Still having pronlems with Flags
I have reloaded stargate plugin, so I should have the latest plugin. Stargate winevn is version 4.00, and the firmware on stargate is 4.0 as well. I think you have solved 95% of the issues with these flags but what I am trying to do is causing setIO errors and the change is not being recieved on SG.
I am watching the DSC alarm from HS and looking for a change in status for each door, if there is a change I am trying to set a flag on SG (to reduce x10 traffic) that recognizes the door open. I get the following on the log and the flag does not get set.
<TABLE cellSpacing=2 cellPadding=0 width="100%" border=0><TBODY><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Front Door is not secure</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Event Trigger "Trigger Front door open"</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType0 align=left colSpan=3>JDS StarGate </TD><TD class=LOGEntry0 align=left colSpan=8>Error in SetIO, Conversion from string "%" to type 'Double' is not valid.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Device: Door Sensor Flag JDS Front DR Snsr (%8) ON</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Partition 1 not ready s = 6511CD</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType1 align=left colSpan=3>Database Item </TD><TD class=LOGEntry1 align=left colSpan=8>Saving Device DSC Partition 1 Status</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Front Door is secure</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Event Trigger "Trigger Front door Closed"</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType0 align=left colSpan=3>JDS StarGate </TD><TD class=LOGEntry0 align=left colSpan=8>Error in SetIO, Conversion from string "%" to type 'Double' is not valid.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Device: Door Sensor Flag JDS Front DR Snsr (%8) OFF</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Partition 1 ready s = 6501CC</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType1 align=left colSpan=3>Database Item </TD><TD class=LOGEntry1 align=left colSpan=8>Saving Device DSC Partition 1 Status</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Front Door is not secure</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Event Trigger "Trigger Front door open"</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType0 align=left colSpan=3>Info </TD><TD class=LOGEntry0 align=left colSpan=8>Device: Door Sensor Flag JDS Front DR Snsr (%8) ON</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType1 align=left colSpan=3>JDS StarGate </TD><TD class=LOGEntry1 align=left colSpan=8>Error in SetIO, Conversion from string "%" to type 'Double' is not valid.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Partition 1 not ready s = 6511CD</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType1 align=left colSpan=3>Database Item </TD><TD class=LOGEntry1 align=left colSpan=8>Saving Device DSC Partition 1 Status</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:59 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Front Door is secure</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:59 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Event Trigger "Trigger Front door Closed"</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:59 AM </TD><TD class=LOGType0 align=left colSpan=3>Info </TD><TD class=LOGEntry0 align=left colSpan=8>Device: Door Sensor Flag JDS Front DR Snsr (%8) OFF</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:59 AM </TD><TD class=LOGType1 align=left colSpan=3>JDS StarGate </TD><TD class=LOGEntry1 align=left colSpan=8>Error in SetIO, Conversion from string "%" to type 'Double' is not valid.</TD></TR></TBODY></TABLE>
It appears that my flags work well when changed in SG then echoed to HS but the opposite is not true
Thanks for any light you can shed on this
Juan
I have reloaded stargate plugin, so I should have the latest plugin. Stargate winevn is version 4.00, and the firmware on stargate is 4.0 as well. I think you have solved 95% of the issues with these flags but what I am trying to do is causing setIO errors and the change is not being recieved on SG.
I am watching the DSC alarm from HS and looking for a change in status for each door, if there is a change I am trying to set a flag on SG (to reduce x10 traffic) that recognizes the door open. I get the following on the log and the flag does not get set.
<TABLE cellSpacing=2 cellPadding=0 width="100%" border=0><TBODY><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Front Door is not secure</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Event Trigger "Trigger Front door open"</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType0 align=left colSpan=3>JDS StarGate </TD><TD class=LOGEntry0 align=left colSpan=8>Error in SetIO, Conversion from string "%" to type 'Double' is not valid.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Device: Door Sensor Flag JDS Front DR Snsr (%8) ON</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Partition 1 not ready s = 6511CD</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:45 AM </TD><TD class=LOGType1 align=left colSpan=3>Database Item </TD><TD class=LOGEntry1 align=left colSpan=8>Saving Device DSC Partition 1 Status</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Front Door is secure</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Event Trigger "Trigger Front door Closed"</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType0 align=left colSpan=3>JDS StarGate </TD><TD class=LOGEntry0 align=left colSpan=8>Error in SetIO, Conversion from string "%" to type 'Double' is not valid.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Device: Door Sensor Flag JDS Front DR Snsr (%8) OFF</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Partition 1 ready s = 6501CC</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:50 AM </TD><TD class=LOGType1 align=left colSpan=3>Database Item </TD><TD class=LOGEntry1 align=left colSpan=8>Saving Device DSC Partition 1 Status</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Front Door is not secure</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Event Trigger "Trigger Front door open"</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType0 align=left colSpan=3>Info </TD><TD class=LOGEntry0 align=left colSpan=8>Device: Door Sensor Flag JDS Front DR Snsr (%8) ON</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType1 align=left colSpan=3>JDS StarGate </TD><TD class=LOGEntry1 align=left colSpan=8>Error in SetIO, Conversion from string "%" to type 'Double' is not valid.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Partition 1 not ready s = 6511CD</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:55 AM </TD><TD class=LOGType1 align=left colSpan=3>Database Item </TD><TD class=LOGEntry1 align=left colSpan=8>Saving Device DSC Partition 1 Status</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:59 AM </TD><TD class=LOGType0 align=left colSpan=3>DSC PANEL </TD><TD class=LOGEntry0 align=left colSpan=8>Front Door is secure</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:59 AM </TD><TD class=LOGType1 align=left colSpan=3>Info </TD><TD class=LOGEntry1 align=left colSpan=8>Event Trigger "Trigger Front door Closed"</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>8/25/2006 9:26:59 AM </TD><TD class=LOGType0 align=left colSpan=3>Info </TD><TD class=LOGEntry0 align=left colSpan=8>Device: Door Sensor Flag JDS Front DR Snsr (%8) OFF</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>8/25/2006 9:26:59 AM </TD><TD class=LOGType1 align=left colSpan=3>JDS StarGate </TD><TD class=LOGEntry1 align=left colSpan=8>Error in SetIO, Conversion from string "%" to type 'Double' is not valid.</TD></TR></TBODY></TABLE>
It appears that my flags work well when changed in SG then echoed to HS but the opposite is not true
Thanks for any light you can shed on this
Juan
Comment