Announcement

Collapse
No announcement yet.

FIBARO FGSD-002

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FIBARO FGSD-002

    Hello

    I use the last version of HS3 : HS3 Pro Edition 3.0.0.181
    Plugin ZWave : 3.0.1.11

    I have two FGSD-002 in HS3 .

    One with firmware 3.1 , it's ok in HS3

    Full Name: Node 18 Z-Wave Fibaro Notification Sensor Node 18 Root RDC Polling: Polling Disabled
    Manufacturer:
    Fibaro System Type:
    0xC02 ID:
    0x1002 Listens:
    No Version: 3.99 (ZDK 6.51.3) Firmware: 3.1 Neighbor Count:
    7 Speed:
    40.0Kbps
    Neighbors: 1, 4, 6, 8, 11, 12, 17
    Uses Interface: Z-STICK-2 (1) Basic Type: ROUTING SLAVE, Generic Type: SENSOR NOTIFICATION, Specific Type: NOTIFICATION SENSOR
    Command Classes:
    Supported: Zwaveplus Info, Version, Manufacturer Specific, Device Reset Locally, Association Grp Info, Association, Powerlevel, Wake Up, Battery(V 1), Notification(V 5), Crc 16 Encap, Configuration, Sensor Multilevel(V 8), Multi Instance Association, Application Status(V 1), Sensor Alarm(V 1), Firmware Update Md
    Controlled: Mark, Basic, Time Parameters
    Child Device: Smoke Notification CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: Heat Notification CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: Home Security CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: Power Management Notification CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: System Notification CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: Application Status CC: Application Status Polling: Polling Disabled
    Child Device: Battery CC: Battery Polling: Polling Interval: 12h, 0m, 0s
    Child Device: General Purpose Alarm CC: Sensor Alarm Polling: Polling Interval: 20m, 22s
    Child Device: Smoke Alarm CC: Sensor Alarm Polling: Polling Interval: 20m, 24s
    Child Device: Heat Alarm CC: Sensor Alarm Polling: Polling Interval: 20m, 26s
    Child Device: Temperature CC: Sensor Multilevel Ver: 8 Polling: Polling Interval: 20m, 28s

    An another with firmware 3.2

    Full Name: Node 20 Z-Wave Fibaro Notification Sensor Node 20 Root Etage Polling: Polling Disabled
    Manufacturer:
    Fibaro System Type:
    0xC02 ID:
    0x1002 Listens:
    No Version: 4.05 (ZDK 6.51.6) Firmware: 3.2 Neighbor Count:
    7 Speed:
    40.0Kbps
    Neighbors: 1, 4, 6, 8, 11, 12, 17
    Uses Interface: Z-STICK-2 (1) Basic Type: ROUTING SLAVE, Generic Type: SENSOR NOTIFICATION, Specific Type: NOTIFICATION SENSOR
    Command Classes:
    Supported: Zwaveplus Info, Version, Manufacturer Specific, Device Reset Locally, Association Grp Info, Association, Powerlevel, Wake Up, Battery(V 1), Notification(V 5), Crc 16 Encap, Configuration, Sensor Multilevel(V 8), Multi Instance Association, Application Status(V 1), Sensor Alarm(V 1), Security, Firmware Update Md
    Controlled: Basic, Time Parameters
    Supported Secure: Basic, Device Reset Locally, Association, Wake Up, Notification(Ver 5), Configuration, Multi Instance Association, Sensor Alarm(Ver 1)
    Child Device: Smoke Notification CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: Heat Notification CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: Home Security CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: Power Management Notification CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: System Notification CC: Notification Ver: 5 Polling: Polling Disabled
    Child Device: Application Status CC: Application Status Polling: Polling Disabled
    Child Device: Battery CC: Battery Polling: Polling Interval: 12h, 0m, 0s
    Child Device: General Purpose Alarm CC: Sensor Alarm Polling: Polling Interval: 20m, 40s
    Child Device: Smoke Alarm CC: Sensor Alarm Polling: Polling Interval: 20m, 42s
    Child Device: Heat Alarm CC: Sensor Alarm Polling: Polling Interval: 20m, 44s
    Child Device: Temperature CC: Sensor Multilevel Ver: 8 Polling: Polling Interval: 20m, 46s

    Smoke sensor in version 3.1 is OK in HS3, but with firmware 3.2, i have some difficult to configure (see screen shot)

    and i have a new line in node:
    Supported Secure: Basic, Device Reset Locally, Association, Wake Up, Notification(Ver 5), Configuration, Multi Instance Association, Sensor Alarm(Ver 1)

    this line don't exist in firmware 3.1

    can you help me

    Thanks

    Jean-francois.
    Attached Files
    Last edited by jfla; May 30th, 2015, 04:54 AM.
Working...
X