Announcement

Collapse
No announcement yet.

Replacing a KeypadLinc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • joegr
    replied
    Originally posted by mnsandler View Post
    I don't know what to suggest here. have you made any progress on your own?
    No, but I haven't tried yet either. I'll let you know when I get a chance to do a little experimentation. Meanwhile, everything but the on level at ramp rate seems to be working.

    Leave a comment:


  • mnsandler
    replied
    I don't know what to suggest here. have you made any progress on your own?

    Leave a comment:


  • joegr
    replied
    Yes, local control seems to be okay, and it seems to respond to groups correctly. For example, while Insteon: Light 2nd Master Bedroom Keypad Button A/Load: Light On Level:100, Ramp Rate:2 Sec. won't work, setting a group with just Button A/Load in it set to 100% and 2 seconds seems to work fine.

    Here's the ini section for this keypad. (I normally have sync responders on, but it seemed like it may have been causing problems.)

    [Device 17]
    DeviceID=34.DD.44
    DeviceName=Keypad
    DeviceLocation=Master Bedroom
    DeviceType=0141
    FirmwareVer=44
    EEValues=DefaultRampRate=24,ResumeDim=128,FPTYPE=2,DefaultOn Level=255,OnLEDMask1=2,OnLEDMask2=1,OnLEDMask3=0,OnLEDMask4= 0,OnLEDMask5=0,OnLEDMask6=0,OnLEDMask7=0,OnLEDMask8=0,OffLED Mask1=0,OffLEDMask2=0,OffLEDMask3=0,OffLEDMask4=0,OffLEDMask 5=0,OffLEDMask6=0,OffLEDMask7=0,OffLEDMask8=0,NonToggleButto ns=0,OpFlags1=40,OpFlags5=13,LEDBrightness=16,NonToggleOnOff =0
    DatabaseDelta=2
    RecentDatabaseDelta=2
    PollingInterval=0
    LastContact=7/18/2015 5:05:53 PM
    HopData=559,275,263,21
    Protocol=3
    TotalInteractions=370
    FailedInteractions=44
    LinksDownloaded=1
    NumLinks=66
    Link 1=E2 01 1C F5 09 FF 1F 01 1
    Link 2=E2 02 1C F5 09 FF 1F 02 2
    Link 3=E2 03 1C F5 09 FF 1F 03 3
    Link 4=E2 04 1C F5 09 FF 1F 04 4
    Link 5=E2 05 1C F5 09 FF 1F 05 5
    Link 6=E2 06 1C F5 09 FF 1F 06 6
    Link 7=E2 07 1C F5 09 FF 1F 07 7
    Link 8=E2 08 1C F5 09 FF 1F 08 8
    Link 9=A2 FE 1C F5 09 FF 1F 01 9
    Link 10=A2 2C 1C F5 09 FF 1F 01 10
    Link 11=A2 2C 1C F5 09 FF 1F 02 11
    Link 12=A2 2C 1C F5 09 FF 1F 05 12
    Link 13=E2 05 17 FA 07 FF 1A 01 13
    Link 14=A2 05 1C F5 09 FF 1F 05 14
    Link 15=A2 06 1C F5 09 FF 1F 06 15
    Link 16=A2 27 1C F5 09 00 0C 01 16
    Link 17=A2 16 1C F5 09 FF 1F 08 17
    Link 18=E2 05 0A DA 40 FF 1F 01 18
    Link 19=E2 05 14 CB 38 FF 1F 01 19
    Link 20=E2 05 13 91 3C FF 1F 01 20
    Link 21=A2 26 1C F5 09 80 00 01 21
    Link 22=A2 26 1C F5 09 FF 1F 02 22
    Link 23=A2 28 1C F5 09 FF 1F 05 23
    Link 24=A2 27 1C F5 09 00 1F 02 24
    Link 25=A2 27 1C F5 09 00 1F 05 25
    Link 26=A2 27 1C F5 09 00 1F 06 26
    Link 27=A2 29 1C F5 09 00 1F 05 27
    Link 28=A2 2F 1C F5 09 00 04 01 28
    Link 29=A2 2F 1C F5 09 00 1F 02 29
    Link 30=A2 3D 1C F5 09 00 1F 07 30
    Link 31=E2 05 0A DA 40 FF 1F 04 31
    Link 32=A2 3F 1C F5 09 00 1F 08 32
    Link 33=A2 01 1C F5 09 FF 1F 01 33
    Link 34=A2 02 1C F5 09 FF 1F 02 34
    Link 35=A2 03 1C F5 09 FF 1F 03 35
    Link 36=A2 04 1C F5 09 FF 1F 04 36
    Link 37=A2 15 1C F5 09 FF 1F 07 37
    Link 38=A2 08 0A DA 40 FF 1F 08 38
    Link 39=A2 08 14 CB 38 FF 1F 08 39
    Link 40=A2 07 1A 1B 2D FF 1F 08 40
    Link 41=E2 08 0A DA 40 FF 1F 08 41
    Link 42=E2 08 14 CB 38 FF 1F 08 42
    Link 43=E2 08 1A 1B 2D FF 1F 07 43
    Link 44=A2 07 0A DA 40 FF 1F 07 44
    Link 45=A2 07 14 CB 38 FF 1F 07 45
    Link 46=A2 06 1A 1B 2D FF 1F 07 46
    Link 47=E2 07 0A DA 40 FF 1F 07 47
    Link 48=E2 07 14 CB 38 FF 1F 07 48
    Link 49=E2 07 1A 1B 2D FF 1F 06 49
    Link 50=E2 05 14 CB 38 FF 1F 03 50
    Link 51=A2 04 0A DA 40 FF 1F 05 51
    Link 52=A2 03 14 CB 38 FF 1F 05 52
    Link 53=A2 03 1A 1B 2D FF 1F 05 53
    Link 54=E2 05 1A 1B 2D FF 1F 03 54
    Link 55=A2 06 13 C0 B5 FF 1F 06 55
    Link 56=A2 08 1A 1B 2D FF 1F 06 56
    Link 57=E2 06 13 C0 B5 FF 1F 06 57
    Link 58=E2 06 1A 1B 2D FF 1F 08 58
    Link 59=A2 43 1C F5 09 FF 1F 02 60
    GroupLinkAddress 1=1
    GroupLinkAddress 2=2
    GroupLinkAddress 3=3
    GroupLinkAddress 4=4
    GroupLinkAddress 5=5
    GroupLinkAddress 6=6
    GroupLinkAddress 7=21
    GroupLinkAddress 8=22
    ChannelName1=Light
    ChannelName2=Keypad - Light
    ChannelName3=Keypad - Wake Set
    ChannelName4=Keypad - Home Arm
    ChannelName5=Keypad - Outside Lights
    ChannelName6=Keypad - All Lights Off
    ChannelName7=Keypad - Panic
    ChannelName8=Keypad - Okay
    NoChannelSync=0
    SyncLinkedDevices=0
    HSControlMode=0
    Link 60=A2 01 34 DD 44 FF 1F 02 61
    Link 61=E2 01 34 DD 44 00 00 02 62
    Link 62=A2 3C 1C F5 09 FF 1B 01 63
    Link 63=A2 02 34 DD 44 FF 1B 01 64
    Link 64=E2 02 34 DD 44 00 00 01 65
    Link 65=A2 3E 1C F5 09 FF 1C 01 59
    Link 66=A2 3E 1C F5 09 FF 1F 02 66

