Announcement

Collapse
No announcement yet.

Problem with Insteon Plugin giving error

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Problem with Insteon Plugin giving error

    My settings are correct but I keep getting the error “Unable to communicate with Insteon powerline interface”
    I keep having to restartHS4. After researching the issue I found another similar problem that seemed to be the result of a device sending ‘chatter’ causing com issues. Anyone have any thoughts?

    #2
    After a recent power outage, I moved the Insteon hub to a power strip. Perhaps there is a power line communication issue as a result. I moved it back to its original home outlet. Hopefully that solves the issue. Also, the Sonos plugin had an error so I shut it down as a precaution. Hopefully these things fix the problem, time will tell.

    Comment


      #3
      a power tap/strip should be fine, however any kind of surge protection will cause problems.
      Mark

      HS3 Pro 3.0.0.534
      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
      Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

      Comment

      Working...
      X