Announcement

Collapse
No announcement yet.

MINI REMOTE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    MINI REMOTE

    MARK
    THE ATTACHED FILES ARE FROM THE PLUGIN FILES,MAYBE THEY WILL BE HELPFUL IN RESOLVING THE REMOTE PROBLEM IM HAVING
    Attached Files

    #2
    the problem is the device has a new device type of "001B"

    i need to post a new plugin version to fix this.

    i should be able to do this tonight

    you will need to delete these devices from the plugin, and then do a factory reset to prepare for the new version
    Mark

    HS3 Pro 3.0.0.534
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
    Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

    Comment


      #3
      MINI REMOTE

      THANKS MARK
      ILL LOOK FOR NEW VER.

      Comment


        #4
        here you go

        to install"
        shutdown hs3
        make a backup of your hs database, insteon.ini and current plugin dlls.
        unzip the dlls to the homeseer root folder
        restart hs
        Attached Files
        Last edited by mnsandler; June 11, 2015, 08:55 AM.
        Mark

        HS3 Pro 3.0.0.534
        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
        Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

        Comment


          #5
          Everything went well until I installed my original remote and it did not recognize it .I did four factory resets but it didn't change (you'll see in attached file) Is there a fix?
          Attached Files

          Comment


            #6
            can you post the startup log from hs3? i want to make sure the new version is running

            device 34.FF.11 wasn't recognized. its still showing as 001B. i thought this was the new devicetype which i added.
            Mark

            HS3 Pro 3.0.0.534
            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
            Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

            Comment


              #7
              start up log this morning. im sure the new plug is working it loaded the new remote and showed it in device management.
              Attached Files

              Comment


                #8
                not sure if this will make a difference, but i didn't get the correct version of the insteon.dll in the previous zip. I have reposted a new zip above.

                please download and install the insteon.dll as you did before.

                it should be v1.5.0.22. you will see this listed in the startup log.

                aftert that, try the registration again
                Mark

                HS3 Pro 3.0.0.534
                Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                Comment


                  #9
                  MARK
                  YOU'RE RIGHT IT DIDN'T MAKE ANY DIFFERENCE BUT IT PRODUCED THIS MESSAGE
                  Error in Background Update (DoJob #20): System.IndexOutOfRangeException: Index was outside the bounds of the array. at Insteon.Support.BackgroundUpdate.DoJob()

                  I BELIEVE THIS IS A HARDWARE ISSUE. TO THAT END I ORDERED ANOTHER REMOTE. I'LL TRY IT AND LET YOU KNOW. AS I EXPLAINED I DID USE A NEW REMOTE AFTER YOU SENT THE FIRST UPDATE AND IT WENT WELL. DO YOU THINK THIS ERROR WILL BE A PROBLEM?



                  PAT

                  Comment


                    #10
                    ok. let us know the result of the new remote
                    Mark

                    HS3 Pro 3.0.0.534
                    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                    Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                    Comment


                      #11
                      MINI REMOTE

                      MARK
                      INSTALLED NEW REMOTE WORKS FINE.
                      I DROPPED BACK TO v1.5.0.20. FOR THE INSTALL. 22 KEEP SHOWING THE ERROR I SENT IN PRIOR REPLY.
                      ITS THE HARDWARE .

                      Comment


                        #12
                        sounds good. if you can provide any additional info (ie detailed logs) on the prev error, i'll take a look.
                        Mark

                        HS3 Pro 3.0.0.534
                        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                        Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                        Comment


                          #13
                          Error in Background Update (DoJob #20): System.IndexOutOfRangeException: Index was outside the bounds of the array. at Insteon.Support.BackgroundUpdate.DoJob()

                          This is the error I was refering too. This would appear as it when the registration process was happening. This only happened with ver. .22 it did not happen with ver. .20

                          Comment


                            #14
                            can you post a few additional log entries that led up to this? you should be able to find them in aa config\insteon error report.log file
                            Mark

                            HS3 Pro 3.0.0.534
                            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
                            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
                            Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

                            Comment


                              #15
                              ERROR LOGS

                              MARK
                              THE LOGS ARE TO LARGE TO SEND AS A POST . DO YOU HAVE ANOTHER WAY TO GET THEM

                              Comment

                              Working...
                              X