    Leave a comment:


  • mnsandler
    replied
    not sure what's going on. does the kpl work correctly when controlled locally

    Leave a comment:


  • joegr
    replied
    I'm also getting this:
    7/18/2015 6:12:38 PM Error Exception creating device enumerator at 0: Object reference not set to an instance of an object

    When trying to:
    Insteon: Light 2nd Master Bedroom Keypad Button A/Load: Light On Level:100, Ramp Rate:2 Sec.

    (The light does not turn on.)

    Leave a comment:


  • joegr
    replied
    While you're looking, I have this new odd one in the log...

    Unknown command sent to KPL buttons...exiting

    I think it's related to my attempt to combine the top two buttons (making a 7 button keypadlinc). It worked for the older keypadlinc, but not as much for the new one. It's not a big deal, and I'm sure I can get around it one way or another...


    7/18/2015 5:56:46 PM Insteon Received message from 2nd Master Bedroom Keypad (34.DD.44) taking hops: 1
    7/18/2015 5:56:46 PM Insteon Received [7 (Master Bedroom Keypad - Light) Go OFF
    7/18/2015 5:56:46 PM Insteon ProcessGroupBroadcast: Device 2nd Master Bedroom Keypad Button B: Keypad - Light (34.DD.44) is group broadcast source (tgt group/button:2) sending cmd 13
    7/18/2015 5:56:46 PM Insteon Setting status and value for device [7. Old status:2 Old Value:100, New Status:3 New Value:0
    7/18/2015 5:56:46 PM Insteon Setting status and value for device [6. Old status:2 Old Value:100, New Status:3 New Value:0
    7/18/2015 5:56:46 PM Insteon Checking for keypadlinc button sync on device 34.DD.44 src index 1, SrcIsSyncTarget=True...
    7/18/2015 5:56:46 PM Insteon Checking for keypadlinc button sync on device 34.DD.44 src index 2, SrcIsSyncTarget=True...
    7/18/2015 5:56:46 PM Insteon --KPL button Sync, Need to turn button 1 OFF because button 2 went OFF
    7/18/2015 5:56:46 PM Insteon Setting status and value for device [6. Old status:3 Old Value:0, New Status:3 New Value:0
    7/18/2015 5:56:46 PM Insteon --KPL button Sync, Need to turn button 2 OFF because button 1 went OFF
    7/18/2015 5:56:46 PM Insteon Setting status and value for device [7. Old status:3 Old Value:0, New Status:3 New Value:0
    7/18/2015 5:56:46 PM Insteon ProcessGroupBroadcast: Updating Group #20 status
    7/18/2015 5:56:46 PM Insteon Setting value for \7
    7/18/2015 5:56:46 PM Insteon ProcessGroupBroadcastUpdateResponders: Located remote link record match for group broadcast - Device:34.DD.44 link record #63 target channel 1
    7/18/2015 5:56:46 PM Insteon Sending command 02 62 34 DD 44 0F 2F 0B to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 5:56:46 PM Insteon Setting status and value for device [6. Old status:3 Old Value:0, New Status:3 New Value:0
    7/18/2015 5:56:46 PM Insteon Checking for keypadlinc button sync on device 34.DD.44 src index 1, SrcIsSyncTarget=False...
    7/18/2015 5:56:46 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 00 01 02 CB 13 02
    7/18/2015 5:56:46 PM Insteon ..Got NAK from the RF PLM for command
    7/18/2015 5:56:46 PM Insteon ..Retry #1 required. Pausing 250ms for RF PLM to clear...
    7/18/2015 5:56:46 PM Insteon Received message from 2nd Master Bedroom Keypad (34.DD.44) taking hops: 1
    7/18/2015 5:56:46 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 13 00 02 CB 06 00
    7/18/2015 5:56:46 PM Insteon Received message from 2nd Master Bedroom Keypad (34.DD.44) taking hops: 1
