Hi Michael,
I'm running mcsSprinklers Pro v2.19.2.0 on HS3 v3.0.0.531 and just installed a GoControl WI15VZ-1. HS3 and mcsSprinklers communicates just fine with the device and I'm able to manually turn on and off all 4 of my valves.
I have 3 areas setup:
Area 1 has 2 valves [GOC 1 Valve 1] and [GOC 1 Valve 2] and is programmed to run for 5 minutes, one after the other, once every 3 days at 06:00
Area 2 has 1 valve [GOC 1 Valve 3] and is programmed to run twice every day for 5 minutes at 07:00 and 19:00.
Area 3 has 1 valve [GOC1 Valve 4] and is programmed to run four times once a week for 59 minutes each beginning at 00:00 on Monday.
My issues is this:
The first valve of Area 1 [GOC 1 Valve 1] turns on as expected and then turns off after 5 minutes. One minute later the same valve turns on for another 5 minutes and then turns off again. This sequence is repeated continuously until I manually shut down mcsSprinklers. It never advances to the second valve [GOC 1 Valve 2]. I found this out the hard way this morning when my lawn over-watered and had water flowing out my side yard and down the driveway.
I'm attaching some of my configuration screens, mcsSprinklers.ini and a snippet of the HS3 log showing the valves being controlled.
Any thoughts on what might be going on here and what the fix may be?
Thanks in advance,
Craig
I'm running mcsSprinklers Pro v2.19.2.0 on HS3 v3.0.0.531 and just installed a GoControl WI15VZ-1. HS3 and mcsSprinklers communicates just fine with the device and I'm able to manually turn on and off all 4 of my valves.
I have 3 areas setup:
Area 1 has 2 valves [GOC 1 Valve 1] and [GOC 1 Valve 2] and is programmed to run for 5 minutes, one after the other, once every 3 days at 06:00
Area 2 has 1 valve [GOC 1 Valve 3] and is programmed to run twice every day for 5 minutes at 07:00 and 19:00.
Area 3 has 1 valve [GOC1 Valve 4] and is programmed to run four times once a week for 59 minutes each beginning at 00:00 on Monday.
My issues is this:
The first valve of Area 1 [GOC 1 Valve 1] turns on as expected and then turns off after 5 minutes. One minute later the same valve turns on for another 5 minutes and then turns off again. This sequence is repeated continuously until I manually shut down mcsSprinklers. It never advances to the second valve [GOC 1 Valve 2]. I found this out the hard way this morning when my lawn over-watered and had water flowing out my side yard and down the driveway.
I'm attaching some of my configuration screens, mcsSprinklers.ini and a snippet of the HS3 log showing the valves being controlled.
Any thoughts on what might be going on here and what the fix may be?
Thanks in advance,
Craig
Comment