occasionally the bulk edit button would move to the left side of the screen while bulk edit was active and the filter buttons would disappear, and then move back to the right side when deactivated and the filters would come back.
    • A couple of times when I activated bulk edit, that entire row of buttons/controls disappeared (Floor, Room, Category, Search Field, etc.). Had to Ctrl F5 (force ignore cache) to get them to reappear.
    Shortly afterward I got the spinning disk on a reload and Ctrl F5 wouldn't fix it that time.

    The bright side is that it seemed like bulk edit was fixed.

    FWIW,

    --Barry
    It happened to me again. The only way for me to clear the dreaded spinning wheel was to reboot HS4, once I did all worked again. Prior to reboot I could replicate all the same symptoms I quoted Barry on. I rolled back to 4.2.18.21 and everything is back to normal.

    Leave a comment:


  • logman
    replied
    Originally posted by Bigstevep View Post
    Well I've reloaded (shut down and restarted, again) and it was the same. I shutdown again re-booted the PC and it loaded, seems OK. We'll see if it holds. Thanks Randy!
    I just had the same issue too... Had to restart HS4 to clear it up. Seems to be an issue with the device filter (room/floor) toolbar. Mine was acting flaky each time I changed the filter to a different room before it finally hung and gave me the spinning circle.

    A couple of weird things I noticed before it hung up:
    • You could deselect a room, select a different room, hit save and the selection popup window would close as normal.. BUT it would still be filtered by the previous selection. After a WTF and another try it would usually work.
    • When enabling bulk edit, occasionally the bulk edit button would move to the left side of the screen while bulk edit was active and the filter buttons would disappear, and then move back to the right side when deactivated and the filters would come back.
    • A couple of times when I activated bulk edit, that entire row of buttons/controls disappeared (Floor, Room, Category, Search Field, etc.). Had to Ctrl F5 (force ignore cache) to get them to reappear.
    Shortly afterward I got the spinning disk on a reload and Ctrl F5 wouldn't fix it that time.

    The bright side is that it seemed like bulk edit was fixed.

    FWIW,

    --Barry

    Leave a comment:


  • Bob_Linux_User
    replied
    I tried upgrading from the latest production release 4.2.18.5 to the .25 Beta and received many errors on my event actions. The last part of the error message is "type error action type NOT supported selected network ". I am running Windows 11 version of HS4 with the latest ZWave release. The errors were all listed as ZWave errors. I reverted back to 4.2.18.5.

    Leave a comment:


  • Bigstevep
    replied
    Well I've reloaded (shut down and restarted, again) and it was the same. I shutdown again re-booted the PC and it loaded, seems OK. We'll see if it holds. Thanks Randy!

    Leave a comment:


  • randy
    replied
    Originally posted by Bigstevep View Post
    I'm having an issue with 4.2.18.25. When I launch the browser (Chrome,Firefox, etc.) and select devices it just spins and never loads. If I use Jon00 tools Device Management it loads right away. I don't know what is causing this. I'll play a little more (it was fine before this update) then I'll have to roll back to my backup as HS won't run this way. I'm running Windows 11 HS4.Any Ideas??
    Mine did that yesterday still running 4.2.18.21. A restart of HS cured it and it has not occurred again. Loading .25 now.

    EDIT: 4.2.18.25 loaded and working fine.

    Leave a comment:


  • Bigstevep
    replied
    I'm having an issue with 4.2.18.25. When I launch the browser (Chrome,Firefox, etc.) and select devices it just spins and never loads. If I use Jon00 tools Device Management it loads right away. I don't know what is causing this. I'll play a little more (it was fine before this update) then I'll have to roll back to my backup as HS won't run this way. I'm running Windows 11 HS4.Any Ideas??

    Leave a comment:

Working...
X