thanks, mark
Announcement
Collapse
No announcement yet.
Insteon PLM Plug-In Version 1.7.3.1 Release
Collapse
This topic is closed.
X
X
-
Originally posted by stevewinick View Posthi mark,
I noticed that a few of the recent versions of the plug-in have an old problem recurring. it has to do with the momentary C mode with the sensor input.
I localized the appearance between 1.7.2.5 where it still worked, and 1.7.2.11 where it doesn't. the symptom is that if the device (and the sensor input) are already on and you give homeseer an ON command, the device toggles off. each time you click ON, it toggles. OFF-ON-OFF-ON, etc.
if you click OFF, it works correctly, ie, ON goes to OFF and nothing happens if you click OFF.
basically, the ON command always toggles without regard to the sensor input and the OFF command works right
if you look at the log, it actually reflects ON-OFF-ON-OFF, etc even though only ON is being clicked
hope you recognize the problem. if you need any more data, please let me know
best
sjwMark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Originally posted by stevewinick View Posthi mark,
I noticed that a few of the recent versions of the plug-in have an old problem recurring. it has to do with the momentary C mode with the sensor input.
I localized the appearance between 1.7.2.5 where it still worked, and 1.7.2.11 where it doesn't. the symptom is that if the device (and the sensor input) are already on and you give homeseer an ON command, the device toggles off. each time you click ON, it toggles. OFF-ON-OFF-ON, etc.
if you click OFF, it works correctly, ie, ON goes to OFF and nothing happens if you click OFF.
basically, the ON command always toggles without regard to the sensor input and the OFF command works right
if you look at the log, it actually reflects ON-OFF-ON-OFF, etc even though only ON is being clicked
hope you recognize the problem. if you need any more data, please let me know
best
sjw
i posted a temporary version which should fix the iolinc issue, please try it out and let me know. I didn't want to post this as a new beta because it really doesn't have anything new as of yet.
http://forums.homeseer.com/showpost....0&postcount=12Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
LampLinc Dimmer 2 Pin 2457D2X
Mark, are you supporting these devices yet, or might I have another problem... I can't get them to respond at all...
I just confirmed that I can make this device work with the 2412U, but not the 2413U... I am running HS 2.5.0.60, and I have 1.7.3.1 running of your Insteon plugin.
GregLast edited by GregHoog; November 4, 2012, 08:04 PM.
Comment
-
Originally posted by GregHoog View PostMark, are you supporting these devices yet, or might I have another problem... I can't get them to respond at all...
I just confirmed that I can make this device work with the 2412U, but not the 2413U... I am running HS 2.5.0.60, and I have 1.7.3.1 running of your Insteon plugin.
Greg
if the device registered with the 2412u, then its supported
how are you switching between the 2412u and the 2413u? two hs installations?Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
no problem. what was the solution?Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
Honestly, I'm not sure what it was Mark... I the only thing that I can think of is that I didn't use capital letters when I typed in the address. I couldn't get them to tap add, so I just entered the info to discover/add them. But in thinking about them, I have a number of much older devices (firmware wise), so it didn't make sense that I couldn't add them. Additionally, when I went back to the 2412U version and they worked really threw me off... so... not sure exactly.
Comment
-
Originally posted by GregHoog View PostHonestly, I'm not sure what it was Mark... I the only thing that I can think of is that I didn't use capital letters when I typed in the address. I couldn't get them to tap add, so I just entered the info to discover/add them. But in thinking about them, I have a number of much older devices (firmware wise), so it didn't make sense that I couldn't add them. Additionally, when I went back to the 2412U version and they worked really threw me off... so... not sure exactly.Mark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
ihernandez
-
what PLM are you using? are use using plugin v1.7.3.1?
can you post the errors you are getting?
make sure you have configured the com port correctly?
I need more information to help youMark
HS3 Pro 4.2.19.5
Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD
Comment
-
ihernandez
plug in error
hi still I get the initialization error and I changed the port but none works I hope you can help me
Comment
Comment