    7/18/2015 5:56:46 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 2F 0B 06
    7/18/2015 5:56:47 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 2F 0B
    7/18/2015 5:56:47 PM Insteon SyncResponderDevices called for device code: [6
    7/18/2015 5:56:47 PM Insteon Received message from 2nd Master Bedroom Keypad (34.DD.44) taking hops: 1
    7/18/2015 5:56:47 PM Insteon Received a Direct ACK from 2nd Master Bedroom Keypad (34.DD.44)
    7/18/2015 5:56:47 PM Insteon Sending sync command to linked responder device: 2nd Master Bedroom Keypad Button B: Keypad - Light (34.DD.44)
    7/18/2015 5:56:47 PM Insteon Attempting to get a KPL LED status response from Insteon device 34.DD.44
    7/18/2015 5:56:47 PM Insteon Sending command 02 62 34 DD 44 0F 19 01 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 5:56:47 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 19 01 06
    7/18/2015 5:56:47 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 00 04
    7/18/2015 5:56:47 PM Insteon Unknown command sent to KPL buttons...exiting
    7/18/2015 5:56:47 PM Insteon SyncResponderDevices called for device code: [7
    7/18/2015 5:56:47 PM Insteon Received message from 2nd Master Bedroom Keypad (34.DD.44) taking hops: 1
    7/18/2015 5:56:47 PM Insteon Received a Direct ACK from 2nd Master Bedroom Keypad (34.DD.44)
    7/18/2015 5:56:47 PM Insteon Sending sync command to linked responder device: 2nd Master Bedroom Keypad Button A/Load: Light (34.DD.44)
    7/18/2015 5:56:47 PM Insteon Setting status and value for device [6. Old status:3 Old Value:0, New Status:3 New Value:0
    7/18/2015 5:56:47 PM Insteon Checking for keypadlinc button sync on device 34.DD.44 src index 1, SrcIsSyncTarget=True...
    7/18/2015 5:56:47 PM Insteon --KPL button Sync, Need to turn button 2 OFF because button 1 went OFF
    7/18/2015 5:56:47 PM Insteon Setting status and value for device [7. Old status:3 Old Value:0, New Status:3 New Value:0
    7/18/2015 5:56:47 PM Insteon Sending sync command to linked responder device: 2nd Master Bedroom Keypad Button A/Load: Light (34.DD.44)
    7/18/2015 5:56:47 PM Insteon Setting status and value for device [6. Old status:3 Old Value:0, New Status:3 New Value:0
    7/18/2015 5:56:47 PM Insteon Checking for keypadlinc button sync on device 34.DD.44 src index 1, SrcIsSyncTarget=True...
    7/18/2015 5:56:47 PM Insteon --KPL button Sync, Need to turn button 2 OFF because button 1 went OFF
    7/18/2015 5:56:47 PM Insteon Setting status and value for device [7. Old status:3 Old Value:0, New Status:3 New Value:0
    7/18/2015 5:56:47 PM Insteon Sending sync command to linked responder device: 2nd Master Bedroom Keypad Button B: Keypad - Light (34.DD.44)
    7/18/2015 5:56:47 PM Insteon Attempting to get a KPL LED status response from Insteon device 34.DD.44
    7/18/2015 5:56:47 PM Insteon Sending command 02 62 34 DD 44 0F 19 01 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 5:56:48 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 19 01 06
    7/18/2015 5:56:48 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 00 04 Debouncing repeat.

    Leave a comment:


  • mnsandler
    replied
    Glad you got it working. I'll have to check the replace routine code.

    Leave a comment:


  • joegr
    replied
    That did it.

    Now we have joy.
    Adding it as a new device, deleting it, then running replace worked. I haven't fully verified that all links and groups are there, but so far everything I've tried has worked.

