Announcement

Collapse
No announcement yet.

Battery Operating Devices - Not Sending Off Command

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Battery Operating Devices - Not Sending Off Command

    Hi
    i just noticed that a few devices that are battery operated ( leak sensors and motion sensors) do recognize the first command (Changed to "Motion" or "Wet") but it doesnt go back to "No Motion" or "Dry"

    i removed them both and re-added them with no change.

    i upgraded to 3.0.0.435 and Insteon plugin 3.0.6.33

    Thanks

    #2
    the motion sensor should send an Off (or no motion) message. turn on detailed logging, press the set btn, and see if its being sent but not processed by the plugin.

    the newer leak sensor does not send an Off cmd by design. you must press the set button to clear it. if you have an older one, then try the same thing i suggested for the MS.
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment

    Working...
    X