Announcement

Collapse
No announcement yet.

Insteon 2413U with MSandler Installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Insteon 2413U with MSandler Installation

    I'm not sure if this post will make it through however I need to get a procedure for installing a Insteon 2413 USB onto a HS3 HST Zee S2. I now familiar with bulletin Boards nor a real fan however it is what it is I just need this working and with only a few days left before the MS Insteon Plug In expires and I move onto Z-Wave alternatives. I would really like it to work.

    That being said after installing the PlugIn and then pluging in a 2413 USB from Insteon Store I cannot get the Zee S2 Hometroller to recognize the 2413. HELP.
    I've installed an Insteon 2413 USB on a S6 Hometroller S6 and it went rather smoothly but then again that was a Windows based system and this is and the Zee S2 I think is a Lynx based system.
    Last edited by mnsandler; March 22, 2017, 06:42 AM.

    #2
    Welcome.

    for a Linux based system, use the something like following for the Port name:

    /dev/ttyUSB0 is USB
    /dev/ttyUSB1 is USB, etc.

    You need to know which usb port the PLM is connected to.


    ps. I moved your post to a new thread, you had originally replied to the Feature Request thread.
    Mark

    HS3 Pro 3.0.0.534
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
    Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

    Comment

    Working...
    X