    Thanks much, especially on a Saturday. I do appreciate it.

    Leave a comment:


  • mnsandler
    replied
    the kpl is responding as if it doesn't recognize the plm as a valid controller

    how about as a test, see if you can register the new kpl as a new device. if this works, delete the device from the registration, and then try the replace routine

    if this doesn't work, then I'm out of ideas

    Leave a comment:


  • joegr
    replied
    Well darn, still no joy...
    AFAIK, they did link.

    7/18/2015 3:29:39 PM Insteon Pass 1, updating devices that appear to have stale link tables...RF devices are ignored...
    7/18/2015 3:29:39 PM Insteon Pass 2, Now attempting to reprogram your system for the replacement device...
    7/18/2015 3:29:40 PM Insteon Program And Replace Device - Process starting... (0E.1F.DE-34.DD.44)...
    7/18/2015 3:29:40 PM Insteon Step 1 of 5: Programming new device with links...
    7/18/2015 3:30:07 PM Insteon Did not receive a response from (34.DD.44). Try #5 failed.
    7/18/2015 3:30:07 PM Insteon Your system could not be reprogrammed.Program And Replace Device - The destination device could not be programmed, function aborted before system/device changes were made.
    7/18/2015 3:30:07 PM Insteon Replace device routine complete.
    7/18/2015 3:30:43 PM Motion Big Room No Motion
    7/18/2015 3:31:09 PM Insteon Scheduled polling enabled.
    7/18/2015 3:31:17 PM Insteon Edit Insteon Device #17 Addr: 0E.1F.DE, Name:Keypad, Location:Master Bedroom
    7/18/2015 3:31:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:22 PM Insteon Replace Device Selected
    7/18/2015 3:31:22 PM Insteon In Replace - Device #17 Addr: 0E.1F.DE, Name:Keypad, Location:Master Bedroom
    7/18/2015 3:31:33 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:33 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:33 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:33 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:33 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:33 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:33 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:33 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:37 PM Insteon Replace Device Confirmation Selected
    7/18/2015 3:31:37 PM Insteon Launching new BackgroundUpdate Thread with job type 10...
    7/18/2015 3:31:37 PM Insteon In BackgroundUpdate Thread...
    7/18/2015 3:31:37 PM Insteon Calling AddRecord for 34.DD.44 1 True
    7/18/2015 3:31:37 PM Insteon Sending command 02 6F 41 A2 01 34 DD 44 00 00 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:True
    7/18/2015 3:31:37 PM Insteon ..Got RF PLM Response 02 6F 41 A2 01 34 DD 44 00 00 00 15
    7/18/2015 3:31:37 PM Insteon Sending Insteon ID Broadcast for '34.DD.44'
    7/18/2015 3:31:37 PM Insteon Sending command 02 62 34 DD 44 0F 10 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:37 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 10 00 06
    7/18/2015 3:31:38 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 A7 10 FF
    7/18/2015 3:31:38 PM Insteon Got i2cs type broadcast for Insteon ID 34.DD.44 Need to link device to RF PLM now...
    7/18/2015 3:31:38 PM Insteon Attempting to link the i2cs device 34.DD.44 to the RF PLM
    7/18/2015 3:31:38 PM Insteon Sending command 02 64 01 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:38 PM Insteon ..Got RF PLM Response 02 64 01 00 06
    7/18/2015 3:31:38 PM Insteon Sending command 02 62 34 DD 44 1F 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F7 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:38 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F7 06
    7/18/2015 3:31:39 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 09 00
    7/18/2015 3:31:39 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:39 PM Insteon PLM_ProcessInBuffer received STX 0x53 (Link Completed):01 00 34 DD 44 01 41 44
    7/18/2015 3:31:41 PM Insteon Sending command 02 62 34 DD 44 1F 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F7 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:41 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F7 06
    7/18/2015 3:31:41 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 09 00
    7/18/2015 3:31:41 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:41 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 01 41 44 87 01 76
    7/18/2015 3:31:41 PM Insteon Got i2cs type broadcast for Insteon ID 34.DD.44 of type , Firmware version
    7/18/2015 3:31:41 PM Insteon Sending command 02 62 34 DD 44 0F 08 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:42 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 08 00 06
    7/18/2015 3:31:42 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 08 00
    7/18/2015 3:31:42 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:42 PM Insteon Pass 1, updating devices that appear to have stale link tables...RF devices are ignored...
    7/18/2015 3:31:42 PM Insteon Pass 2, Now attempting to reprogram your system for the replacement device...
    7/18/2015 3:31:42 PM Insteon Calling AddRecord for 34.DD.44 1 True
    7/18/2015 3:31:42 PM Insteon Sending command 02 6F 41 A2 01 34 DD 44 00 00 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:True
    7/18/2015 3:31:42 PM Insteon ..Got RF PLM Response 02 6F 41 A2 01 34 DD 44 00 00 00 15
    7/18/2015 3:31:42 PM Insteon Sending Insteon ID Broadcast for '34.DD.44'
    7/18/2015 3:31:42 PM Insteon Sending command 02 62 34 DD 44 0F 10 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:43 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 10 00 06
    7/18/2015 3:31:43 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 10 00
    7/18/2015 3:31:43 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:43 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 01 41 44 87 01 76
    7/18/2015 3:31:43 PM Insteon Got controller/responder type broadcast for Insteon ID 34.DD.44 of type 0141, Firmware version 44
    7/18/2015 3:31:43 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 01 41 44 87 01 76 Debouncing repeat.
    7/18/2015 3:31:43 PM Insteon Program And Replace Device - Process starting... (0E.1F.DE-34.DD.44)...
    7/18/2015 3:31:43 PM Insteon Step 1 of 5: Programming new device with links...
    7/18/2015 3:31:43 PM Insteon GetInsteonProtocol for '34.DD.44'
    7/18/2015 3:31:43 PM Insteon Sending command 02 62 34 DD 44 0F 0D 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:43 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 0D 00 06
    7/18/2015 3:31:44 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 0D 02
    7/18/2015 3:31:44 PM Insteon Got Insteon Protocol Engine response from Insteon ID 34.DD.44, Protocol i2CS
    7/18/2015 3:31:44 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:44 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F FF 08 E2 01 1C F5 09 FF 1F 01 9D to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:44 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F FF 08 E2 01 1C F5 09 FF 1F 01 9D 06
    7/18/2015 3:31:45 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00
