Hi I am finally re-setting up Homeseer on a laptop. I have been able to get all my Insteon lighting and fan controls working fine with your Plug-in. I have not had any luck with the Morninglinc lock controllers. I saw that the Plug-in supports the Morninglinc Lock Controller. I have tried them in both the On and Off states. They will not register. I had them working on my old setup but I was using a USB Insteon Controller. I noticed on this forum that the supported PLMs are very specific and the Portable controller is not listed. Is there anything I should try? Or have I been very lucky with all the Insteon devices I have got working.
Announcement
Collapse
No announcement yet.
Morninglinc controller & Portable USB adapter 2448A7
Collapse
This topic is closed.
X
X
-
you need to either manually link the morninglinc to the interface or via the plugin tap-add function. see the usb adapter manual for the manual procedure.
you cannot register the lock via the regular plugin process.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
-
Glad you got it working.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
Comment