Announcement

Collapse
No announcement yet.

HS3 Insteon 2413S and Global Cache

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • HS3 Insteon 2413S and Global Cache

    Is it possible to use a Global Cache iTach to create a connection to a serial PowerLink Modem that is a serial unit?

    I don't see any HS3 config settings and I cannot find any Windows drivers to just emulate a COM port with the Global Cache unit.

    Thanks.

    UPDATE

    After some digging I found a Windows client that lets you connect a Virtual Com Port via the Global Cache iTach unit. Here is the link to the driver and instructions to set it up.
    https://globalcache.zendesk.com/entr...tual-COM-port-

    I set it up and it does work. I configured the Insteon serial modem to use a standard COMx port that is attached to the iTach device that is connected to my LAN via WiFi.
    Last edited by mstrickland; December 13th, 2014, 08:06 PM. Reason: Problem Solved

  • #2
    As an FYI, if you need more than 1 com port redirected, Lantronix has a good redirector here: http://ltxfaq.custhelp.com/app/answers/detail/a_id/928. It's free and allows many com ports to be redirected. The one that Global Cache shows only does 1 port in the free version.

    Cheers
    Al
    HS 3.0.0.532: 1963 Devices 1141 Events
    Z-Wave 3.0.1.261: 122 Nodes on one Z-Net

    Comment


    • #3
      Thanks. I will keep that in mind about multiple Com ports.

      Comment

      Working...
      X