Announcement

Collapse
No announcement yet.

Replacing a KeypadLinc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Yes, local control seems to be okay, and it seems to respond to groups correctly. For example, while Insteon: Light 2nd Master Bedroom Keypad Button A/Load: Light On Level:100, Ramp Rate:2 Sec. won't work, setting a group with just Button A/Load in it set to 100% and 2 seconds seems to work fine.

    Here's the ini section for this keypad. (I normally have sync responders on, but it seemed like it may have been causing problems.)

    [Device 17]
    DeviceID=34.DD.44
    DeviceName=Keypad
    DeviceLocation=Master Bedroom
    DeviceType=0141
    FirmwareVer=44
    EEValues=DefaultRampRate=24,ResumeDim=128,FPTYPE=2,DefaultOn Level=255,OnLEDMask1=2,OnLEDMask2=1,OnLEDMask3=0,OnLEDMask4= 0,OnLEDMask5=0,OnLEDMask6=0,OnLEDMask7=0,OnLEDMask8=0,OffLED Mask1=0,OffLEDMask2=0,OffLEDMask3=0,OffLEDMask4=0,OffLEDMask 5=0,OffLEDMask6=0,OffLEDMask7=0,OffLEDMask8=0,NonToggleButto ns=0,OpFlags1=40,OpFlags5=13,LEDBrightness=16,NonToggleOnOff =0
    DatabaseDelta=2
    RecentDatabaseDelta=2
    PollingInterval=0
    LastContact=7/18/2015 5:05:53 PM
    HopData=559,275,263,21
    Protocol=3
    TotalInteractions=370
    FailedInteractions=44
    LinksDownloaded=1
    NumLinks=66
    Link 1=E2 01 1C F5 09 FF 1F 01 1
    Link 2=E2 02 1C F5 09 FF 1F 02 2
    Link 3=E2 03 1C F5 09 FF 1F 03 3
    Link 4=E2 04 1C F5 09 FF 1F 04 4
    Link 5=E2 05 1C F5 09 FF 1F 05 5
    Link 6=E2 06 1C F5 09 FF 1F 06 6
    Link 7=E2 07 1C F5 09 FF 1F 07 7
    Link 8=E2 08 1C F5 09 FF 1F 08 8
    Link 9=A2 FE 1C F5 09 FF 1F 01 9
    Link 10=A2 2C 1C F5 09 FF 1F 01 10
    Link 11=A2 2C 1C F5 09 FF 1F 02 11
    Link 12=A2 2C 1C F5 09 FF 1F 05 12
    Link 13=E2 05 17 FA 07 FF 1A 01 13
    Link 14=A2 05 1C F5 09 FF 1F 05 14
    Link 15=A2 06 1C F5 09 FF 1F 06 15
    Link 16=A2 27 1C F5 09 00 0C 01 16
    Link 17=A2 16 1C F5 09 FF 1F 08 17
    Link 18=E2 05 0A DA 40 FF 1F 01 18
    Link 19=E2 05 14 CB 38 FF 1F 01 19
    Link 20=E2 05 13 91 3C FF 1F 01 20
    Link 21=A2 26 1C F5 09 80 00 01 21
    Link 22=A2 26 1C F5 09 FF 1F 02 22
    Link 23=A2 28 1C F5 09 FF 1F 05 23
    Link 24=A2 27 1C F5 09 00 1F 02 24
    Link 25=A2 27 1C F5 09 00 1F 05 25
    Link 26=A2 27 1C F5 09 00 1F 06 26
    Link 27=A2 29 1C F5 09 00 1F 05 27
    Link 28=A2 2F 1C F5 09 00 04 01 28
    Link 29=A2 2F 1C F5 09 00 1F 02 29
    Link 30=A2 3D 1C F5 09 00 1F 07 30
    Link 31=E2 05 0A DA 40 FF 1F 04 31
    Link 32=A2 3F 1C F5 09 00 1F 08 32
    Link 33=A2 01 1C F5 09 FF 1F 01 33
    Link 34=A2 02 1C F5 09 FF 1F 02 34
    Link 35=A2 03 1C F5 09 FF 1F 03 35
    Link 36=A2 04 1C F5 09 FF 1F 04 36
    Link 37=A2 15 1C F5 09 FF 1F 07 37
    Link 38=A2 08 0A DA 40 FF 1F 08 38
    Link 39=A2 08 14 CB 38 FF 1F 08 39
    Link 40=A2 07 1A 1B 2D FF 1F 08 40
    Link 41=E2 08 0A DA 40 FF 1F 08 41
    Link 42=E2 08 14 CB 38 FF 1F 08 42
    Link 43=E2 08 1A 1B 2D FF 1F 07 43
    Link 44=A2 07 0A DA 40 FF 1F 07 44
    Link 45=A2 07 14 CB 38 FF 1F 07 45
    Link 46=A2 06 1A 1B 2D FF 1F 07 46
    Link 47=E2 07 0A DA 40 FF 1F 07 47
    Link 48=E2 07 14 CB 38 FF 1F 07 48
    Link 49=E2 07 1A 1B 2D FF 1F 06 49
    Link 50=E2 05 14 CB 38 FF 1F 03 50
    Link 51=A2 04 0A DA 40 FF 1F 05 51
    Link 52=A2 03 14 CB 38 FF 1F 05 52
    Link 53=A2 03 1A 1B 2D FF 1F 05 53
    Link 54=E2 05 1A 1B 2D FF 1F 03 54
    Link 55=A2 06 13 C0 B5 FF 1F 06 55
    Link 56=A2 08 1A 1B 2D FF 1F 06 56
    Link 57=E2 06 13 C0 B5 FF 1F 06 57
    Link 58=E2 06 1A 1B 2D FF 1F 08 58
    Link 59=A2 43 1C F5 09 FF 1F 02 60
    GroupLinkAddress 1=1
    GroupLinkAddress 2=2
    GroupLinkAddress 3=3
    GroupLinkAddress 4=4
    GroupLinkAddress 5=5
    GroupLinkAddress 6=6
    GroupLinkAddress 7=21
    GroupLinkAddress 8=22
    ChannelName1=Light
    ChannelName2=Keypad - Light
    ChannelName3=Keypad - Wake Set
    ChannelName4=Keypad - Home Arm
    ChannelName5=Keypad - Outside Lights
    ChannelName6=Keypad - All Lights Off
    ChannelName7=Keypad - Panic
    ChannelName8=Keypad - Okay
    NoChannelSync=0
    SyncLinkedDevices=0
    HSControlMode=0
    Link 60=A2 01 34 DD 44 FF 1F 02 61
    Link 61=E2 01 34 DD 44 00 00 02 62
    Link 62=A2 3C 1C F5 09 FF 1B 01 63
    Link 63=A2 02 34 DD 44 FF 1B 01 64
    Link 64=E2 02 34 DD 44 00 00 01 65
    Link 65=A2 3E 1C F5 09 FF 1C 01 59
    Link 66=A2 3E 1C F5 09 FF 1F 02 66

    Comment


      #17
      I don't know what to suggest here. have you made any progress on your own?
      Mark

      HS3 Pro 3.0.0.534
      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire3 | RFXCOM | NetCAM | MyQ | BLRadar | BLDenon | Jon00 Charting
      Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory

      Comment


        #18
        Originally posted by mnsandler View Post
        I don't know what to suggest here. have you made any progress on your own?
        No, but I haven't tried yet either. I'll let you know when I get a chance to do a little experimentation. Meanwhile, everything but the on level at ramp rate seems to be working.

        Comment

        Working...
        X