Announcement

Collapse
No announcement yet.

Bluetooth Connector V2.45.2.2 + Bluetooth Client posted

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • stipus
    replied
    A new version of the plugin has been posted here:

    http://board.homeseer.com/showthread.php?t=130876

    Best regards,

    stipus

    Leave a comment:


  • stipus
    replied
    Yes it's possible.

    Leave a comment:


  • maverick
    replied
    Hi Stipus

    Will it be possible to have the plugin running on a machine without bluetooth and only use the client on different other blutooth enabled machines?

    Thanks,

    Mav

    Leave a comment:


  • drozwood90
    replied
    Good thoughts...

    I would imagine that upon "boot" of the Vm, it would need to know HOW to grab that particular device.

    --Dan

    Leave a comment:


  • stipus
    replied
    I never tried this, but I think it's a good idea.

    If you can have one bluetooth dongle available in each virtual machine, it should work.

    However, I'm not sure if you can have one virtual machine with only the first dongle available, and a second virtual machine with only the second dongle available.

    Because I think the Bluetooth library would only catch the first dongle found on the virtual machine.

    Leave a comment:


  • drozwood90
    replied
    Stipus,

    I was thinking...IF I can find a virtual machine (VMWare, or the Microsoft version) which will allow me to use USB...do you think that I should be able to use two USB dongles on ONE PC?

    As, your software would need to be installed on BOTH machines (the server and as many clients as I have dongles for).

    If this is the case, and I can get it working well, is there a specific version of your BT Connector that you think I should be using?

    Or just get whatever is the latest from the Updater?

    Keep in mind, my walls for my new home will be going up next Tuesday...so I am also open for OTHERS to try this as well!

    Telefragger, that means you!! (as I know you already are using VM software).

    --Dan

    Leave a comment:


  • stipus
    replied
    I really don't understand how a different plugin version could have changed the bluetooth signal strength.

    Are you sure you didn't move the Bluetooth dongle or put a new device close to the dongle that may interfere with the signal ?

    However, to remove the plugin:

    - Disable the plugin in HomeSeer / Setup / Interfaces
    - Shutdown homeseer
    - Remove HomeSeer 2\hspi_bt.dll
    - Remove HomeSeer 2\Franson.bluetools.dll
    - Remove HomeSeer 2\Bluetools*.dll (3 files)
    - Remove HomeSeer 2\html\hspi_bt (whole directory)
    - Remove HomeSeer 2\html\BIN\hspi_bt.dll

    You may also want to remove HomeSeer 2\config\hspi_bt.ini and .lf

    Leave a comment:


  • pgmp
    replied
    Stipus, I don't remember that I installed a new set of Bluetools dlls from the forum.

    Let me add that I'm using a HomeTroller and when you install something in the operating system, you need to force the writing in the drive C: where the OS is protected, and I remembered that your bluetooth plug-in didn't work the first time I upgraded it and I should re-installed the plug-in, forced the writing and rebooted, and after worked ok but with the problem in the signal strength.

    So, IMHO, your plug-in may be installed something in the operating system and modified the signal strength... I remembered in this post that you mentioned something about the use of a new set of libraries to build this new plug-in.

    I'm wondering if I un-install everything from my HT, including your plug-in, and after re-install everything, including the previous version of your plug-in, it could work ok.

    Would you explain me how to un-install your plug-in from my HomeTroller?


    Thanks in Advance, Pablo

    Leave a comment:


  • stipus
    replied
    Do you remember if after downloading V2.44.2.2 (last time when it worked), you also downloaded and installed a new set of Bluetools dlls from the forum ?

    Leave a comment:


  • pgmp
    replied
    Stipus, I don't have the file hspi_im.dll in any of the indicated directories...

    If the correct file is "hspi_bt.dll", I have the same in both directories...

    Any other idea?...


    Thanks in Advance, Pablo

    Leave a comment:


  • stipus
    replied
    There is nothing to register.

    If you are getting an error while you are in the web configuration interface, try to see if the file hspi_im.dll in HomeSeer 2\html\bin is not outdated.

    Copy the file from the HomeSeer 2 directory to html/bin (with HS shutdown)

    Leave a comment:


  • pgmp
    replied
    Stipus, I have downloaded and installed the file following your instructions, however the behavior is similar to the new version and no the previous one.

    I have a HomeTroller and I don't know if I need to follow some special procedure to register the dll libraries or not... Your procedure doesn't indicate anything about to register the libraries... It seems to be using the dlls of the new version instead of the last downloaded.

    Thoughts?


    Thanks in Advance, Pablo

    Leave a comment:


  • stipus
    replied
    I tried to attach the file but it's too big (907KB ... forum only allows 868KB).

    Can you PM me your email address, and I'll send you the ZIP file.

    Leave a comment:


  • pgmp
    replied
    Stipus,

    The previous version was 2.44.2.2 according to the directories under D:\Program Files\HomeSeer 2\Updates2

    Would you explain me how to restore that version?

    Thanks in Advance, Pablo.

    Leave a comment:


  • stipus
    replied
    Do you remember which version you had before ?

    Anyone else with a similar behavior ?
    Last edited by stipus; February 14, 2008, 07:15 PM.

    Leave a comment:

Working...
X