Hi, I've been running HS3 with the plug-in for a few years. I recently bought a new one as the older unit failed. I was able to get it up and running pretty quickly. Shortly after, I recently migrated HS to a new Host, and have been unable to get it to connect ever since. I get the message ** Unable to communicate with the Insteon powerline interface *** and the plug-in itself is giving me the "check the interface..." message. I am able to connect to the HUBs port via a browser, even from the new Host. The log doesn't seem to be telling me much, as just seeing...
--------*Initialization Log*--------------
10/17/2019 7:58:15 AM - Host System: 192.168.1.15 (vMS1) 3.0.0.548
10/17/2019 7:58:15 AM - Plugin HSPI_Insteon.exe version: 3.0.7.1
10/17/2019 7:58:15 AM - Insteon Support library (Insteon.dll) version: 1.0.7.1
10/17/2019 7:58:15 AM - RegisterCallback Completed
10/17/2019 7:58:15 AM - Enter InitIO
10/17/2019 7:58:15 AM - Enter InitPlugin
10/17/2019 7:58:15 AM - Global initialization of plug-in required, starting up.
10/17/2019 7:58:15 AM - In ProcessRawReceiveThread
10/17/2019 7:58:15 AM - Initializing Insteon hardware interface...
10/17/2019 7:58:15 AM - Initializing Interface...
10/17/2019 7:58:15 AM - In PLMBuffer_ProcessBufferThread
10/17/2019 7:58:15 AM - Sending command 02 60 to Interface, (Expecting 6 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
10/17/2019 7:58:15 AM - Sending http://192.168.1.35:25105/1?XB=M=1
10/17/2019 7:58:15 AM - Sending http://192.168.1.35:25105/3?0260=I=3
10/17/2019 7:58:18 AM - ..did not receive a response from the Interface
10/17/2019 7:58:18 AM - ..Retry #1 required. Pausing 250ms for Interface to clear...
10/17/2019 7:58:19 AM - Sending http://192.168.1.35:25105/3?0260=I=3
10/17/2019 7:58:22 AM - ..did not receive a response from the Interface
10/17/2019 7:58:22 AM - ..Retry #2 required. Pausing 300ms for Interface to clear...
10/17/2019 7:58:22 AM - Sending http://192.168.1.35:25105/3?0260=I=3
10/17/2019 7:58:25 AM - ..did not receive a response from the Interface
10/17/2019 7:58:25 AM - Insteon hardware interface initialization failed.
10/17/2019 7:58:25 AM - Exit InitIO
-----------*Pre-Error Log*----------------
10/17/2019 7:58:25 AM - Could not contact Interface on 192.168.1.35:25105
10/17/2019 7:58:36 AM - Warning: Unable to connect to the remote server
10/17/2019 7:58:36 AM - You need to set the Interface Port on the Config page, and then restart HS.
10/17/2019 7:58:44 AM - Saved ini file. msecs=15
10/17/2019 7:58:55 AM - Submit Changes Selected
10/17/2019 7:58:55 AM - Scheduled polling enabled.
10/17/2019 7:58:58 AM - Warning: Unable to connect to the remote server
10/17/2019 7:58:58 AM - You need to set the Interface Port on the Config page, and then restart HS.
10/17/2019 7:58:59 AM - Saved ini file. msecs=0
10/17/2019 7:59:19 AM - Warning: Unable to connect to the remote server
10/17/2019 7:59:19 AM - You need to set the Interface Port on the Config page, and then restart HS.
10/17/2019 7:59:36 AM - Unable to connect to the remote server
10/17/2019 8:02:40 AM - Saved ini file. msecs=0
10/17/2019 8:03:15 AM - Saving comm stats...
10/17/2019 8:03:15 AM - ..finished saving comm stats.
10/17/2019 8:03:43 AM - Saved ini file. msecs=15
anything I'm missing or ideas? I did backup and restore HS to migrate the configuration, so unsure if that might have done something?
thanks!
--------*Initialization Log*--------------
10/17/2019 7:58:15 AM - Host System: 192.168.1.15 (vMS1) 3.0.0.548
10/17/2019 7:58:15 AM - Plugin HSPI_Insteon.exe version: 3.0.7.1
10/17/2019 7:58:15 AM - Insteon Support library (Insteon.dll) version: 1.0.7.1
10/17/2019 7:58:15 AM - RegisterCallback Completed
10/17/2019 7:58:15 AM - Enter InitIO
10/17/2019 7:58:15 AM - Enter InitPlugin
10/17/2019 7:58:15 AM - Global initialization of plug-in required, starting up.
10/17/2019 7:58:15 AM - In ProcessRawReceiveThread
10/17/2019 7:58:15 AM - Initializing Insteon hardware interface...
10/17/2019 7:58:15 AM - Initializing Interface...
10/17/2019 7:58:15 AM - In PLMBuffer_ProcessBufferThread
10/17/2019 7:58:15 AM - Sending command 02 60 to Interface, (Expecting 6 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
10/17/2019 7:58:15 AM - Sending http://192.168.1.35:25105/1?XB=M=1
10/17/2019 7:58:15 AM - Sending http://192.168.1.35:25105/3?0260=I=3
10/17/2019 7:58:18 AM - ..did not receive a response from the Interface
10/17/2019 7:58:18 AM - ..Retry #1 required. Pausing 250ms for Interface to clear...
10/17/2019 7:58:19 AM - Sending http://192.168.1.35:25105/3?0260=I=3
10/17/2019 7:58:22 AM - ..did not receive a response from the Interface
10/17/2019 7:58:22 AM - ..Retry #2 required. Pausing 300ms for Interface to clear...
10/17/2019 7:58:22 AM - Sending http://192.168.1.35:25105/3?0260=I=3
10/17/2019 7:58:25 AM - ..did not receive a response from the Interface
10/17/2019 7:58:25 AM - Insteon hardware interface initialization failed.
10/17/2019 7:58:25 AM - Exit InitIO
-----------*Pre-Error Log*----------------
10/17/2019 7:58:25 AM - Could not contact Interface on 192.168.1.35:25105
10/17/2019 7:58:36 AM - Warning: Unable to connect to the remote server
10/17/2019 7:58:36 AM - You need to set the Interface Port on the Config page, and then restart HS.
10/17/2019 7:58:44 AM - Saved ini file. msecs=15
10/17/2019 7:58:55 AM - Submit Changes Selected
10/17/2019 7:58:55 AM - Scheduled polling enabled.
10/17/2019 7:58:58 AM - Warning: Unable to connect to the remote server
10/17/2019 7:58:58 AM - You need to set the Interface Port on the Config page, and then restart HS.
10/17/2019 7:58:59 AM - Saved ini file. msecs=0
10/17/2019 7:59:19 AM - Warning: Unable to connect to the remote server
10/17/2019 7:59:19 AM - You need to set the Interface Port on the Config page, and then restart HS.
10/17/2019 7:59:36 AM - Unable to connect to the remote server
10/17/2019 8:02:40 AM - Saved ini file. msecs=0
10/17/2019 8:03:15 AM - Saving comm stats...
10/17/2019 8:03:15 AM - ..finished saving comm stats.
10/17/2019 8:03:43 AM - Saved ini file. msecs=15
anything I'm missing or ideas? I did backup and restore HS to migrate the configuration, so unsure if that might have done something?
thanks!
Comment