    7/18/2015 3:31:45 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F F7 08 E2 02 1C F5 09 FF 1F 02 A3 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:45 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:45 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F F7 08 E2 02 1C F5 09 FF 1F 02 A3 06
    7/18/2015 3:31:45 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00 Debouncing repeat.
    7/18/2015 3:31:48 PM Insteon Did not receive a response from (34.DD.44). Try #1 failed.
    7/18/2015 3:31:48 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F F7 08 E2 02 1C F5 09 FF 1F 02 A3 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:48 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F F7 08 E2 02 1C F5 09 FF 1F 02 A3 06
    7/18/2015 3:31:48 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:48 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:48 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:48 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:48 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:48 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:48 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:31:48 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:31:48 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00
    7/18/2015 3:31:48 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:48 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:49 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 06
    7/18/2015 3:31:49 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00 Debouncing repeat.
    7/18/2015 3:31:52 PM Insteon Did not receive a response from (34.DD.44). Try #1 failed.
    7/18/2015 3:31:52 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:52 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 06
    7/18/2015 3:31:52 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00
    7/18/2015 3:31:52 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F E7 08 E2 04 1C F5 09 FF 1F 04 AF to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:52 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:52 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F E7 08 E2 04 1C F5 09 FF 1F 04 AF 06
    7/18/2015 3:31:53 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00 Debouncing repeat.
    7/18/2015 3:31:55 PM Insteon Did not receive a response from (34.DD.44). Try #1 failed.
    7/18/2015 3:31:55 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F E7 08 E2 04 1C F5 09 FF 1F 04 AF to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:55 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F E7 08 E2 04 1C F5 09 FF 1F 04 AF 06
    7/18/2015 3:31:56 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00
    7/18/2015 3:31:56 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F DF 08 E2 05 1C F5 09 FF 1F 05 B5 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:56 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:31:56 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F DF 08 E2 05 1C F5 09 FF 1F 05 B5 06
    7/18/2015 3:31:57 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00 Debouncing repeat.
    7/18/2015 3:31:59 PM Insteon Did not receive a response from (34.DD.44). Try #1 failed.
    7/18/2015 3:31:59 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F DF 08 E2 05 1C F5 09 FF 1F 05 B5 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:31:59 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F DF 08 E2 05 1C F5 09 FF 1F 05 B5 06
    7/18/2015 3:32:00 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00
    7/18/2015 3:32:00 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:32:00 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 3:32:00 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB 06
    7/18/2015 3:32:01 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00 Debouncing repeat.
    7/18/2015 3:32:03 PM Insteon Did not receive a response from (34.DD.44). Try #1 failed.
    7/18/2015 3:32:03 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:32:03 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB 06
    7/18/2015 3:32:03 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:32:03 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:32:03 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:32:03 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:32:03 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:32:03 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:32:03 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:32:03 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:32:03 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 A7 2F FF
    7/18/2015 3:32:05 PM Insteon Did not receive a response from (34.DD.44). Try #2 failed.
    7/18/2015 3:32:05 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:32:05 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB 06
    7/18/2015 3:32:06 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 A7 2F FF
    7/18/2015 3:32:08 PM Insteon Did not receive a response from (34.DD.44). Try #3 failed.
    7/18/2015 3:32:08 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:32:08 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB 06
    7/18/2015 3:32:08 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 A7 2F FF
    7/18/2015 3:32:10 PM Insteon Did not receive a response from (34.DD.44). Try #4 failed.
    7/18/2015 3:32:10 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 3:32:10 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F D7 08 E2 06 1C F5 09 FF 1F 06 BB 06
    7/18/2015 3:32:11 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 A7 2F FF
    7/18/2015 3:32:13 PM Insteon Did not receive a response from (34.DD.44). Try #5 failed.
    7/18/2015 3:32:13 PM Insteon Program And Replace Device - The destination device could not be programmed, function aborted before system/device changes were made.
    7/18/2015 3:32:13 PM Insteon Your system could not be reprogrammed.Program And Replace Device - The destination device could not be programmed, function aborted before system/device changes were made.
    7/18/2015 3:32:13 PM Insteon Replace device routine complete.
    7/18/2015 3:32:13 PM Insteon BackgroundUpdate Thread Complete...
    7/18/2015 3:32:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:32:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:32:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:32:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:32:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:32:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:32:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 3:32:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 3:32:20 PM Insteon Edit Insteon Device #17 Addr: 0E.1F.DE, Name:Keypad, Location:Master Bedroom
    7/18/2015 3:32:30 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 00 00 01 CB 11 00
    7/18/2015 3:32:30 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 11 00 01 CB 06 00
    7/18/2015 3:32:32 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 00 00 01 CB 13 00
    7/18/2015 3:32:32 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 13 00 01 C7 06 00

    The last of that was me turning the load on and off locally.

    Leave a comment:


  • mnsandler
    replied
    try manual linking the kpl to the plm first and they the swap. start with the plm in linking mode then start the kpl linking mode

    Leave a comment:


  • joegr
    replied
    Okay, I have the new keypadlinc, and it's not going so well. When I try replace device, it ends with this:
    Your system could not be reprogrammed. Program And Replace Device - The destination device could not be programmed, function aborted before system/device changes were made.

    The Log is as follows:

    7/18/2015 1:29:45 PM Insteon Edit Insteon Device #17 Addr: 0E.1F.DE, Name:Keypad, Location:Master Bedroom
    7/18/2015 1:29:48 PM Insteon Starting Scheduled Polling...
    7/18/2015 1:29:48 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 1:29:56 PM Insteon Replace Device Selected
    7/18/2015 1:29:56 PM Insteon In Replace - Device #17 Addr: 0E.1F.DE, Name:Keypad, Location:Master Bedroom
    7/18/2015 1:30:03 PM Insteon Starting Scheduled Polling...
    7/18/2015 1:30:03 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 1:30:35 PM Insteon Replace Device Confirmation Selected
    7/18/2015 1:30:35 PM Insteon Launching new BackgroundUpdate Thread with job type 10...
    7/18/2015 1:30:35 PM Insteon In BackgroundUpdate Thread...
    7/18/2015 1:30:35 PM Insteon Calling AddRecord for 34.DD.44 1 True
    7/18/2015 1:30:35 PM Insteon Sending command 02 6F 41 A2 01 34 DD 44 00 00 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:True
    7/18/2015 1:30:35 PM Insteon ..Got RF PLM Response 02 6F 41 A2 01 34 DD 44 00 00 00 15
    7/18/2015 1:30:35 PM Insteon Sending Insteon ID Broadcast for '34.DD.44'
    7/18/2015 1:30:35 PM Insteon Sending command 02 62 34 DD 44 0F 10 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:36 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 10 00 06
    7/18/2015 1:30:36 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 A7 10 FF
    7/18/2015 1:30:36 PM Insteon Got i2cs type broadcast for Insteon ID 34.DD.44 Need to link device to RF PLM now...
    7/18/2015 1:30:36 PM Insteon Attempting to link the i2cs device 34.DD.44 to the RF PLM
    7/18/2015 1:30:36 PM Insteon Sending command 02 64 01 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:36 PM Insteon ..Got RF PLM Response 02 64 01 00 06
    7/18/2015 1:30:36 PM Insteon Sending command 02 62 34 DD 44 1F 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F7 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:36 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F7 06
    7/18/2015 1:30:38 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 09 00
    7/18/2015 1:30:38 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 1:30:38 PM Insteon PLM_ProcessInBuffer received STX 0x53, but the command payload is incomplete, waiting..
    ..................... This same line 154 more times ...............................................
    7/18/2015 1:30:39 PM Insteon PLM_ProcessInBuffer received STX 0x53, but the command payload is incomplete, waiting..
    7/18/2015 1:30:39 PM Insteon PLM_ProcessInBuffer received STX 0x53 (Link Completed):01 00 34 DD 44 01 41 44
    7/18/2015 1:30:39 PM Insteon Sending command 02 62 34 DD 44 1F 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F7 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:39 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F7 06
    7/18/2015 1:30:40 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 09 00
    7/18/2015 1:30:40 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 1:30:40 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 01 41 44 8B 01 76
    7/18/2015 1:30:40 PM Insteon Got i2cs type broadcast for Insteon ID 34.DD.44 of type , Firmware version
    7/18/2015 1:30:40 PM Insteon Sending command 02 62 34 DD 44 0F 08 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:40 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 08 00 06
    7/18/2015 1:30:41 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 08 00
    7/18/2015 1:30:41 PM Insteon Pass 1, updating devices that appear to have stale link tables...RF devices are ignored...
    7/18/2015 1:30:41 PM Insteon Pass 2, Now attempting to reprogram your system for the replacement device...
    7/18/2015 1:30:41 PM Insteon Calling AddRecord for 34.DD.44 1 True
    7/18/2015 1:30:41 PM Insteon Sending command 02 6F 41 A2 01 34 DD 44 00 00 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:True
    7/18/2015 1:30:41 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 1:30:41 PM Insteon ..Got RF PLM Response 02 6F 41 A2 01 34 DD 44 00 00 00 15
    7/18/2015 1:30:41 PM Insteon Sending Insteon ID Broadcast for '34.DD.44'
    7/18/2015 1:30:41 PM Insteon Sending command 02 62 34 DD 44 0F 10 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:41 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 10 00 06
    7/18/2015 1:30:41 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 10 00
    7/18/2015 1:30:41 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 1:30:42 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 01 41 44 8B 01 76
    7/18/2015 1:30:42 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 01 41 44 8B 01 76 Debouncing repeat.
    7/18/2015 1:30:42 PM Insteon Got controller/responder type broadcast for Insteon ID 34.DD.44 of type 0141, Firmware version 44
    7/18/2015 1:30:42 PM Insteon Program And Replace Device - Process starting... (0E.1F.DE-34.DD.44)...
    7/18/2015 1:30:42 PM Insteon Step 1 of 5: Programming new device with links...
    7/18/2015 1:30:42 PM Insteon GetInsteonProtocol for '34.DD.44'
    7/18/2015 1:30:42 PM Insteon Sending command 02 62 34 DD 44 0F 0D 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:42 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 0F 0D 00 06
    7/18/2015 1:30:42 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 0D 02
    7/18/2015 1:30:42 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 1:30:42 PM Insteon Got Insteon Protocol Engine response from Insteon ID 34.DD.44, Protocol i2CS
    7/18/2015 1:30:42 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F FF 08 E2 01 1C F5 09 FF 1F 01 9D to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:42 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F FF 08 E2 01 1C F5 09 FF 1F 01 9D 06
    7/18/2015 1:30:44 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 2F 00
    7/18/2015 1:30:44 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F F7 08 E2 02 1C F5 09 FF 1F 02 A3 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:44 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 1:30:44 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F F7 08 E2 02 1C F5 09 FF 1F 02 A3 06
    7/18/2015 1:30:44 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 27 2F 00 Debouncing repeat.
    7/18/2015 1:30:47 PM Insteon Did not receive a response from (34.DD.44). Try #1 failed.
    7/18/2015 1:30:47 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F F7 08 E2 02 1C F5 09 FF 1F 02 A3 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:47 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F F7 08 E2 02 1C F5 09 FF 1F 02 A3 06
    7/18/2015 1:30:47 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 2F 00
    7/18/2015 1:30:47 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:47 PM Insteon Received a Direct ACK from 34.DD.44
    7/18/2015 1:30:48 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 06
    7/18/2015 1:30:48 PM Insteon Starting Scheduled Polling...
    7/18/2015 1:30:48 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 1:30:48 PM Insteon Starting Scheduled Polling...
    7/18/2015 1:30:48 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 1:30:48 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 2B 2F 00 Debouncing repeat.
    7/18/2015 1:30:51 PM Insteon Did not receive a response from (34.DD.44). Try #1 failed.
    7/18/2015 1:30:51 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:51 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 06
    7/18/2015 1:30:51 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 AB 2F FF
    7/18/2015 1:30:53 PM Insteon Did not receive a response from (34.DD.44). Try #2 failed.
    7/18/2015 1:30:53 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:53 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 06
    7/18/2015 1:30:54 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 AB 2F FF
    7/18/2015 1:30:56 PM Insteon Did not receive a response from (34.DD.44). Try #3 failed.
    7/18/2015 1:30:56 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:56 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 06
    7/18/2015 1:30:56 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 AB 2F FF
    7/18/2015 1:30:58 PM Insteon Did not receive a response from (34.DD.44). Try #4 failed.
    7/18/2015 1:30:58 PM Insteon Sending command 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
    7/18/2015 1:30:58 PM Insteon ..Got RF PLM Response 02 62 34 DD 44 1F 2F 00 00 02 0F EF 08 E2 03 1C F5 09 FF 1F 03 A9 06
    7/18/2015 1:30:59 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 1C F5 09 A7 2F FF
    7/18/2015 1:31:01 PM Insteon Did not receive a response from (34.DD.44). Try #5 failed.
    7/18/2015 1:31:01 PM Insteon Program And Replace Device - The destination device could not be programmed, function aborted before system/device changes were made.
    7/18/2015 1:31:01 PM Insteon Your system could not be reprogrammed.Program And Replace Device - The destination device could not be programmed, function aborted before system/device changes were made.
    7/18/2015 1:31:01 PM Insteon Replace device routine complete.
    7/18/2015 1:31:01 PM Insteon BackgroundUpdate Thread Complete...
    7/18/2015 1:31:03 PM Insteon Starting Scheduled Polling...
    7/18/2015 1:31:03 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 1:31:03 PM Insteon Starting Scheduled Polling...
    7/18/2015 1:31:03 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 1:31:14 PM Insteon Received STX 0x50 (Raw Insteon Rec):27 8D 33 00 00 02 CB 13 02
    7/18/2015 1:31:14 PM Insteon Received message from 1st Kitchen Motion Sensor (27.8D.33) taking hops: 1
    7/18/2015 1:31:14 PM Insteon ProcessGroupBroadcast: Device 1st Kitchen Motion Sensor Dusk/Dawn Sensor: (27.8D.33) is group broadcast source (tgt group/button:2) sending cmd 13
    7/18/2015 1:31:14 PM Insteon Setting status and value for device [96. Old status:2 Old Value:100, New Status:3 New Value:0
    7/18/2015 1:31:15 PM Insteon Received STX 0x50 (Raw Insteon Rec):27 8D 33 00 00 02 CB 13 02 Debouncing repeat.
    7/18/2015 1:31:15 PM Insteon Received STX 0x50 (Raw Insteon Rec):27 8D 33 00 01 02 CB 13 02
    7/18/2015 1:31:15 PM Insteon Received message from 1st Kitchen Motion Sensor (27.8D.33) taking hops: 1
    7/18/2015 1:31:15 PM Insteon Received STX 0x50 (Raw Insteon Rec):27 8D 33 13 00 02 CB 06 00
    7/18/2015 1:31:15 PM Insteon Received message from 1st Kitchen Motion Sensor (27.8D.33) taking hops: 1
    7/18/2015 1:31:15 PM Insteon Received STX 0x50 (Raw Insteon Rec):27 8D 33 13 00 02 CB 06 00 Debouncing repeat.
    7/18/2015 1:31:18 PM Insteon Starting Scheduled Polling...
    7/18/2015 1:31:18 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 1:31:34 PM Insteon Received STX 0x50 (Raw Insteon Rec):36 FE F1 00 00 04 CB 11 04
    7/18/2015 1:31:34 PM Insteon Received message from HVAC Stage2 (36.FE.F1) taking hops: 1
    7/18/2015 1:31:34 PM Insteon Received STX 0x50 (Raw Insteon Rec):36 FE F1 00 00 04 CB 11 04 Debouncing repeat.
    7/18/2015 1:31:35 PM Insteon Received STX 0x50 (Raw Insteon Rec):36 FE F1 11 00 04 CB 06 00
    7/18/2015 1:31:35 PM Insteon Received message from HVAC Stage2 (36.FE.F1) taking hops: 1
    7/18/2015 1:31:35 PM Insteon Received STX 0x50 (Raw Insteon Rec):36 FE F1 11 00 04 CB 06 00 Debouncing repeat.
    7/18/2015 1:31:48 PM Insteon Starting Scheduled Polling...
    7/18/2015 1:31:48 PM Insteon ..Finished Scheduled Polling for 0 devices.
    7/18/2015 1:32:35 PM Insteon Edit Insteon Device #17 Addr: 0E.1F.DE, Name:Keypad, Location:Master Bedroom

    I can hear the new keypad beep when this process is attempted. I can see stuff in the log when I press a button on it, so it seems like comms are working. (Example below)

    7/18/2015 1:28:15 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 00 00 02 CB 11 00
    7/18/2015 1:28:15 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 11 00 02 CB 06 00
    7/18/2015 1:28:17 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 00 00 02 CB 13 00
    7/18/2015 1:28:17 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 13 00 02 C7 06 00
    7/18/2015 1:28:18 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 00 00 01 CB 13 00
    7/18/2015 1:28:18 PM Insteon Received STX 0x50 (Raw Insteon Rec):34 DD 44 13 00 01 CB 06 00

    Is there any hope for this?
    Thanks,

    Leave a comment:


  • joegr
    replied
    I think I'll just wait for the new switch then. That sounds less painful, assuming that replace-device will copy the links on the screen into the new keypad.

    Leave a comment:


  • mnsandler
    replied
    there is no way to reprogram the device links from the existing links on the screen.

    you should print the links screen for reference. then read the links which will clear all the links. then 'program device for homeseer', then add your links.

    Leave a comment:


  • joegr
    replied
    So, it looks like a factory reset may have the old keypadlinc working again. I changed it back from the default 6 button configuration to 8 buttons, but now I am at a loss as to how to reprogram the 60 or so links into it.
    I tried edit device links, but all it does is offer to let me delete the links (that are already out of the device anyway).
    It does say this "WARNING: Deleting links can cause devices to function improperly. Using the 'Reprogram links' and 'Reprogram group' options in the device and group edit page will restore the links that are managed by this plug-in, but NOT OTHER LINKS, SUCH AS THOSE CREATED MANUALLY BY TAP-LINKING DEVICES!"

    "Reprogram links" sounds like exactly what I need, but I can't seem to find it anywhere. I have HS2 with Plug-In v2.0.0.15.

    Leave a comment:

Working...
X