Announcement

Collapse
No announcement yet.

Just noticed SIP connector not connecting

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Just noticed SIP connector not connecting

    I just noticed that my SIP connector is not connecting to my PBX. Nothing has changed in my configuration except that I do run regular updates on my Asterisk PBX. Here are the messages from my homeseer log below. Any ideas on what I have done to create this situation? Thanks.

    PHP Code:
    9/1/2014 12:10:12 PM      Error      Error loading line list from config file !Exception of type 'Stipus.sipXtapi.sipxException' was thrown
     
    9/1/2014 12:10:12 PM      sip#Homeseer      Error: Timeout Registering line ! 
     
    9/1/2014 12:10:09 PM      sip#Homeseer      Registering Homeseer Connector <sip:simon@192.168.2.170>. LocalContactId=2 
     
    9/1/2014 12:10:09 PM      sip Connector      ContactId=2 Type=Local TransportType=tcp Interface={52C296BB-A930-4504-A450-C41634E6D5BBIp=192.168.2.250 Port=5060 
     9
    /1/2014 12:10:09 PM      sip Connector      ReInitializing sipxTapiPrimary identityTcpPort=5060 UdpPort=5060 TlsPort=5061 RtpPortStart=10001 BindAddress=0.0.0.0 UseSequentialPorts=False 
     9
    /1/2014 12:09:57 PM      Error      Error loading line list from config file !Exception of type 'Stipus.sipXtapi.sipxException' was thrown
     
    9/1/2014 12:09:57 PM      sip#Homeseer      Error: Timeout Registering line ! 
     
    9/1/2014 12:09:54 PM      sip#Homeseer      Registering Homeseer Connector <sip:simon@192.168.2.170>. LocalContactId=2 
     
    9/1/2014 12:09:54 PM      sip Connector      ContactId=2 Type=Local TransportType=tcp Interface={52C296BB-A930-4504-A450-C41634E6D5BBIp=192.168.2.250 Port=5060 
     9
    /1/2014 12:09:54 PM      sip Connector      ReInitializing sipxTapiPrimary identityTcpPort=5060 UdpPort=5060 TlsPort=5061 RtpPortStart=10001 BindAddress=0.0.0.0 UseSequentialPorts=False 

    #2
    It looks like there is a problem with the SIP Connector configuration, as the primary identity is empty.

    From your log: Primary identity=

    Please double-check the parameters for your line.
    --
    stipus

    Comment


      #3
      Bear with me here as I set this up a while ago and I have no recollection of what I did. What I do know is that I haven't changed the parameters since I set it up - I haven't gone through the logs to see when it stopped working so I don't know how long that has been.

      As you note I do not have any setting in Primary Identity. I don't recall that I ever had anything in there - what should be there? Thanks.

      Comment


        #4
        Can you send your config file (without passwords) to stipus at stipus dot com ?
        --
        stipus

        Comment


          #5
          Error: Timeout Registering line !

          Since a few month I have a problem to connect to my Voipbuster sipaccount. In Homeseer (HSPRO2 v 2.5.0.81) I get also "Error: Timeout Registering line !" (see part of my log).
          For years it was ok, I can't figure out what causes this.
          I did not change the Sipconnector settings before this happened.

          (I have Homeseer 3 pro installed but not using it, checked also my password on voipbuster).
          Could you help me?
          Attached Files

          Comment


            #6
            Can you set the maximum debug setting, and send your log (without password) to stipus at stipus dot com
            --
            stipus

            Comment

            Working...
            X