Aeon Labs USB Stick not showing config buttons

[BigCol]

I have had some server issues - these seem to be resolved now. HS2 is generally behaving. However, when I'm looking on the Setup/Interfaces screen, I can not see the 'Manage' button against the Aeon interface, so am now unable to add any more devices.

pic attached.

Thanks guys
Colin

[rmasonjr]

The Z-Wave plugin is 'baked' into HS2, so there is no manage button for adding devices.
You'll want to go to Setup and you'll see the Z-Wave sections.

[BigCol]

hmm, unless I'm going crazy, when I looked at this yesterday, I had a couple of other buttons to the right of where the box for the COM port value is

[rmasonjr]

Yeah, the button that normally appears there, really just redirects you to: Tools -> Manage Z-Wave Controller. Or, you can go to: http://myip:myport/mnzw

[BigCol]

Resolved!

OK thanks - I didn't realise that.

I got an error on the URL tail you gave me, 'Z wave not started or has a problem'.

I set the Z wave controlled to None, then set it back to my controller again. now its working, and the buttons are visible

I'm a happy camper once again, thank you very much

[rmasonjr]

Cool!

Sent from my SCH-R970X using Tapatalk

[mhiles]

Similar problem! Please help.

Hello,

I'm a LONG time HS2 user. Recently added an Aeon Z-stick and a couple of Z-wave devices. When I first added the devices to the stick then put the stick into my USB port, HS2 found it fine and I could use the Manage button to optimize, etc. Now that I've had issues with my motherboard's USB ports, I had to move the stick to a port on a USB card. My Win7/64 system sees the stick as port COM10 and I changed that in HS2 and restarted it. I am getting some data from some of the Z-wave devices but not all, and as the previous poster shows, there is no Manage button in the anticipated location. Finally, upon reading this thread and trying the link to my HS2 mnzw page I get what you see in the attached file. I have tried rebooting, system shut-downs, etc. to no avail.

Anyone have any ideas why my z-stick isn't working properly anymore?

Thanks in advance,
Mike

HS2 v. 2.5.0.52
Brand new Z-stick Plus Gen5
Win7/64 system

P.S. Adding recent Log entries:
9/17/2015 3:09:33 PM Device Update Device: Basement Z-Wave Interface Child 4 Electric Meter Watts value set to 219604 (2196.04 Watts)
9/17/2015 3:09:33 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2196.04 (219604/W)
9/17/2015 3:09:30 PM Z-Wave This Z-Wave PC Controller is Type: ZW_LIB_CONTROLLER_STATIC
9/17/2015 3:09:30 PM Z-Wave Warning This Z-Wave PC Controller Library Version is: Z-Wave 3.95 (Unknown ZDK Version)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2194.17 (219417/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2200.33 (220033/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2195.82 (219582/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2197.14 (219714/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2199.12 (219912/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Electric Meter kW Hours value set to 66800 (667.996 kW Hours)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Electric Meter Watts value set to 220044 (2200.44 Watts)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2200.44 (220044/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2201.98 (220198/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2204.62 (220462/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2202.64 (220264/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2203.19 (220319/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2201.98 (220198/W)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Electric Meter kW Hours value set to 66796 (667.96 kW Hours)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Electric Meter Watts value set to 220099 (2200.99 Watts)
9/17/2015 3:09:29 PM Device Update Device: Basement Z-Wave Interface Child 4 Power value set to 2200.99 (220099/W)
9/17/2015 3:09:29 PM Z-Wave Controller firmware version: 1.0
9/17/2015 3:09:29 PM Z-Wave Controller Manufacturer: Aeon Labs, ID=0x5A, Type=0x101
9/17/2015 3:09:29 PM Z-Wave Found 6 Z-Wave nodes in interface node ID 1
9/17/2015 3:09:29 PM Z-Wave Z-Wave interface node ID: 1, Home ID: FF667364
9/17/2015 3:09:29 PM Z-Wave Z-Wave Serial API version: 5
9/17/2015 3:09:29 PM Z-Wave Getting node information from controller...
9/17/2015 3:07:39 PM Z-Wave -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
9/17/2015 3:07:39 PM Z-Wave Error (Init/Sync) Initializing Z-Wave Interface: Timeout looking for Z-Wave interface.
9/17/2015 3:07:29 PM Z-Wave Initializing Z-Wave Interface on COM port: 10 at 115K baud.
9/17/2015 3:07:29 PM Z-Wave :- :- :- :- :- :- :- :- Initializing Z-Wave Interface -: -: -: -: -: -: -: -: