got it. The manage devices page has Location 2 info inside the name. thanks
Announcement
Collapse
No announcement yet.
Insteon Lighting Plug-In v1.2.3.4 for PLM & PLC
Collapse
This topic is closed.
X
X
-
Can't link 2476
Has anyone had problems linking the 2476 V4.35?
HS V 2.4.0.3
PLC V 1.2.3.4
Switch is recognized, but won't link with tap or manual. Error:
"Tap-add of SwitchLinc V2 600W Dimmer failed: The device properties could not be read. Communication failure. The device was not added."
I have attempted this with 2 of these switches. I have linked other devices.
HS Error log. (IP shows 12.45.53 - 12.45.52 marked on device)
----------------------------------------------------
1/23/2010 9:33:08 AM ~!~Insteon~!~Got a tap-add request from device 12.45.53 (SwitchLinc V2 600W Dimmer)
1/23/2010 9:33:08 AM ~!~Insteon~!~Set tap add job data : Name:Tap-Added SwitchLinc V2 600W Dimmer 0 Type:0101 Firmware:37
1/23/2010 9:33:08 AM ~!~Insteon~!~Calling DM.AddRecord for 12.45.53 1 True
1/23/2010 9:33:10 AM ~!~Insteon~!~Calling DM.AddRecord for 12.45.53 1 False
1/23/2010 9:34:23 AM ~!~Insteon~!~Tap-add mode failed to add the device at address 12.45.53 because: The device properties could not be read. Communication failure. The device was not added.
1/23/2010 9:35:14 AM ~!~Insteon~!~Got a tap-add request from device 12.45.53 (SwitchLinc V2 600W Dimmer)
1/23/2010 9:35:14 AM ~!~Insteon~!~Set tap add job data : Name:Tap-Added SwitchLinc V2 600W Dimmer 0 Type:0101 Firmware:37
1/23/2010 9:35:27 AM ~!~Insteon~!~Received _96 (Dining Room Table) Start Ramp
1/23/2010 9:35:29 AM ~!~Insteon~!~Received _96 (Dining Room Table) Stop Ramp
1/23/2010 9:35:37 AM ~!~Insteon~!~Calling DM.AddRecord for 12.45.53 1 True
1/23/2010 9:35:39 AM ~!~Insteon~!~Calling DM.AddRecord for 12.45.53 1 False
1/23/2010 9:36:20 AM ~!~Insteon~!~Tap-add mode failed to add the device at address 12.45.53 because: The device properties could not be read. Communication failure. The device was not added.
1/23/2010 9:38:13 AM ~!~Insteon~!~Calling DM.AddRecord for 12.45.52 1 True
1/23/2010 9:38:15 AM ~!~Insteon~!~Calling DM.AddRecord for 12.45.52 1 False
1/23/2010 9:38:19 AM ~!~Insteon~!~** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files\HomeSeer 2\Config\Insteon Error Report.Log
1/23/2010 9:38:19 AM ~!~Insteon~!~** To request help with this problem please email the log file along with a detailed description of what
1/23/2010 9:38:19 AM ~!~Insteon~!~** lead to this problem to technical support.
1/23/2010 9:38:25 AM ~!~Insteon~!~** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files\HomeSeer 2\Config\Insteon Error Report.Log
1/23/2010 9:38:25 AM ~!~Insteon~!~** To request help with this problem please email the log file along with a detailed description of what
1/23/2010 9:38:25 AM ~!~Insteon~!~** lead to this problem to technical support.
1/23/2010 9:38:31 AM ~!~Insteon~!~** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files\HomeSeer 2\Config\Insteon Error Report.Log
1/23/2010 9:38:31 AM ~!~Insteon~!~** To request help with this problem please email the log file along with a detailed description of what
1/23/2010 9:38:31 AM ~!~Insteon~!~** lead to this problem to technical support.
1/23/2010 9:38:38 AM ~!~Insteon~!~** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files\HomeSeer 2\Config\Insteon Error Report.Log
1/23/2010 9:38:38 AM ~!~Insteon~!~** To request help with this problem please email the log file along with a detailed description of what
1/23/2010 9:38:38 AM ~!~Insteon~!~** lead to this problem to technical support.
1/23/2010 9:38:44 AM ~!~Insteon~!~** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files\HomeSeer 2\Config\Insteon Error Report.Log
1/23/2010 9:38:44 AM ~!~Insteon~!~** To request help with this problem please email the log file along with a detailed description of what
1/23/2010 9:38:44 AM ~!~Insteon~!~** lead to this problem to technical support.
1/23/2010 9:38:50 AM ~!~Insteon~!~Calling DM.RemoveRecord for 12.45.52 1 True
1/23/2010 9:41:07 AM ~!~Insteon~!~Got a tap-add request from device 12.67.4B (SwitchLinc V2 600W Dimmer)
----------------------------------------------------
Insteon Error Report.Log (second device 12.67.4A Manual attempt)
----------------------------------------------------
1/23/2010 1:56:39 PM - -xIns: 00 00 00 12 67 4A 0A 10 00, Src[00.00.00] Dst[12.67.0A] Cmd:ID Rqst 00
1/23/2010 1:56:40 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 01 **
1/23/2010 1:56:40 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 02 **
1/23/2010 1:56:40 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 06 **
1/23/2010 1:56:40 PM - Wait: Waiting for Insteon raw message: 12 67 4A 08 A5 E9 8* 03 00
1/23/2010 1:56:40 PM - Wait: Waiting for Insteon raw message:
1/23/2010 1:56:40 PM - -rTxt: sendinsteonraw=True
1/23/2010 1:56:40 PM - -rIns : 04 12 67 4A 08 A5 E9 2A 10 00 - Event: ACK msg, Src[12.67.4A] Dst[08.A5.E9] {Ack/Dir} Cmd:ID Rqst Ex: 00
1/23/2010 1:56:40 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 01 **
1/23/2010 1:56:40 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 02 **
1/23/2010 1:56:40 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 06 **
1/23/2010 1:56:40 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 12 67 4A 08 A5 E9 8* 03 00
1/23/2010 1:56:40 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key
1/23/2010 1:56:40 PM - ***:Error in CheckRawMessageMatch: Object reference not set to an instance of an object. -- Details System.NullReferenceException: Object reference not set to an instance of an object.
at HSPI_INSTEON.HSPI.CheckRawMessageMatch(String RawMsg, String MatchMsg)
1/23/2010 1:56:46 PM - Wait: Did not see the message in time.
1/23/2010 1:56:46 PM - Did not get an ID Broadcast response from 12.67.4A on try # 1
1/23/2010 1:56:46 PM - Calling DM: 'SendInsteonRaw=00 00 00 12 67 4A 0A 10 00'...
1/23/2010 1:56:46 PM - -xIns: 00 00 00 12 67 4A 0A 10 00, Src[00.00.00] Dst[12.67.0A] Cmd:ID Rqst 00
1/23/2010 1:56:46 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 01 **
1/23/2010 1:56:46 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 02 **
1/23/2010 1:56:46 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 06 **
1/23/2010 1:56:46 PM - Wait: Waiting for Insteon raw message: 12 67 4A 08 A5 E9 8* 03 00
1/23/2010 1:56:46 PM - Wait: Waiting for Insteon raw message:
1/23/2010 1:56:46 PM - -rTxt: sendinsteonraw=True
1/23/2010 1:56:47 PM - -rIns : 04 12 67 4A 08 A5 E9 26 10 00 - Event: ACK msg, Src[12.67.4A] Dst[08.A5.E9] {Ack/Dir} Cmd:ID Rqst Ex: 00
1/23/2010 1:56:47 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 26 10 00 against key 0* 12 67 4A ** ** ** 8* 01 **
1/23/2010 1:56:47 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 26 10 00 against key 0* 12 67 4A ** ** ** 8* 02 **
1/23/2010 1:56:47 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 26 10 00 against key 0* 12 67 4A ** ** ** 8* 06 **
1/23/2010 1:56:47 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 26 10 00 against key 12 67 4A 08 A5 E9 8* 03 00
1/23/2010 1:56:47 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 26 10 00 against key
1/23/2010 1:56:47 PM - ***:Error in CheckRawMessageMatch: Object reference not set to an instance of an object. -- Details System.NullReferenceException: Object reference not set to an instance of an object.
at HSPI_INSTEON.HSPI.CheckRawMessageMatch(String RawMsg, String MatchMsg)
1/23/2010 1:56:52 PM - Wait: Did not see the message in time.
