For anyone following this thread, Smarthome doesn't know what the problem is; I'm converting to battery for now
the following will tell you if you are having the same problem:
Unplug the motion sensor, wait 10 secs
plug the motion sensor back into usb power
check the hs log: you should see an On message transmitted and a heartbeat message
then based on the timeout (default 30 secs), you should get an Off message transmitted (this is normal behavior)
if you don't get the Off message then you may be having the same issue.
the following will tell you if you are having the same problem:
Unplug the motion sensor, wait 10 secs
plug the motion sensor back into usb power
check the hs log: you should see an On message transmitted and a heartbeat message
then based on the timeout (default 30 secs), you should get an Off message transmitted (this is normal behavior)
if you don't get the Off message then you may be having the same issue.
Comment