Announcement

Collapse
No announcement yet.

Insteon PLM Plug-In Version 1.7.3.1 Release

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    thanks, mark

    Comment


      #17
      Originally posted by stevewinick View Post
      hi mark,

      I noticed that a few of the recent versions of the plug-in have an old problem recurring. it has to do with the momentary C mode with the sensor input.

      I localized the appearance between 1.7.2.5 where it still worked, and 1.7.2.11 where it doesn't. the symptom is that if the device (and the sensor input) are already on and you give homeseer an ON command, the device toggles off. each time you click ON, it toggles. OFF-ON-OFF-ON, etc.

      if you click OFF, it works correctly, ie, ON goes to OFF and nothing happens if you click OFF.

      basically, the ON command always toggles without regard to the sensor input and the OFF command works right

      if you look at the log, it actually reflects ON-OFF-ON-OFF, etc even though only ON is being clicked

      hope you recognize the problem. if you need any more data, please let me know

      best

      sjw
      I think i found the problem. I'll see what i can do about getting a new version out shortly, but i'm kind of in the middle of some changes right now
      Mark

      HS3 Pro 3.0.0.534
      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
      Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

      Comment


        #18
        Excellent. No rush. Glad you found it

        Sjw

        Comment


          #19
          Originally posted by stevewinick View Post
          hi mark,

          I noticed that a few of the recent versions of the plug-in have an old problem recurring. it has to do with the momentary C mode with the sensor input.

          I localized the appearance between 1.7.2.5 where it still worked, and 1.7.2.11 where it doesn't. the symptom is that if the device (and the sensor input) are already on and you give homeseer an ON command, the device toggles off. each time you click ON, it toggles. OFF-ON-OFF-ON, etc.

          if you click OFF, it works correctly, ie, ON goes to OFF and nothing happens if you click OFF.

          basically, the ON command always toggles without regard to the sensor input and the OFF command works right

          if you look at the log, it actually reflects ON-OFF-ON-OFF, etc even though only ON is being clicked

          hope you recognize the problem. if you need any more data, please let me know

          best

          sjw
          Steve,

          i posted a temporary version which should fix the iolinc issue, please try it out and let me know. I didn't want to post this as a new beta because it really doesn't have anything new as of yet.

          http://forums.homeseer.com/showpost....0&postcount=12
          Mark

          HS3 Pro 3.0.0.534
          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
          Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

          Comment


            #20
            first look is good. i'll check more thoroughly

            thanks

            sjw

            Comment


              #21
              LampLinc Dimmer 2 Pin 2457D2X

              Mark, are you supporting these devices yet, or might I have another problem... I can't get them to respond at all...

              I just confirmed that I can make this device work with the 2412U, but not the 2413U... I am running HS 2.5.0.60, and I have 1.7.3.1 running of your Insteon plugin.

              Greg
              Last edited by GregHoog; November 4, 2012, 08:04 PM.

              Comment


                #22
                Originally posted by GregHoog View Post
                Mark, are you supporting these devices yet, or might I have another problem... I can't get them to respond at all...

                I just confirmed that I can make this device work with the 2412U, but not the 2413U... I am running HS 2.5.0.60, and I have 1.7.3.1 running of your Insteon plugin.

                Greg
                in general these devices are supported.

                if the device registered with the 2412u, then its supported

                how are you switching between the 2412u and the 2413u? two hs installations?
                Mark

                HS3 Pro 3.0.0.534
                Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                Comment


                  #23
                  No, just one install Mark... I replaced the 2413U to back down just to see if there was a problem with the newer version of the controller. Seems as though the 2412U worked fine.

                  Comment


                    #24
                    Was able to get it working now..

                    Sorry to bother you...

                    Comment


                      #25
                      no problem. what was the solution?
                      Mark

                      HS3 Pro 3.0.0.534
                      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                      Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                      Comment


                        #26
                        Honestly, I'm not sure what it was Mark... I the only thing that I can think of is that I didn't use capital letters when I typed in the address. I couldn't get them to tap add, so I just entered the info to discover/add them. But in thinking about them, I have a number of much older devices (firmware wise), so it didn't make sense that I couldn't add them. Additionally, when I went back to the 2412U version and they worked really threw me off... so... not sure exactly.

                        Comment


                          #27
                          Originally posted by GregHoog View Post
                          Honestly, I'm not sure what it was Mark... I the only thing that I can think of is that I didn't use capital letters when I typed in the address. I couldn't get them to tap add, so I just entered the info to discover/add them. But in thinking about them, I have a number of much older devices (firmware wise), so it didn't make sense that I couldn't add them. Additionally, when I went back to the 2412U version and they worked really threw me off... so... not sure exactly.
                          ok. thanks. the capital letters wasn't the difference. the plugin converts lowers to uppers before it attempts to use the address. so maybe it was just a comm issue
                          Mark

                          HS3 Pro 3.0.0.534
                          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                          Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                          Comment


                            #28

                            Comment


                              #29
                              what PLM are you using? are use using plugin v1.7.3.1?

                              can you post the errors you are getting?

                              make sure you have configured the com port correctly?

                              I need more information to help you
                              Mark

                              HS3 Pro 3.0.0.534
                              Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                              Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                              Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                              Comment


                                #30
                                plug in error

                                hi still I get the initialization error and I changed the port but none works I hope you can help me

                                Comment

                                Working...
                                X