Announcement
Collapse
No announcement yet.
Lots of errors
Collapse
X
-
I don't have any other devices so I can't say. In the mobile app the Floalts just have brightness and the three basic colour tones.
It isn't really a problem, and it could be the gateway queuing the changes not the plugin.
Leave a comment:
-
Originally posted by rge View PostYes, the Floalt panels - I have small 30x30 and large 90x30 panels, all work nicely.
Sometimes if the panel is turned of at the mains with the regular light switch, a queue of commands can seem to build up if you try to control them, then when you do turn them on they act a bit weird. Everything else works as expected.
What controls do they have in the mobile app, apart from brightness?
Leave a comment:
-
Yes, the Floalt panels - I have small 30x30 and large 90x30 panels, all work nicely.
Sometimes if the panel is turned of at the mains with the regular light switch, a queue of commands can seem to build up if you try to control them, then when you do turn them on they act a bit weird. Everything else works as expected.
Leave a comment:
-
Thank you. Are the icons for the square panels? Because I didn't the new panels, do they work?
Leave a comment:
-
Looking good now, functionality seems fine and no errors or warnings posted, thanks!
Also if you want some more Ikea-specific icons for the panels, I've attached what I'm using for 0,1-19,20-39,40-59,60-79,80-99,100.
Leave a comment:
-
Thanks Alex - I still get a lot of warnings like below, but I guess that's OK if the polling is working overall.
[723]: Retry: /15005/131073/196610
[723]: Request failed[] : /15005/131073/196610
Is there some way I can suppress warnings from the log? I like to keep my log fairly clean so I can see issues, and these warnings are now >95% of my log content.
Leave a comment:
-
Originally posted by rge View Post
Thanks Alex - for me it isn't super critical that everything is up-to-date, so I think I'll leave polling off for now and try it again as you do updates.
It didn't use your plugin prior to HS4 so I can't say if there's any difference.
Will install 3.0.0.42 asap, and thanks again for the support.
Not sure why HS4 caused issues - I updated all dependencies to latest versions - seems to work now.
Leave a comment:
-
Originally posted by alexbk66 View PostIn the mean time if you are sure that observation does work - you can disable polling. But personally I never trust these technologies.
And another question - before upgrading to HS4 it was working?
It didn't use your plugin prior to HS4 so I can't say if there's any difference.
Will install 3.0.0.42 asap, and thanks again for the support.
Leave a comment:
-
BTW, I published ver. 3.0.0.42 (in BETA).
And I'm looking into porting to HS4 - too much work
[EDIT]
Ver 3.0.0.43 (in BETA) seems to work. I also tested with HS4 (where I did get issues before) and it's all good.
Leave a comment:
-
Originally posted by rge View PostI started clean and still get a huge number of warnings like this:
[723]: Request failed() : /15004/131075
[723]: Retry: /15004/131075
[723]: 12:19:50 [DTLSClientChannel] Warn - Sessions are different
If I disable all polling everything seems to work OK, I don't know if this is the best option?
As I enable polling on devices, the number of warnings increases. Given the message, I wonder if the code opens multiple sessions for the polling and then mixes up the results?
I still use polling because it's most reliable - it it doesn't work (i.e. connection lost) - you see the problem straight away.
Regarding the sessions - IKEA use complicated comms protocol CoAP, internally it keeps secure session with the device. When communication timeouts for any reason (I think it's 3 seconds) - it starts a new session. But it doesn't look like it works properly. It's not in my code, its in CoAP library, but because of these issues I have to download CoAP source code to debug it.
I've seen this issue myself, but usually re-entering the Gateway code fixes the problem. I'll keep investigating...
In the mean time if you are sure that observation does work - you can disable polling. But personally I never trust these technologies.
And another question - before upgrading to HS4 it was working?
Leave a comment:
Leave a comment: