DSC 4401 Faults

[kyleohme]

I have been fighting this for some time now (day one) ...

I have a DSC 4401
I have it set to 4800 baud
polling set to 2000

I had an event created that when i put my system into arm it would run a check for a virtual vacation mode. I could get it to function - however based on the below it would get stuck in a loop over and over every 2000 seconds re-running the loop resulting in tstat changing, IM's getting sent to me and so on.

It seems like it cant communicate all that well with the panel. I have looked at about everything that i could find ... hence the change to 2000 as an example

In addition i never see that any zones come back to a proper state and im showing command errors

Has anyone had any success getting this to work?


The below happens every 2000 sec

7/18/2012 2:23:24 PM DSC DEBUG Sending command to panel...
7/18/2012 2:23:24 PM DSC DEBUG Send Data: 00191
7/18/2012 2:23:24 PM DSC DEBUG Processing command: Command_Acknowlege->50000126
7/18/2012 2:23:24 PM DSC DEBUG Command Acknowledge: Last Command Received: 001
7/18/2012 2:23:25 PM DSC DEBUG Processing command: Zone_Restoral->60200129
7/18/2012 2:23:25 PM DSC Security Zone Alarm Restoral: 1
7/18/2012 2:23:25 PM DSC DEBUG Processing command: Partition_Ready->6501CC
7/18/2012 2:23:25 PM DSC Security Partition Ready: 1
7/18/2012 2:23:26 PM DSC DEBUG Processing command: Zone_Restoral->6020022A
7/18/2012 2:23:26 PM DSC Security Zone Alarm Restoral: 2
7/18/2012 2:23:27 PM DSC DEBUG Processing command: Zone_Restoral->6020032B
7/18/2012 2:23:27 PM DSC Security Zone Alarm Restoral: 3
7/18/2012 2:23:27 PM DSC DEBUG Processing command: Zone_Restoral->6020042C
7/18/2012 2:23:27 PM DSC Security Zone Alarm Restoral: 4
7/18/2012 2:23:28 PM DSC DEBUG Processing command: Zone_Restoral->6020052D
7/18/2012 2:23:28 PM DSC Security Zone Alarm Restoral: 5
7/18/2012 2:23:29 PM DSC DEBUG Processing command: Zone_Restoral->6020062E
7/18/2012 2:23:29 PM DSC Security Zone Alarm Restoral: 6
7/18/2012 2:23:30 PM DSC DEBUG Processing command: Zone_Restoral->6020072F
7/18/2012 2:23:30 PM DSC Security Zone Alarm Restoral: 7
7/18/2012 2:23:30 PM DSC DEBUG Processing command: Zone_Restoral->60200830
7/18/2012 2:23:30 PM DSC Security Zone Alarm Restoral: 8
7/18/2012 2:23:31 PM DSC DEBUG Processing command: Zone_Restoral->60201029
7/18/2012 2:23:31 PM DSC Security Zone Alarm Restoral: 10
7/18/2012 2:23:32 PM DSC DEBUG Processing command: Zone_Restoral->6020112A
7/18/2012 2:23:32 PM DSC Security Zone Alarm Restoral: 11
7/18/2012 2:23:33 PM DSC DEBUG Processing command: Zone_Restoral->6020122B
7/18/2012 2:23:33 PM DSC Security Zone Alarm Restoral: 12
7/18/2012 2:23:33 PM DSC DEBUG Processing command: Zone_Restoral->6020132C
7/18/2012 2:23:33 PM DSC Security Zone Alarm Restoral: 13
7/18/2012 2:23:34 PM DSC DEBUG Processing command: Zone_Restoral->6020142D
7/18/2012 2:23:34 PM DSC Security Zone Alarm Restoral: 14
7/18/2012 2:23:35 PM DSC DEBUG Processing command: Zone_Restoral->6020152E
7/18/2012 2:23:35 PM DSC Security Zone Alarm Restoral: 15
7/18/2012 2:23:35 PM DSC DEBUG Processing command: Zone_Restoral->6020162F
7/18/2012 2:23:35 PM DSC Security Zone Alarm Restoral: 16
7/18/2012 2:23:36 PM DSC DEBUG Processing command: Zone_Restoral->60201730
7/18/2012 2:23:36 PM DSC Security Zone Alarm Restoral: 17

[Rupp]

I believe this plugin only works with the it100 now.

[kyleohme]

So i wonder when that happened ...

2 months ago i purchased HS Pro because i was told that the plugin was fixed about 7-8 months ago and i should try it again ... it seemed like it was working and i went ahead and purchased the pro version basically for ability to manage from my keypad. I thought i was safe as in the configuration of the plugin it shows the model number of my panel.

Additionally i have gone through two cards for the panel following what information i have been able to find for this plugin.

I am frustrated with this process of not knowing what is supported - the fact that it changes and so on ... it has not been a cheap endeavor so far.

How do i know for sure?

Thanks for the quick response Rupp