Announcement

Collapse
No announcement yet.

Go on command

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Go on command

    I am trying to use a switchlinc to trigger a event. I have it set to trigger off of a go on. The switch has a default on level of 50% When I push on it says GO On in the log but the insteon trigger only works if I push it one more time to make it go on 100% then the event will trigger. I have tried setting to trigger off of the 50% setting but that messes up a bunch of other stuff.
    Any ideas?
    Thanks

    #2
    can you post a log snippet of the above tests, and a screen shot of the event trigger page. thanks
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment

    Working...
    X