i/o linc 2540 not operational

[sdetweil]

i have an i/o linc device which I use to control my house water supply.. it is connect thru ifttt to some water sensors at my water heater and washing machine.

with the builtin insteon plugin i get a device I can operate from the HS devices screen.. I see both the sensor and the relay in the advanced config for this device

is there some config i can do to enable the on/off control of this device from the hs screen? i can do it thru the insteon app

Insteon Device ID: 4A.A0.EA

Device Name: water vavle

Device Location:garage


Floor: main
Device Type: I/O Linc
Firmware Version: 41
Comm Reliability: (Not enough data)

Polling Interval (Minutes, 0=None):

Sync linked responder devices

Automatically shut Off HS device when in Momentary Mode
Disable relay polling


I/O Linc Channels

Channel	Custom Device Name
1: (Input Sensor)
2: (Output Relay)

---

Device Link Table

Link #1	Input Sensor controls Unregistered Device (39.FA.E7)
Link #6	Input Sensor has local control reporting to HomeSeer
Link #8	Input Sensor is controlled by HomeSeer using RF PLM Group #0 (i2CS Registration Link) - On Level : On
Link #7	Input Sensor is controlled by HomeSeer using RF PLM Group #1 (Button Control Group) - On Level : Off
Link #5	Input Sensor is controlled by HomeSeer using RF PLM Group #1 (Button Control Group) - On Level : On
Link #3	Input Sensor is controlled by Unregistered Device Group 0 (39.FA.E7) - On Level : Off
Link #2	Input Sensor is controlled by Unregistered Device Group 1 (39.FA.E7) - On Level : Off
Link #4	Input Sensor is controlled by Unregistered Device Group 13 (39.FA.E7) - On Level : On

Warning: This Insteon device controls or is controlled by devices you have not yet registered with the plug-in. HomeSeer may not be aware of any control commands that might come from the unregistered device. Please add the unknown device to your system if possible.

---

Custom Settings (* indicates default setting)

Closure Time

Clear Monentary 0.1 secs 0.2 secs 0.3 secs 0.4 secs 0.5 secs 0.6 secs 0.7 secs 0.8 secs 0.9 secs 1.0 secs 1.1 secs 1.2 secs 1.3 secs 1.4 secs 1.5 secs 1.6 secs 1.7 secs 1.8 secs 1.9 secs 2.0 secs 2.1 secs 2.2 secs 2.3 secs 2.4 secs 2.5 secs 2.6 secs 2.7 secs 2.8 secs 2.9 secs 3.0 secs 3.1 secs 3.2 secs 3.3 secs 3.4 secs 3.5 secs 3.6 secs 3.7 secs 3.8 secs 3.9 secs 4.0 secs 4.1 secs 4.2 secs 4.3 secs 4.4 secs 4.5 secs 4.6 secs 4.7 secs 4.8 secs 4.9 secs 5.0 secs 5.1 secs 5.2 secs 5.3 secs 5.4 secs 5.5 secs 5.6 secs 5.7 secs 5.8 secs 5.9 secs 6.0 secs 6.1 secs 6.2 secs 6.3 secs 6.4 secs 6.5 secs 6.6 secs 6.7 secs 6.8 secs 6.9 secs 7.0 secs 7.1 secs 7.2 secs 7.3 secs 7.4 secs 7.5 secs 7.6 secs 7.7 secs 7.8 secs 7.9 secs 8.0 secs 8.1 secs 8.2 secs 8.3 secs 8.4 secs 8.5 secs 8.6 secs 8.7 secs 8.8 secs 8.9 secs 9.0 secs 9.1 secs 9.2 secs 9.3 secs 9.4 secs 9.5 secs 9.6 secs 9.7 secs 9.8 secs 9.9 secs 10.0 secs 10.1 secs 10.2 secs 10.3 secs 10.4 secs 10.5 secs 10.6 secs 10.7 secs 10.8 secs 10.9 secs 11.0 secs 11.1 secs 11.2 secs 11.3 secs 11.4 secs 11.5 secs 11.6 secs 11.7 secs 11.8 secs 11.9 secs 12.0 secs 12.1 secs 12.2 secs 12.3 secs 12.4 secs 12.5 secs 12.6 secs 12.7 secs 12.8 secs 12.9 secs 13.0 secs 13.1 secs 13.2 secs 13.3 secs 13.4 secs 13.5 secs 13.6 secs 13.7 secs 13.8 secs 13.9 secs 14.0 secs 14.1 secs 14.2 secs 14.3 secs 14.4 secs 14.5 secs 14.6 secs 14.7 secs 14.8 secs 14.9 secs 15.0 secs 15.1 secs 15.2 secs 15.3 secs 15.4 secs 15.5 secs 15.6 secs 15.7 secs 15.8 secs 15.9 secs 16.0 secs 16.1 secs 16.2 secs 16.3 secs 16.4 secs 16.5 secs 16.6 secs 16.7 secs 16.8 secs 16.9 secs 17.0 secs 17.1 secs 17.2 secs 17.3 secs 17.4 secs 17.5 secs 17.6 secs 17.7 secs 17.8 secs 17.9 secs 18.0 secs 18.1 secs 18.2 secs 18.3 secs 18.4 secs 18.5 secs 18.6 secs 18.7 secs 18.8 secs 18.9 secs 19.0 secs 19.1 secs 19.2 secs 19.3 secs 19.4 secs 19.5 secs 19.6 secs 19.7 secs 19.8 secs 19.9 secs 20.0 secs 20.1 secs 20.2 secs 20.3 secs 20.4 secs 20.5 secs 20.6 secs 20.7 secs 20.8 secs 20.9 secs 21.0 secs 21.1 secs 21.2 secs 21.3 secs 21.4 secs 21.5 secs 21.6 secs 21.7 secs 21.8 secs 21.9 secs 22.0 secs 22.1 secs 22.2 secs 22.3 secs 22.4 secs 22.5 secs 22.6 secs 22.7 secs 22.8 secs 22.9 secs 23.0 secs 23.1 secs 23.2 secs 23.3 secs 23.4 secs 23.5 secs 23.6 secs 23.7 secs 23.8 secs 23.9 secs 24.0 secs 24.1 secs 24.2 secs 24.3 secs 24.4 secs 24.5 secs 24.6 secs 24.7 secs 24.8 secs 24.9 secs 25.0 secs 25.1 secs 25.2 secs 25.3 secs 25.4 secs 25.5 secs

---

Operating Flags (* indicates default setting)

I/O Linc Mode	Continuous* Momentary A Momentary B Momentary C
Relay set via Sensor Input	Disabled* Enabled
Send On Cmd	When Closed* When Opened
LED	On* Off
Beep with Set Btn	Off* On

[sdetweil]

device list

[mnsandler]

there should be on/off buttons on the relay device. and there should be a hs device for the input sensor. you may need to delete these hs devices and restart the plugin so they can be recreated

[sdetweil]

but there is no relay device in the device list, that was my point

[sdetweil]

now suddenly the relay device is there.. a day later... weird..

[mnsandler]

thanks for reporting back