Michael,
I am running HS 3.0.0.435 (Windows) and mcsSprinklers 2.18.3.2 with two EtherRain8 rev C units. I am unable to operate two valves simultaneously with HS.
When I run the QuickSmart utility, I can operate 2 valves simultaneously using their direct valve control. Both valves are on the same EtherRain box.
I am manually turning on each valve from the device list in HS. When I turn on the second valve, I get this error in the HS log:
I will send you the debug log file. The first valve is turned on at 8:27:24 AM. The second valve is turned on at 8:27:41 AM. The first valve is on one EtherRain box and the second valve is on the second EtherRain box for the debug case that I captured.
I am running HS 3.0.0.435 (Windows) and mcsSprinklers 2.18.3.2 with two EtherRain8 rev C units. I am unable to operate two valves simultaneously with HS.
When I run the QuickSmart utility, I can operate 2 valves simultaneously using their direct valve control. Both valves are on the same EtherRain box.
I am manually turning on each valve from the device list in HS. When I turn on the second valve, I get this error in the HS log:
mcsSprinklers | ProcessEtherResponse{0) Conversion from string "" to type 'Double' is not valid. |
Comment