1/23/2010 1:56:52 PM - Did not get an ID Broadcast response from 12.67.4A on try # 2
1/23/2010 1:56:52 PM - Calling DM: 'SendInsteonRaw=00 00 00 12 67 4A 0A 10 00'...
1/23/2010 1:56:52 PM - -xIns: 00 00 00 12 67 4A 0A 10 00, Src[00.00.00] Dst[12.67.0A] Cmd:ID Rqst 00
1/23/2010 1:56:52 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 01 **
1/23/2010 1:56:52 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 02 **
1/23/2010 1:56:52 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 06 **
1/23/2010 1:56:52 PM - Wait: Waiting for Insteon raw message: 12 67 4A 08 A5 E9 8* 03 00
1/23/2010 1:56:52 PM - Wait: Waiting for Insteon raw message:
1/23/2010 1:56:52 PM - -rTxt: sendinsteonraw=True
1/23/2010 1:56:53 PM - -rIns : 04 12 67 4A 08 A5 E9 2A 10 00 - Event: ACK msg, Src[12.67.4A] Dst[08.A5.E9] {Ack/Dir} Cmd:ID Rqst Ex: 00
1/23/2010 1:56:53 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 01 **
1/23/2010 1:56:53 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 02 **
1/23/2010 1:56:53 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 06 **
1/23/2010 1:56:53 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 12 67 4A 08 A5 E9 8* 03 00
1/23/2010 1:56:53 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key
1/23/2010 1:56:53 PM - ***:Error in CheckRawMessageMatch: Object reference not set to an instance of an object. -- Details System.NullReferenceException: Object reference not set to an instance of an object.
at HSPI_INSTEON.HSPI.CheckRawMessageMatch(String RawMsg, String MatchMsg)
1/23/2010 1:56:54 PM - Timed poll for Insteon device ID 07.7C.93 Unit code 46, Last contact 1/23/2010 1:55:46 PM. Polling interval of 1 min. reached, polling...
1/23/2010 1:56:54 PM - Attempting to update the database delta values for 07.7C.93
1/23/2010 1:56:54 PM - ResourceMananger::RequestExclusive for Resource 1
1/23/2010 1:56:54 PM - ResourceMananger::RequestExclusive Forced to wait for exclusive lock on resource 1
1/23/2010 1:56:58 PM - Wait: Did not see the message in time.
1/23/2010 1:56:58 PM - Did not get an ID Broadcast response from 12.67.4A on try # 3
1/23/2010 1:56:58 PM - Calling DM: 'SendInsteonRaw=00 00 00 12 67 4A 0A 10 00'...
1/23/2010 1:56:58 PM - -xIns: 00 00 00 12 67 4A 0A 10 00, Src[00.00.00] Dst[12.67.0A] Cmd:ID Rqst 00
1/23/2010 1:56:59 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 01 **
1/23/2010 1:56:59 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 02 **
1/23/2010 1:56:59 PM - Wait: Waiting for Insteon raw message: 0* 12 67 4A ** ** ** 8* 06 **
1/23/2010 1:56:59 PM - Wait: Waiting for Insteon raw message: 12 67 4A 08 A5 E9 8* 03 00
1/23/2010 1:56:59 PM - Wait: Waiting for Insteon raw message:
1/23/2010 1:56:59 PM - -rTxt: sendinsteonraw=True
1/23/2010 1:56:59 PM - -rIns : 04 12 67 4A 08 A5 E9 2A 10 00 - Event: ACK msg, Src[12.67.4A] Dst[08.A5.E9] {Ack/Dir} Cmd:ID Rqst Ex: 00
1/23/2010 1:56:59 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 01 **
1/23/2010 1:56:59 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 02 **
1/23/2010 1:56:59 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 0* 12 67 4A ** ** ** 8* 06 **
1/23/2010 1:56:59 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key 12 67 4A 08 A5 E9 8* 03 00
1/23/2010 1:56:59 PM - CheckRawMessageMatch: 04 12 67 4A 08 A5 E9 2A 10 00 against key
1/23/2010 1:56:59 PM - ***:Error in CheckRawMessageMatch: Object reference not set to an instance of an object. -- Details System.NullReferenceException: Object reference not set to an instance of an object.
----------------------------------------------------Last edited by Sonnyh; January 23, 2010, 03:08 PM.
Comment
-
sonny, sent you a PM, please check it outMark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Mark,
Just wanted to let you know that i really appreciate you taking over this plugin.. I thought it was dead in the water .. which is just what happens sometimes..... It worked for me... but i was unsure about buying any more Insteon ....
But you have taken it under your wing.. and fixed some long outstanding issues, and added some very significant features.
I just want to say thanks.
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">Regards,
Andrew B.
Comment
-
Originally posted by ArbWare View PostMark,
Just wanted to let you know that i really appreciate you taking over this plugin.. I thought it was dead in the water .. which is just what happens sometimes..... It worked for me... but i was unsure about buying any more Insteon ....
But you have taken it under your wing.. and fixed some long outstanding issues, and added some very significant features.
I just want to say thanks.
Thanks again for all your hard work.Billy
Comment
-
Andrew and Bill,
Thanks for your supportMark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Hello Mark,
Tonight I noticed that a few (3-4) Insteon lights did not go on per schedule. I then tried to manually turn them on via HS and they wouldn't go on. I then reset the PLM a couple of times. Still no luck. I also tried to re-read a few Insteon switches with no luck. I then downgraded to last previous version. Everything came back. For a bit there I thought that my PLM had failed me. I am not sure what caused this. I upgraded to current version of PLM plugin about 2 weeks ago.
I will try to re-install newest version of PLM again today and see what happens.Last edited by Pete; January 30, 2010, 10:03 AM.- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
HS4 Lite - Ubuntu 22.04 / Lenovo Tiny M900 / 32Gb Ram
HS4 Pro - V4.1.18.1 - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
-
Originally posted by Pete View PostHello Mark,
Tonight I noticed that a few (3-4) Insteon lights did not go on per schedule. I then tried to manually turn them on via HS and they wouldn't go on. I then reset the PLM a couple of times. Still no luck. I also tried to re-read a few Insteon switches with no luck. I then downgraded to last previous version. Everything came back. For a bit there I thought that my PLM had failed me. I am not sure what caused this. I upgraded to current version of PLM plugin about 2 weeks ago.
I will try to re-install newest version of PLM again today and see what happens.
Also, do you have a USB PLM by any chance? if so, you may have just lost the usb connection and restarting hs may have fixed it. The current v1.3 has code to restart the usb com port if necessary.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Mark,
I turned up logging when I saw it didn't work to watch communications.
I am using a serially connected PLM. I also went to resetting a couple of switches but then noticed that they all worked again.
Will create some TXT files from ultralog and post.
The file starts with latest plugin and somewhere in the middle changing it to previous plugin.
Steps I did last night -
- noticed events didn't turn on Insteon Only switches (just a few events)
- manually tried to control switches with no response
- unplugged Serial PLM and plugged it back in resetting it.
- shut down HS and restarted it.
- still no response from Insteon switches.
- after enabling previous PLM plugin reset a couple of switches and reconfigured them just fine.
- checked other Insteon switches and they all worked fine.Attached FilesLast edited by Pete; January 30, 2010, 02:46 PM.- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
HS4 Lite - Ubuntu 22.04 / Lenovo Tiny M900 / 32Gb Ram
HS4 Pro - V4.1.18.1 - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
-
Mark,
All is looking OK right now using the v1.2.2.2 plugin version.
Should I re-install V1.2.3.4?
If I do is there anything you want me to specfically watch for?- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
HS4 Lite - Ubuntu 22.04 / Lenovo Tiny M900 / 32Gb Ram
HS4 Pro - V4.1.18.1 - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
-
Originally posted by Pete View PostMark,
All is looking OK right now using the v1.2.2.2 plugin version.
Should I re-install V1.2.3.4?
If I do is there anything you want me to specfically watch for?
thanks for the feedback. I haven't seen this one before.
I would suggest upgrading to V1.3--several bug fixes in the new version that exist in v1.2.3.4
if you run into this problem again, please post hs log and the section of your ini for the related devices.
btw, i think you can set your retries down to 5 or 10. If it doesn't work after 5, it's not going to work.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Thanks Mark. Updating to V1.3 today. Will set retries down to 5.- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
HS4 Lite - Ubuntu 22.04 / Lenovo Tiny M900 / 32Gb Ram
HS4 Pro - V4.1.18.1 - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
Comment