Announcement

Collapse
No announcement yet.

Dual-Band LampLincs Randomly Turn On / Off

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Dual-Band LampLincs Randomly Turn On / Off

    Mark having issues with lamplincs turning on/off randomly. (we had another thread where they would not link you updated plugin to fix)

    Both are same version and linked and the only 2 Lamplincs I have. I have tried to remove them and re-add but same result.

    Not sure if its relevant but when other lights are turned off and on they seem to go on/off as well also I have several occupancy sensors which may be causing the frequent on/off when they send heartbeats or motion detection (none of the sensors are set to control the LampLincs).

    Device Type: Dual-Band LampLinc
    Firmware Version: 43
    Comm Reliability: 100% (1 failed out of 374 cmds)
    Resume dim mode: False
    Default local on level: 100%

    Below logs show frequency
    Mar-24 10:33:48 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:33:48 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:32:58 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:32:56 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:31:52 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:31:50 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:27:30 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:27:28 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:25:52 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:25:50 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:25:16 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:25:15 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:24:45 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:24:43 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:24:17 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:24:15 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:23:49 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:23:47 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:23:09 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:23:09 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:22:35 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:22:35 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:21:53 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:21:51 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:21:09 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:21:07 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:20:39 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:20:37 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:20:09 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:20:07 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:19:15 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:19:13 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:18:23 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:16:55 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:16:25 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:16:25 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:15:47 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go OFF
    Mar-24 10:15:45 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Mar-24 10:15:10 AM Insteon Received Frontdoor Front Lamp (3A.47.93) Go ON
    Anyway since we have been quarantined it has gotten worse several times an hour (why I think occupancy sensors may play a role) and the wife is tired of it lol

    Let me know if you need anything.

    Thanks,
    Steven G
    Tags: None
    #2
    what do the links look like in the Frontdoor Front Lamp device within the plugin
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment

      #3

      Link #2Outlet controls Living Room Lamp Outlet (3A.5B.25)
      Link #4Outlet has local control reporting to HomeSeer
      Link #1Outlet is controlled by Living Room Lamp (3A.5B.25) - On Level: 100%, Ramp Rate: .5 Sec.
      Link #3Outlet is controlled by HomeSeer using Hub Group #0 (i2CS Registration Link) - On Level: 0%, Ramp Rate: .5 Sec.
      Link #5Outlet is controlled by HomeSeer using Hub Group #254 (HomeSeer All Devices Group) - On Level: 100%, Ramp Rate: .1 Sec.

      Thanks,
      Steven G

      Comment

        #4
        Also just noticed this in log
        Mar-24 11:23:43 AM Insteon Program Remote Record not needed for 3A.47.93 to E2014EADBA000001
        Mar-24 11:23:25 AM Insteon Trouble converting [] to integer
        Mar-24 11:20:31 AM Insteon Received Office Motion Sensor - Occupancy Sensor Occupancy Sensor: (41.65.37) Go OFF
        Mar-24 11:17:45 AM Insteon Received Office Motion Sensor - Occupancy Sensor Occupancy Sensor: (41.65.37) Go ON

        Comment

          #5
          Originally posted by steveng View Post
          Link #2Outlet controls Living Room Lamp Outlet (3A.5B.25)
          Link #4Outlet has local control reporting to HomeSeer
          Link #1Outlet is controlled by Living Room Lamp (3A.5B.25) - On Level: 100%, Ramp Rate: .5 Sec.
          Link #3Outlet is controlled by HomeSeer using Hub Group #0 (i2CS Registration Link) - On Level: 0%, Ramp Rate: .5 Sec.
          Link #5Outlet is controlled by HomeSeer using Hub Group #254 (HomeSeer All Devices Group) - On Level: 100%, Ramp Rate: .1 Sec.

          Thanks,
          Steven G
          Link #1 (the living room lamp) is controlling the Frontdoor Front Lamp. is this desired? if not, delete this link
          Mark

          HS3 Pro 4.2.19.5
          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

          Comment

            #6
            Originally posted by steveng View Post
            Also just noticed this in log
            Mar-24 11:23:43 AM Insteon Program Remote Record not needed for 3A.47.93 to E2014EADBA000001
            Mar-24 11:23:25 AM Insteon Trouble converting [] to integer
            Mar-24 11:20:31 AM Insteon Received Office Motion Sensor - Occupancy Sensor Occupancy Sensor: (41.65.37) Go OFF
            Mar-24 11:17:45 AM Insteon Received Office Motion Sensor - Occupancy Sensor Occupancy Sensor: (41.65.37) Go ON
            I think updating to the latest beta in the Updater will resolve the above error
            Mark

            HS3 Pro 4.2.19.5
            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
            Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

            Comment

              #7
              Yes it is correct when one is turned on the other should as well

              here is thread where we worked on that LINK

              Comment

                #8
                I am on version 3.0.7.18 the version available in beta is 3.0.7.1. That correct?

                Thanks,
                Steven G

                Comment

                  #9
                  Originally posted by steveng View Post
                  I am on version 3.0.7.18 the version available in beta is 3.0.7.1. That correct?

                  Thanks,
                  Steven G
                  3.0.7.1 is the current Release version.
                  3.0.7.18 is a beta, and should be fine for now.
                  Mark

                  HS3 Pro 4.2.19.5
                  Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                  Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                  Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                  Comment

                    #10
                    do you have any events that turn on the outside light based on a motion sensor?
                    Mark

                    HS3 Pro 4.2.19.5
                    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                    Comment

                      #11
                      no all motion is for indoor rooms, but was playing with the links and I removed the links from frontdoor lamp 1 by 1 and re-added and looks like it may have fixed it.

                      I will keep an eye and report back

                      Thanks,
                      Steven G

                      Comment

                        #12
                        Originally posted by steveng View Post
                        no all motion is for indoor rooms, but was playing with the links and I removed the links from frontdoor lamp 1 by 1 and re-added and looks like it may have fixed it.

                        I will keep an eye and report back

                        Thanks,
                        Steven G
                        Ok, thanks for trying that. please report back if that takes care of the issue.
                        Mark

                        HS3 Pro 4.2.19.5
                        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                        Comment

                        Previous template Next
                        Working...
                        X