Announcement

Collapse
No announcement yet.

To Automate or Not to Automate....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • To Automate or Not to Automate....

    I have a 25yo 4 zone Rainbird mechanical sprinkler controller. The thing is rock solid. Set and forget. Turn it off in the late Fall and Turn it on in the early Spring. Works like a champ. HOWEVER..... The house is now more of a second home. Many miles away. Droughts are causing the city to come up with creative watering schedules that seem to be changing weekly. Trying not to bother the neighbors to turn off the water. SO....

    Looking for something similar that I can turn off myself remotely. Would rather not have something that needs the internet to run local control (like Alexa...) but rather WiFi or Ethernet to the home network. Homeseer control would be cool down the road, but not a requirement.

    Who has what and which system do you like best??

    Thanks!

    Rob
    .

  • #2
    I made my own and use Z-Wave to kick on the MAIN valve. Then the 24VAC powers up a relay board I got on E-Bay. Lastly, I use DTR and the other single control pin on 25pin serial ports to toggle a relay that was designed to hook into an Arduino (also from Flea-bay). The relays on the board act like pressing the button on the remote that came with the unit. To confirm that everything is working, I have cameras around the house, which I access through VPN and either HSTouch or direct access using IPCamViewer...most of the time it is HSTouch.

    Lastly, the software, in HS, as I recall, I only had to open the port to toggle the pin. If I closed the port everything went to a safe state (maybe I only used 1 of the flow control pins? I can't recall, it has been a while).

    A bit of hardware hacking, but it all worked.


    *note, the DTR and D?? pins can swing like all RS-232, so can be 5-14V and positive or negative voltage...so anyone who wants to do something similar needs to put a diode in series with the pin and thus hook it into the drive circuit that way.

    **note 2, the relay board I found had optical transistors driving the relays with all inductive kickback circuitry placed on the board. Was really nice...as noted above, I only had to add a diode because of HOW I was driving it.
    Tasker, to a person who does Homeautomation...is like walking up to a Crack Treatment facility with a truck full of 3lb bags of crack. Then for each person that walks in and out smack them in the face with an open bag.

    Comment


    • #3
      I'm using Open Sprinkler. It will run without an internet connection, but needs internet for remote control and weather control(optional).

      It has worked well here in Texas for last two years.

      Comment


      • #4
        Here running mcsSprinklers on a Seagate Dockstar. Today you could run it on a RPi-1-2-3.

        It is running without Homeseer. You can though manage it remotely or even use Homeseer to manage it remotely if you wanted to.

        Add a cheap weather station and Cumulus software; it would run itself will little user or no user interaction.

        Here removed the old Rainbird ESP boards and replaced them with two Rain8Net serial devices and one Dockstar inside of the old Rainbird box.

        I have another irrigation set up with a Rainbird ESP board and it's been fine now for 16 years. Only issue is lightning strikes which burn up fuse; easy replacement.

        Lightning strike has taken out my two Rain8Nets before.
        Last edited by Pete; August 27th, 2016, 12:34 PM.
        - Pete

        Auto mator
        Homeseer 3 Pro - 3.0.0.534 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU - Mono 6.4X
        Homeseer Zee2 (Lite) - 3.0.0.534 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro - Mono 6.4X

        X10, UPB, Zigbee, ZWave and Wifi MQTT automation.

        Comment


        • #5
          I had a Rainbird but it went flaky on me so I bought an OpenSprinkler.

          It's been running solid for a week now.
          Michael

          HS3 Pro 3.0.0.470 | 849 devices | 349 events | OpenSprinkler | BLShutdown | EasyTrigger | NetCAM | Harmony Hub | Sonos | SDJ-Health | BLUPS | PHLocation | BLBackup | BLLock | Z-Wave 3.0.1.243 | weatherXML | Pushover 3P | Blue-Iris | AirPlaySpeak

          Comment

          Working...
          X